Question about 2003 Suzuki Grand Vitara

1 Answer

It's wont pull in low gears flies in higher ones no problem

Posted by on

  • 3 more comments 
  • Carole Jones
    Carole Jones Nov 28, 2013

    clutch has now completely seized

  • SSN-MM3 Nov 29, 2013

    clutch? so it's a stickshift? you have several choices

  • SSN-MM3 Nov 29, 2013

    clutch? so it's a stickshift? you have several choices

  • SSN-MM3 Nov 29, 2013

    1- have new clutch pad installed

  • SSN-MM3 Nov 29, 2013

    2- buy a new car either choice depends on how much $$$ you want to spend. #1 is obviously cheaper but do you have the cash to get it fixed? my decision would be to to find a quality used car a few years newer and cut your losses on a 10 year old car. for little more than the cost of transmission work, you can get a running newer vehicle

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

Hi mileage? check tranny fluid if auto tranny for burnt smell. lower gears may be worn out

Posted on Nov 28, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My question is I have a Hyundai 2006 while im driving the car go to D and D1D2D3.when is in D1 it dnt wanna drive fast .I wanna know what cause dats my first car and I love the car .please help me


All transmissions start in a low gear that is not meant for speed. When it is in D1, the transmission stays in 1st gear and wont move to a higher gear by itself. When you select D2 it starts in 1 and moves to 2 and then wont move any higher.

May 26, 2015 | Hyundai Cars & Trucks

2 Answers

1992 subaru legacy starter wont engage fully and makes a loud grinding noise


Sounds like it is not toughing 100% and making full gear contact with the fly-wheel. Replace starter or the misalignment can burr the flywheel causing rounding and subsequent damage to the device.

May 09, 2014 | 1992 Subaru Legacy

1 Answer

96 ford wont go into park, drive, or reverse unless in 4 wheel low


Is this a auto or Manual I ask as you say flywheel and all gears. tall us a little more. what is the gearbox ?. have you looked at the oil level and under it at the rear tail shaft, crosses. in 2 wheel drive and running can you get it into park. DON'T try to hard at this as it can damage the auto. If you can drive in 4 wheel low in all gears then it sounds like you may have a problem in the drive line. Tall us more

Jan 07, 2013 | 1996 Ford Explorer

2 Answers

My suburban with 4l60e wont shift out of 2nd gear. when you put it in drive, it does fine til time to go into 3rd. it seems to just go into neutral, letting the rpms fly so i just put it in 2nd gear and...


The check engine light should be on. With a scanner pull the transmission control codes. and follow up on their leads speed sensers ( thiers 3 and shift soliods ( thiers 4) the connectors and the wires and more likly to be a problem than hard parts as this transmission is thris on up shifteed sllectonically

May 09, 2011 | 1999 GMC Suburban

1 Answer

1999 3500 dodge 4x4 dually, 47re Tranny. problem existed before and after having my Tranny rebuilt. tried 4 new valve bodies even a new BD VALVE BODY. Truck starts out in 2nd gear when put into...


the transmittion keeps shifting in & out of gear between 45 & 50 mph it shifts to a higher gear then a lower then higher then lower till I get above 50 mph whats the problem & how to fix it

May 03, 2011 | 1999 Dodge Ram

1 Answer

I have a 2002 mustang GT 5 speed,and it grinds going into 3rd gear,every other gear is fine,any suggestions? thanks steve


these are just some suggestions to help diagnose, 1. check gear oil level low level can cause gear free spin if not efficient amount of gear oil causing a grind as entering gear. 2. If you do some agressive driving, or rest your foot on the clutch frequently while driving, can cause excessive heat in clutch causing warpage of clutch or flywheel, once it is warped will cause vibration to transmission causing shifting issues sometimes only in one gear if you have a service boot on your transmission bell housing you can pull this of and monitor smoothness of clutch an fly wheel while running and tranny in nuetral excessive runout is a sign of something warped. 3. is not so not easy most of the time third gear is the main gear for the syncronizers, generally the first gear to show issues when they are failing, The transimission would have to be pulled torn apart and inspected to truly diagnose this as your problem. Good luck

Apr 13, 2010 | 2002 Ford Mustang

1 Answer

97 Ford Power Stroke, starting problem.


Does the starter engage the drive gear with the action of a solenoid? It may not be pushing (pulling) the gear far enough. There may be a slipping ring gear on the flex-plate. If you pull the starter again, you can try to see if the ring moves in and out or appears to be slipping around on the flex-plate. The flex plate could be loose on the crankshaft. In any case, the engine or the transmission would have to come out. Check the starter engagement before removing the torus and flex-plate.

Sep 14, 2009 | 2001 Ford Super Duty F 450

2 Answers

Fly wheel ring gear replacement


You need to pull the tranny out.
Then the flywheel needs to be unbolted from the engine.
if it's an automatic, purchase a new flywheel, if its a clutch, you can have a new ring gear pressed on to the flywheel...

May 28, 2009 | 1984 Ford Bronco II

Not finding what you are looking for?
2003 Suzuki Grand Vitara Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...