Question about 1992 Oldsmobile Cutlass Ciera

1 Answer

How to remove an alternator from a 1992 Olds Cutlass Ciera

Just looking for some directon to help me remove the alternator so I can get it tested.

Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 187 Answers

You don't really need to remove the alternator to have it tested just take it to a repair shop and they can connect to it in the car. To replace the unit you need to disconnect the battery first. After that remove the wires remembering where they go. Make a sketch or take a digital photo like I do for when you get lost. Now on the top of the unit is a bolt that attaches the alternator to a slotted arm. This arm is the adjusting arm. Next loosen the main mounting bolt at he base of the alternator. With this done you should be able to move the unit in to get the slack needed to remove the belt. Last completely remove the main mounting blot and the alternator is lose. Revers the steps to install.

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to change my alternator in 1990 cutlass ciera need instructions


MY Alternator is not below it on the top of my 3.3 olds 1990.they are talking about the starter on the fix above not very helpful

Aug 05, 2011 | 1990 Oldsmobile Cutlass Ciera

1 Answer

I need to replace a power steering pump on a 1992 Olds Cutlass Ciera. How does one tackle that problem?


First you will need a pulley remover/installer. Remove the power steering belt, remove bolts holding the pump, remove p/s lines, replace in reverse order,and fill pump. Start car and move steering wheel back and forth slightly, then turn the wheel all the way stop to stop Always watch that there is plenty of fluid in the reservoir. Check with dip stick, should be full to bottom mark;

Jul 19, 2011 | 1992 Oldsmobile Cutlass Ciera

1 Answer

CRANK SENSOR LOCATION FOR 1992 OLDS CUTLASS CIERA


That year Ciera came with two diiferent engines. if you have the 2.5 liter engine it is located under the hood, center, rear engine area, below ingnition coil pack and DIS module, mounted in engine block. If it is the 3.3 liter engine it is located under the hood, passenger side, lower engine area, front of crankshaft pulley, mounted in engine block. i hope this helps you and good luck.


Mar 15, 2011 | 1992 Oldsmobile Cutlass Ciera

1 Answer

1992 olds cutlass cera turn flasher location. needs new flasher for turn signals where is it located ? dogmanntim@yahoo.com


If you remove the ashtray you will find the turn signal flasher behind it, a bit to the right (close to the fuse box).

Nov 28, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Crank pos sensor adjustment on 90 olds cutlass


You have got to space it by feel,so it does not touch either side of the reluctor plates,check the balancer reluctor plates to make sure they are not bent,and the balancer is not coming apart in the rubber part.

Apr 01, 2010 | 1992 Oldsmobile Cutlass Ciera

2 Answers

92 Olds Cutlass Ciera ignitian code needed


i dont have it but if you register at www.autozone.com you can get it for free and registering is free and they have all kinds of free help and diagrams for you

Sep 01, 2009 | 1991 Oldsmobile Cutlass Ciera

3 Answers

Where is the flasher relay on a 1990 Olds Cutlass Ciera?


the flasher relay is under the dash behind the ashtray

Aug 12, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

1992 olds ciera just shout off


Sounds like a ignition control module failure. Check for spark at a spark plug wire. No spark then suspect module failure. Good spark-- Suspect possible fuel delivery problem. If spark is good then fuel pump may have failed.

Mar 31, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

1992 Olds Cutlass Ciera S Speedometer Problem


get new speedo cable or check both sides and see if the wheel is broken on either side

Mar 19, 2009 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Cannot remove the pulley from my 1991 olds cutlass ciera 's water pump. Its a 4cyl. Plus the new water pump doesn't look quite the same.


I replaced my water pump on my 92 olds, and the pulley will look slightly different because it's newer, but just make sure its the right one. The pulley does not come off of the water pump, both the water pump and pulley have to be changed. Your new one should come with both the pump and pulley already connected

Jan 05, 2009 | 1992 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1992 Oldsmobile Cutlass Ciera Logo

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...