Question about 1993 Chevrolet Corvette
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your last guess is probably the right one. The deflectors/directors are vacuum controlled and you may have vacuum line either broken or disconnected; these aren't fun to find. I would start under the hood and make sure the vacuum reservoir is intact (have seen them cracked) and then start tracing hoses from there.
Posted on Aug 18, 2009
Testimonial: "ellent advice and responed very quickly. Thank you."
you need to replace the temperature actuator on the left side of heater evaporator case, also ck the blower resistor and connection that should fix ya up.
Posted on Nov 04, 2009
Is the inlet and outlet heater hoses hot and if so you have a seperate acuator for your hot/cold door.Check for vacuum there if you have vacuum to the acuator then it must be a faulty acuator or jambed door.
Posted on Dec 21, 2009
If you are absolutely confident the AC compressor is not kicking out on low pressure then it is the blend door actuator.
The blend door determines how much air blows through the heater core or evaporator.
The actuator can be purchased at dealer and maybe at a local part store.
Posted on May 27, 2010
It sounds like you either have bad controls or stuck dampers in your vents. The stuck dampers are usually caused by plant debris getting in to the air system.
Posted on Jun 07, 2010
Tips for a great answer:
Nov 11, 2013 | 1994 Chevrolet Corvette
Sep 09, 2013 | 1990 Chevrolet Corvette
Aug 26, 2012 | 1981 Chevrolet Corvette
Dec 12, 2010 | 1993 Cadillac DeVille
Sep 24, 2010 | 1994 Chevrolet Corvette
Dec 21, 2009 | 1992 Chevrolet Corvette
Nov 04, 2009 | 1998 Chevrolet Corvette
Aug 18, 2009 | 1996 Chevrolet Corvette
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: