Question about Mitsubishi Lancer

Open Question

Lancer stock amp and sub - no sounds with after market head unit

Wiring a MITO-02 harness to my new Pioneer DVD headunit. the unit is turning on but there is no sounds. Everything works but the sounds!! it is for a MY 13 VRX Please help!

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22219 Answers

SOURCE: Front Speakers And Stock Sub Stop Working HelP!!!

do you need all this noise whilst driving the car,could you hear an emergency vehicle ??check the fuses first and connections ,try speakers direct to radio

Posted on Nov 13, 2008

Ad
jmeyer847
  • 185 Answers

SOURCE: installing after market stereo

Dave,

You will need to go buy a wiring harness adapter from your local Walmart (usually cheapest there) or Local Electronics place (ie Best Buy). The wire harness that goes out from the radio goes into the Adapter and the adapter plugs into the car harnesses. Also these Adapters come with the wiring diagrams for your vehicle. They typically run 10 - 15 bucks depending on where you get them. Thanks for using FixYa!

Sincerely,

JC

Posted on Nov 21, 2008

michigan man
  • 3533 Answers

SOURCE: 02 GMC Sierra Denali Radio

if they do not help you here is a place that sell only GM parts it is a place call schram auto& truck parts the # is 1-800-292-1032 and they can even sell you the right one for your truck if needed.

Posted on Feb 07, 2009

  • 3679 Answers

SOURCE: Need help in wiring an after market radio in 1988 jaguar

Are you sure the radio itself is in good working order,dont want to seem patronising but should always start with the new part (what ever it is ) as a process of elimination

Posted on Mar 09, 2009

emissionwiz
  • 76630 Answers

SOURCE: wiring harness adaptor for mitsubishi lancer.I

any auto sound shop will have these harness adapters, u can also get them at this web site, call for your application.

http://www.crutchfield.com/S-3j7E0ez3KTK/

Posted on Apr 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i hook up a parakeet model number PWM 16 to my factory stereo in a 98 Ford Expedition


About 3,970 results (0.89 seconds) Search Results

    Ford Bluetooth® Wiring Harness - Crutchfield

    www.crutchfield.com/.../Ford-Bluetooth-Wiring-...

    Crutchfield Corporation
    Rating: 4.5 - ‎16 reviews - ‎$19.99 - ‎In stock
    Reinstall the factory radio and mount the Bluetooth kit, and you're ready to go. ... 16Reviews ... harness so that I could hook up an aftermarket amp to my factory radio.... works like it's suppose to. says it doesn't work on an 09 Escape but had no .... I purchased this harness to install a parrot ck3100 in my 07 Ford Edge.Missing: pwm

    70-5521 wiring harness for ford with 6 CD premium sub amp ...

    ? 4:30
    https://www.youtube.com/watch?v=0jqNafnki0o
    Aug 9, 2013 - Uploaded by codieraji
    Metra 70-5521 Radio Wiring Harness for Ford 03-Up Amp FordPremium stereo radio 6 CD changer with sub amp inputs. ...16:47. How to wire an aftermarket radio / I Demo install with metra harness and antenna ... How to hook up stock amp/sub to aftermarket head unit "ford sport trac" - Duration: 3:01. Pat.Missing: parakeet ‎pwm ‎98

    Car Stereo Wire Harnesses - Radio Wires for all Car Audio ...

    www.installer.com/main.php?page=harness
    Car Stereo Wire Harnesses - Car Stereo Installation Wiring - Stereo Harness ... If you

Feb 09, 2016 | Ford Cars & Trucks

2 Answers

I bought a sony deck to replace the bose stock deck on my 1996 nissan maxima. I purchased the wiring harness and antena adapter also. I hooked everything up right and getting power but im not getting no...


each speaker in your car runs the wiring thru an amp. So each spkear has its own amp for the bose system. You can not hook up a none bose radio If you do you will need to run new wires and replace all the speakers. Sorry.

Jul 02, 2011 | 1996 Nissan Maxima

1 Answer

I have an 02 ford explorer, the previous owner had a custom sound system installed. He took allof trhe custom speakers and amps out but left the stereo in,but it does'nt play. the stereo work ands powers...


sounds the like the vehicle had an oem amplifier that was removed, most after market stereo installers will trace the speakers wires individually by continuity to by pass the factory amplifier and wire the new head unit to the vehicles speakers, if the harness has been spliced or factory amp removed, you will need to check if the amplifier still exists (usually under passenger rear seat sometimes located in trunk area) and see if the harness has been bypassed. if so you will have to reconnect the harness by color code in order to use the factory head unit

Feb 18, 2011 | Ford Explorer Cars & Trucks

2 Answers

2 din radio of when headlights on


Its the ignition live wire! they are nearly always yellow but please check your diagram. you will need to connect it to live.

Jan 15, 2010 | 2004 Mitsubishi Lancer

1 Answer

I am trying to hook up an aftermarket stereo to my 2008 mitsubishi lancer. the wiring harnesses (metra 70-7005 and mito-02) that i have do not appear to line up with the mitsubishi wiring. when turned on,...


Power to most radios is the red wire and ground is black. Do not mix up the two and make sure your plugs match "red for red" and "black to black" (the ground some times will also be green). If not you can blow a fuse in your box which you might need to check. If you have a meter you can check your car harness plug to see if you have 12 volts on your red coming out. If not make sure your fuse is good and you have the power on in the car (key turned backwards on most cars will power the harness if not turn if forward like you are going to crank it. If you are not sure the radio is good, you can pop the hood of your car and hook up the red wire from the radio to positive side of the battery cable and the black to the ground side of the battery cable and you should be able to turn the radio on. If you see it power up, you will know your problem is in your harness. Hope this helps

Oct 02, 2009 | 2008 Mitsubishi Lancer

1 Answer

I recently was trying to install a 10 inch pa sub with a 3/6 inch tweeter and in the process snipped the black and red wires connected the sub it did not come on I then snipped the blue and red wires in...


sounds like you blew some fuses replace them. then reconnect stock wiring. the get after market deck, amp, and wiring that in it's color coded so it no that hard to do.that 10 inch pa speaker pulls a lot power plus it 8 ohm impudence. your going to need at least a 200 watt amp.bridgeable.
or single channel.

Sep 20, 2009 | 1995 Ford Escort

1 Answer

Dash board, head unit/ subwoofers 2005 saab 93


www.crutchfield.com has a "what fits" section, it will allow you to pick a new head unit that will fit the stock size of your SUV. As for as Amps, a Bass tube or Subs, they will help you too. They sell you have any thing you will need. Remember, this tip, grounding cables need to be drilled or bolted to a non-painted surface to the chassis.

Aug 20, 2009 | 2006 Saab 9-7X

1 Answer

02 GMC Sierra Denali Radio


if they do not help you here is a place that sell only GM parts it is a place call schram auto& truck parts the # is 1-800-292-1032 and they can even sell you the right one for your truck if needed.

Feb 05, 2009 | 2002 GMC Sierra 1500

1 Answer

2001 Audi A6 how to bypass the original amp


Hi there,

The stock amp (mounted inside the sub enclosure) found on the RHS of the boot behind the pull out pannel has a red plug with 8 twisted pairs of wires and 3 other wires (pos, acc and earth).

Out of the twisted pairs you will have

RHS Rear Speaker: Blue/Gray +, Gray/Blue -
LHS Rear Speaker: Red/Gray +, Gray/Red -

You will also have a pair of White/Blue and Brown/White which is the RHS input and a White/Red Brown/White pair for the LHS input. Although... the stock amp uses a common earth input as you will see, the two Brown/White wires going into the same plug.

To put in another amp, you will need one with 'high level' input. Make sure it can take a common ground type input. If it cannot then just use a "high level to RCA" converter.

If you are putting in an after market headunit like i did, then you will just need to separate the two brown/white wires at both ends. If you do this you will need to test which brown/white wire at the head unit end is paired with which wire at the amp end. They are twisted together at the amp end but not at the headunit end (unless you cut the cloth tape back far enough).

Dec 11, 2008 | 2001 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...