Question about 2001 Chrysler Concorde

Open Question

Transmition? my car started jerking really hard so i pulled over and shut it off, when i started it back up it wudnt shift..it was at 4000rpm at 35-40 mph. i drove to work and when i left work it was shifting fine-no problems until i stopped at a stop light then the car died and it starts back up and runs just fine until i put it in gear, then it dies every time...please tell me its not my transmission

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

picatudo
  • 239 Answers

SOURCE: Car huts down and dies out when I pull uo to a light or a stop .

simple , new fuel pump!!!

Posted on Jan 01, 2009

  • 2920 Answers

SOURCE: 1998 Chrysler Sebring JXI V6 2.5L Transmission Problem

it sounds like the transmission solenoid or possibly the transmission itself trying to go out

Posted on Jan 15, 2009

  • 548 Answers

SOURCE: Transmission down shifts hard

Check the trans fluid for quantity and color. If it is not a good red color, try having it changed and get the filter cleaned. If that looks okay, you may have a bad shift solenoid. Look for leaks around the trans case. Leaks on top around the solenoid are a sign that it is going bad.

Posted on Jan 31, 2009

  • 1 Answer

SOURCE: my chrysler voyager 2003 just lost power when on the road

did you find problem in fuel pump maybe same as all chrysler grand voyager diesel car they fix .

Posted on May 05, 2010

  • 973 Answers

SOURCE: Everything works fine on my vehicle EXCEPT today

Check the fuse for those items that don't work.

Posted on May 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 mazda mpv jerks to the left then straightens back out. This usually happens when I have to accelerate really fast or right about the time it shifts into the last gear.


Mike, this may be because the left wheel is the dominate drive axle (left axle locks up and pulls hard, while right side slips) when under power. Vehicles that do not have possie drive differentials have this pulling characteristic.

Apr 01, 2016 | Mazda Cars & Trucks

2 Answers

Car jerks hard taking off


Since you\'re old school I would think you\'ve already checked the normal stuff like the fluid level in the transmission. If this is good, has the transmission ever been serviced? I\'m not familiar with your vehicle so if it has a filter it could be that is partially clogged, Does the fluid have a strong smell to it? Does is feel absolutely smooth or can you feel or see little flecks of something in it. You may solve this by dropping the pan and replacing the filter. But if that is the problem it will only be temporary as if there is debris in the pan you are ready for a rebuild.The sooner you do it, the better before you have hard part damage. Another possibility is a bad solenoid in the tramsission that isn\'t sensing the pressure until it is high enough to jerk when it kicks into gear. Again to even check this though you need a transmission guy to pull it and look it over. Sorry guy.

Mar 23, 2014 | 2007 Pontiac G6 GT Convertible

1 Answer

Engine revving up when shifting gears and jerking hard


Really !!!

You have no idea after all those issues that the
transmission is completely worn out?

If it had any chance of repair, you rode it to it's
grave knowing you could hear & feel things

Nov 19, 2012 | 2007 Volkswagen Jetta 2.5 Sedan

1 Answer

I have a 2002 Mazda MPV. When I start it and drive it revs really high. Sometimes i can take my foot off the gas and it will still accelerate, A LOT! Also when it does this it shifts really hard and there...


The transmission is slipping, have it checked for low fluid level, if that is ok then you need the transmission rebuilt or replaced with a factory rebuilt exchange unit.

Sep 06, 2012 | 2002 Mazda MPV

1 Answer

Hi i got a 1992 chevy silverado with a thm700r4 tranny, now i just had it pulled and replace the front pump seal, pump bushing and a couple other seals, put it back in and now when i put it in drive, it...


Hello
First check and verify the Detent cable is hooked up and not broken or disconnected. Have you done that? if so then you will need to adjust the cable. Below is a link to a how to page on the whole procedure.

http://www.tciauto.com/Products/Instructions/instructions/gm_tv_cable_adjust.htm

Feb 25, 2011 | 1992 Chevrolet C1500

1 Answer

Hard shifting


after checking oil level in auto box(top line on dipstick in "P")try this,without using any gas at all,put into drive and let car reach max speed (about 30/35).then using half gas do the same, without moving your right foot,then if safe do the same, with full gas.as the gearbox is computer controlled, you have just reset the shift pattern back to its start position.The car will now change according to your driving style,(if multi user,it will take about 50m to read your style again)
if driven hard it will change hard.......
any help??

May 02, 2010 | 2003 Volkswagen Jetta TDI

1 Answer

Shifts hard and jerks


replace the vehicle speed sensor,yours probably has metal shavings,or dirt stuck to it.

Aug 17, 2009 | 1993 Ford F150 SuperCab

1 Answer

97 yukon 4wd. Jerks and makes noise like its


Hi amberdawn_84

My 97 yukon did the same thing (I believe). The valve body in the transmisson wears out (design problem) and causes the transmission to shift really hard. My repair was about $500 (nondealer).
LOVE MY YUKON!

Apr 23, 2009 | 1997 GMC Yukon

Not finding what you are looking for?
2001 Chrysler Concorde Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...