Question about 2003 Dodge Durango
Its common either ur thermostat sticks or water in wire harness a block warmer is a good route you can pick em up at a parts store or order one
Posted on Nov 29, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The pickup tube is a bad design in these engines, I have fixed several with the same problem, you can weld on a GM screen move it 1/4 of a inch away from the pan or add 1 inch to the bottom of the pan, (use a high volume pump) the problem is the screen is too close and too small and will pick up any sludge off the bottom. also it's great to make a access plate on the bottom of the pan using a Volkswagen Bug oil cover plate, it can be removed with bolts after a oil drain to clean the screen without the hassle of removing the whole oil pan by lifting the engine on these trucks. Good Luck
Posted on Feb 20, 2009
SOURCE: Losing Oil Pressure in Dodge Ram
I have a 1999 dodge ram with a 5.9liter. Come to a stop and bam no pressure. Replaced sending unit twice. First after market, then mopar. Problem is still there. Replaced pump. Problem was still there. So I talked to tons of dodge mechanics, and this is the real problem. Who ever said that these engines are none for sludge is just reall really stupid. BOTTOM LINE ON THAT FACT. Sludge comes from neglect...
Dodges oil pump makes 8-10 Psi at idle. Always mechanically test that no MATTER what. But the sending unit needs 12-14 psi to read it. So what happens is the engine warms up, and the oil thins. Then you come to a stop, and rpms are low, and your not producing enough psi for the sending unit to read it. So your truck is fine. But if the chime is getting to you. Install a high volume pump. I returned the stock one, and got the high volume pump. I will bet if you change your oil every 3,000 miles you will not see sludge at all. If your dodge has high miles replace valve cover gaskets, becauce the high volume pump may cause the gaskets to leak. Whoever said ther none for sludge just has no love for a dodge, or is a moron mechanic that is stuck in his ways. High volume pump is the fix $85.00 plus pan gasket. If you have a 4x4 you can do it yourself. Drop the starter. Remove torque converter cover. With a 13mm socket with a variety of extentions, and removing a dozen bolts. Do it yourselfer will complete it in 4 hours....
Posted on Mar 24, 2009
Had the truck the truck to the shop and they said it was the sensor. I had it replaced and it hasn't screwed up since. If you search out this problem on the net, this is a problem with engine and its oil pressure sensor. Apparently, Chrysler is aware of the problem.
Posted on May 17, 2009
Tips for a great answer:
Apr 08, 2013 | 2006 Ford F-150
Mar 31, 2011 | 1991 Ford F150
Feb 01, 2011 | 1991 Toyota Pickup
Jan 24, 2011 | 1999 Chevrolet Silverado 1500
Jan 04, 2010 | 2000 Jeep Grand Cherokee
Sep 28, 2009 | 1999 Chevrolet Silverado 1500
Sep 29, 2008 | 2005 Chevrolet Trailblazer Ext
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: