Question about 2002 Honda Civic

Open Question

2002 honda civic cylinder head torque specs 1.7L

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

Posted on Jan 01, 2009

  • 149 Answers

SOURCE: spark plug torque for honda civic si?

Spark Plug Type NGK: PFR6F-11 DENSO: PKJ20CR-M11 Gap 1.0 - 1.1 mm (0.039 - 0.043 in) 1.3 mm (0.051 in) Torque 18 Nm (13 lb ft)

Posted on Mar 06, 2010

  • 12 Answers

SOURCE: head bolt torque specs for 200 honda accord 3.0

its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs

Posted on Apr 25, 2010

walleyracing
  • 76 Answers

SOURCE: hi what is the head torque on a 2002 honda civic

Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then

    1. Tighten the cylinder head bolts to their final torque specification in 4 steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).
    1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
    2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
    3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
    4. Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).


  • Posted on May 03, 2010

    • 334 Answers

    SOURCE: need torque specs for bolts

    Hello claudian1535,

    Below is an image showing the torque sequence. The torque procedure is a three step process:

    Step one torque all head bolts to 14 ft.lbs.
    Step two torque all head bolt to 36 ft.lbs.
    Step three torque all head bolts 49 ft.lbs.


    netvan_116.png

    I hope this helps.

    Regards,

    netvan

    Posted on Jul 23, 2011

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    What are the spark plug torque Specs on a 95 Honda Civic LX 1.5 liter.


    Torque Chart - E3 Spark Plugs

    e3sparkplugs.com/torque-chart/
    The table below lists the torquing specifications for most spark plugs being installed in either cast iron or aluminum cylinder heads. Torque values assume clean, dry threads.

    Tech Specs - Spark Plug Cross Reference, Torque ... - Autolite


    Nov 25, 2015 | Honda Cars & Trucks

    1 Answer

    Whats the reason for a honda.02 civic.is overheating and the raditor hose comes.off n spills all over


    Exhaust gases are released into the cooling system due to which it is building excessive pressure in the cooling system.
    Before entering into the major repair, ensure the operation of radiator fan and re-torque the cylinder head bolts in proper sequence when the engine is at room temperature.
    If the problem persists:
    - Clean the radiator.
    - Replace the cylinder head gasket with a genuine one.
    - Surface grind the cylinder head.

    Apr 26, 2015 | 2002 Honda Civic

    1 Answer

    Torque spec on head for 1986 civic si 1.5liter


    Help need torque spec for cylinder head bolts 1986 honda civic dx 1.5 pls...

    Mar 10, 2012 | 1986 Honda Civic

    1 Answer

    99 Honda civic 1.6 engine torque specs and sequences for cylinder head


    Tighten the cylinder head bolts to their final torque specification in two steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts.
    1. Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
    2. Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).

    zjlimited_1681.jpg

    Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)

    Hope helps.

    Aug 05, 2011 | 1999 Honda Civic

    1 Answer

    Need torque specs for bolts on head of my 2002 honda civic ex v-tech 1.7 engine. just fixed them about a week ago and have to fix them again


    Hello claudian1535,

    Below is an image showing the torque sequence. The torque procedure is a three step process:

    Step one torque all head bolts to 14 ft.lbs.
    Step two torque all head bolt to 36 ft.lbs.
    Step three torque all head bolts 49 ft.lbs.


    netvan_116.png

    I hope this helps.

    Regards,

    netvan

    Jul 21, 2011 | Honda Civic Cars & Trucks

    1 Answer

    What is the torque spec on the cylinder head on a 1999 Honda civic PC?


    Hello a_mac40,

    Below is the tightening sequence for your Honda.

    netvan_11.png

    Regards,
    netvan

    Mar 08, 2011 | 1999 Honda Civic

    1 Answer

    Hi what is the head torque on a 2002 honda civic


    Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then

    1. Tighten the cylinder head bolts to their final torque specification in 4 steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).
    1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
    2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
    3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
    4. Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).


  • Mar 25, 2010 | 2002 Honda Civic

    2 Answers

    Replacing head gasket on 1995 honda civic, require torque specs and secquence


    wow. a lot of bad information on this site. Refer to a manual for the proper torque sequence. The civic I believe is a two step torque procedure. First 22 ft lbs, than 53 ft lbs.

    Sep 13, 2008 | 1995 Honda Civic

    Not finding what you are looking for?
    2002 Honda Civic Logo

    Related Topics:

    17 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8152 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...