Question about Pontiac Vibe

Open Question

2004 vibe clutch ignition switch bypass - Vibe Pontiac Cars & Trucks

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is there anyway you can bypass the neutral safety switch?

there is you have to locate it depending on it being standard or automatic a neutral safety switch is a switch the creates a loop when in park or neutral (might be found on shifter or trans side) on standards they are usually on the clutch pedal engine won't crank until either in park or neutral or when clutch pedal is depressed find switch and unplug it and jump wires bypassing switch keeping the circuit closed and engine should crank over while in gear with no clutch or in any gear p r n d 1 2 ect wouldn't recommend doing this however not sure why you looking to bypass this switch but can be dangerous especially in standard vehicles reaching into the vehicle to start it forgetting its in gear it could start a take off or crank and not start but lurching forward or backward

Apr 22, 2015 | 2005 Pontiac Vibe

1 Answer

What fuse controls the coils on a 2004 pontiac vibe

there is not likely a fuse for the coils alone but theee should be an ignition fuse

Dec 11, 2014 | 2004 Pontiac Vibe

1 Answer

How can I reset the security lock for a 2004 pontaic vibe

Most Common Solutions:
  1. not sure (11 reports)
  2. wait 20 minutes with the key in the ignition (9 reports)
  3. wait 10 minutes with the key turned to the on position(6 reports)
  4. did the bypass of the passlock (1 reports)
  5. hit the dashboard! (1 reports)
  6. replacement (1 reports)

Aug 23, 2013 | Cars & Trucks

1 Answer

Broken clutch ignition lock switch

Called the clutch switch, or clutch safety switch. Buy a new one, buy used from a junkyard, or bypass the switch by connecting the wires together. Those are pretty much your choices.
Good luck.

May 29, 2012 | 1994 Honda Civic Del Sol

1 Answer

My 2004 Mitsubishi Lancer will not start. I think it might be the clutch pedal switch but I am not sure. I took it off and tested it with my ohm meter with it having no resistance while disengaged and...

Use your meter to check for power at the clutch switch when the key is turned to start. If no power, the ignition switch or wire from the switch is bad. If the is power, the starter solenoid is bad.

Do It Yourself Diagnosis and Repair

Nov 11, 2017 | 2004 Mitsubishi Lancer

1 Answer

2006 Pontiac Vibe ignition cylinder not working

lubricate cylinder and use compressed air to clean. if that does not work replace cylinder.

Nov 03, 2009 | 2004 Pontiac Vibe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides