Question about Volkswagen Beetle
Sounds like you have striped out your steering box. I would start there as long as everything is hooked up as it should be.
Posted on Nov 28, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi,if you turn the steering wheel in pull position,left or right it's normal to have whining noise,the system is sefl-bleeding if there is air ,ty
Posted on Mar 27, 2009
Testimonial: "Thank you Mr.Domingo! You were correct."
power steering pump might need more oil (whining noise). generally power steer pumps take automatic transmission fluid. there should be a reservoir above the pump only fill this a little bit then start the car and turn left to right and recheck level. fluid should only be low if there is a leak at power steer pump/lines or steering rack,
Posted on Jul 29, 2009
check your cv axles in the front end. they are basically your drive axles. the popping while turning is usually the outer boots on the axle shafts have torn and the grease inside the boots has ran out causing the shaft to be dry and click or pop when steering. usually you can replace the boot thats torn but it must be done within a few days of it tearing otherwise you will need to replace the axle shafts.
Posted on Aug 10, 2009
Tips for a great answer:
Mar 16, 2016 | Cars & Trucks
Feb 02, 2014 | Toyota Tacoma Cars & Trucks
Nov 12, 2013 | 2005 Chevrolet Malibu
Sep 15, 2010 | 2006 Chevrolet Malibu
Aug 27, 2010 | 1999 Volkswagen Beetle
Feb 23, 2010 | 1996 Jeep Grand Cherokee
Aug 05, 2009 | 1997 Subaru Outback
Mar 06, 2009 | 1995 GMC Safari
Jan 25, 2009 | 2000 Ford Explorer
Jan 21, 2009 | 2004 Pontiac Grand Am
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: