Question about 1998 Oldsmobile Cutlass
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It's not to hard to do, just have to lay upside down in your pas. floorboard, remove plastic panels under gloove box with small nut drivers,(can't remember size) then there are three hex head screws holding on the blowerplus the wireing connector, anf it has a wierd rubber gasket, hope this helps.
Posted on Sep 12, 2008
remove lower right dash insulator panal from beneath glove box. slide bcm aside to get to blower. remove the three screws holding the blower motor, pull blower and fan straight out. remove fan from old blower if replacing with a new motor. good-luck!!
Posted on Aug 12, 2010
Posted on Dec 15, 2012
Tips for a great answer:
Aug 13, 2013 | 1991 Oldsmobile Cutlass Ciera
Jan 22, 2011 | 1999 Oldsmobile Cutlass
Oct 03, 2010 | 1994 Oldsmobile Cutlass Ciera
Oct 02, 2010 | 1992 Oldsmobile Cutlass Supreme
Jul 17, 2010 | 1999 Oldsmobile Cutlass
Jun 30, 2017 | 1993 Oldsmobile Cutlass Supreme
May 28, 2009 | 1972 Chevrolet Corvette
Jul 12, 2016 | 1998 Oldsmobile Cutlass
254 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: