Question about 1999 Chevrolet Venture

1 Answer

Abs light came on and now doesn't go off. brakes were checked and are fine.

I have a 1999 Chevy Venture Minivan and the ABS light just came on last week. I had the brakes checked and the brakes don't need changed. Can you tell me what the problem could be? I am suppose to be driving across country in two months from Ohio to Montana and I can't afford to have a dozen different possibilities checked out before finding the problem. Any help would be greatly appreciated. Also, how do i find out what size my gas tank is?

Posted by on

  • brandenellis May 09, 2009

    Thank you! I needed new tires desperately and had new ones put on today. The light went off and hasn't come back on since. Could that have solved the problem?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 407 Answers

Did you have the abs system checked? may have a bad speed sensor at one of the wheels

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

6 months ago, replaced head gaskets. 1 week later, service engine soon light came on. Tech said it was an oxygen sensor. Cleared code. 3 weeks ago, got oil change, replaced headlights and replaced...


CHECK TURN SIGNAL FUSE.IT COULD BE BLOWED OR YOU HAVE FAULTY TURN SIGNAL SWITCH.BECAUSE BACK LIGHTS AND TAIL LIGHTS SHARE SAME CIRCUIT WITH TURN SIGNAL SWITCH.

Jun 26, 2011 | 1999 Chevrolet Venture

1 Answer

1999 Chevy Silerado ABS & Brake warning lights come on and stay on Restart Engine and lights disapear sometimes during a drive the will both reapear (alway all 3 indication lights) the ABS and...


The only real way to find out what is going is to have a diagnostic scan. You can go to auto zone and have it scanned for free but im pretty sure their scanners are for motor only, not abs. You need an abs scanner. Any garage should be able to scan. It could range in cost from$35 to$100 for a scan. Abs light could be a as simple as wheel sensor. The brake warning concerns me though. I would check your brake fluid. When was the last time you had new brake pads put on. You may have worn the pads so low, you have run down the brake fluid.i wouldnt drive until i found out what is going on with the brakes. any other help needed, just ask.

May 20, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

Just had new brake line , brake pads, rotors installed on my 99 chevy venture van, after coming out of the shop the abs light is staying on, why? thanks


Because you now have an ASB System Malfunction

Most common cause is a Wheel Speed Sensor

Now--was it damaged by the repair shop

or did they not bleed the system correctly

or not clear the ABS Light?

Dec 04, 2010 | 1999 Chevrolet Venture

1 Answer

Where is the abs sensor on a 1998 chevy venture


there are four ABS sensors. one behind each wheel in the hub assmebly just follow the shielded wiring harness down to the sensor, it is at the behind the brake rotor in the hub assmebly, the lock up problem is not the sensor, the function of ABS is to stop lock up of the wheel, this problem is caused by a leaking ABS hydraulic control unit, that is the part with all the brake lines coming out of it

Dec 12, 2009 | 1998 Chevrolet Venture Cargo

3 Answers

Grand Cherokee 1999 - ABS light went on solid ?


Not necessarily but the Check and ABS are there to tell you something. Take me to the repair shop fairly soon and correct

Sep 29, 2009 | 1999 Jeep Grand Cherokee

1 Answer

I have 1999 chevy cavalier. My ABS light is oh.


Drive it. Then have the rear abs brake sensors checked because they seem to be the first to go in a system like that. Someone with a scan tool should be able to read out any trouble codes in the abs system

Jul 08, 2009 | 1998 Chevrolet Cavalier

2 Answers

ABS TCS lights on Chevy Venture 1999


try bleeding thr brakes. might have a bit of air by a sensor in the abs system. check your fluid level.

Jun 08, 2009 | 1999 Chevrolet Venture

1 Answer

ABS control module "brake fluid pump" runs constantly.


I do not know anywhere that can repair the module, and yes one from a salvage yard is a good idea.

Apr 03, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

2002 Chevy venture indicator trouble


Try disconnecting your battery for about 30 sec to reset the ABS computer. You probly have a trouble code stored in the ABS computer and the lights are letting you know there was a problem. If the light stays on after you reset computer then you will have to pull code to troubleshoot problem.

Joe. ASE Master Tech

Dec 14, 2008 | 2002 Chevrolet Venture Passanger

Not finding what you are looking for?
1999 Chevrolet Venture Logo

425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...