Question about Ford F-350

1 Answer

Turn signals hazards and brake lights are not working fuses good

The turn signals, hazards and brake lights stopped working on my 2001 F 350 crew cab. I have checked the fuses and they are fine. What could it be?

Posted by on

  • 2 more comments 
  • gregster1 May 18, 2009

    Ford F-350 Brake Lights, Turn Signal, and Emergnecy flashers not working. All fuses check good.

  • sophian_53 Jun 29, 2010

    help me all my signel car left,right and emergency not working how to fix the problem.....asap

  • David Hein Sep 06, 2013

    my turn signals work some what work but when i engage the stop lights the turn singal starts to flash very fast, all the fuses are good and relay i had a shop tell me that i might have a problem in the steering colum and some switch in there?

  • Anonymous Mar 15, 2014

    My turn signals & hazard lights and my brake lights don't work

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Did u check fuses under the hood on driver side lol yes ford has them thear also

Posted on May 24, 2009

  • desktopdiva
    desktopdiva Aug 17, 2012

    Yes all fuses are good

  • David Hein Sep 06, 2013

    yes all good this is a 2002 F 350 diesal

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Buick rendezvous turn signal, and brake lights, and hazards lights stop working


Check the HZDLFL fuse# 40 - 15amp in the console fuse block
Fuse Block - Center Console
Inside of console, behind the right console access panel , if the fuse is good the turn signal / hazard flasher module is bad.
Turn Signal/Multifunction Flasher Module
In the fuse block - center console

Dec 05, 2015 | Buick Cars & Trucks

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

1 Answer

Turn signal,brake lights not working


I would check for voltage at the turn signal switch. The brake lights go thru the turn signal switch, except for the high mount light.

Jul 24, 2012 | Cars & Trucks

1 Answer

I have a 2004 Silverado 1500. The rear lights won't turn off, pulled all the fuses associated with lights and they still don't turn off. In addition my right turn signal doesn't flash, both the...


Not sure, but I've heard a bad hazard switch can cause strange problems.
Also, if your truck has a body control module that controls interior and lights, that may be your problem, too. Good luck.

Jan 26, 2012 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

I have no signals and when brakes lights are on, lose brake light to either side turn signal is set on


Hi!!

If you activate the turn signal switch and you step on the brake pedal, the turn switch (on the steering column) deactivates the brake light to make the signal light more visible. The bulb for the stop and turn lights is the same.

Turn hazard lights ON. If they don't blink, replace turn/hazard flasher, If one or more lights don't come on, replace bulb.

Check fuse and circuit wiring for broken or loose connections. If all looks fine, check following:

If front turn lights work fine, check brake/turn bulbs.

If turn lights come on but don't blink, replace turn signal/hazard flasher.

If front and back turn lights don't come on, replace switch on column.

Let me know how it worked out, Good Luck

Mar 24, 2010 | 1991 Plymouth Acclaim

1 Answer

2004 Ford f-250 diesel. The hazard lights and turn indicator lights do not work. The fuse is good. The problem is not in the multifunction switch. I can not find a flasher relay.


Ford is notorius about the hazard switch going bad in the column. I have three trucks from 95 thru 02 that have the same problem. we just don't use the hazards and the turn signals work.

Oct 26, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

2000 Chevy CK, have hazard lights, turn signals,


test your brake switch located on the brake fulcrum. you can unhook the wires and usea paper clip to connect the two wires together if the brake lights come on then replace the switch, if it does not come on and the bulbs are ok then replace turnsignal switch.

Jul 18, 2009 | 1999 Chevrolet 3500

1 Answer

Checked all fuses-good, swapped bulbs-good, hazard lights-good, head lights good, turn signals-good but no brake lights. 1995 chevy silverado


Does the turn signals or hazards work in the rear?? Yes... it may be the brake switch or the turn signal switch (power goes from battery, to the brake switch then to the turn signal switch, then to the lights. No? .. again.. possibly turn signal switch or the wiring between cab and bed.

Jun 04, 2009 | 1996 Chevrolet K1500

1 Answer

My hazard lights and turn signals stopped flashing


i bet you have a bad multi function switch or turn sig switch. good luck

Oct 25, 2008 | 2006 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...