Question about 2005 Toyota Corolla

Open Question

How to release spring holding headlight bulb passeger side 05 corrola hatchback

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 151 Answers

SOURCE: I cannot seem to change my headlight bulb on the

I am not familar with your specific car but as you say already have the boot and connector already off, look at it and see if there is not some sort of wire retainer holding the bulb in place. If so, release it. The other possibility is the bulb retainer twists in to openings to secure the bulb. attempt to twist the bulb. It is difficult to see down there so get a small mirror and angle it to see what you are dealing with. Good luck

Posted on Feb 21, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing low beam bulb on 05 subaruoutback


Whether they become damaged in an accident or simply burn out over time, your Subaru Outback's headlights may eventually need to be replaced. Fortunately, once you've purchased the right replacement bulb for your model year, performing the repair yourself is relatively easy. These instructions only apply to Outback models made after 2000.

  1. Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment (driver's side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Turn the bulb cover counterclockwise and remove it from the assembly.

  4. 4

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  5. 5

    Pull the old bulb directly out of the socket and replace it with the new one. Press the retaining spring back into place and reattach the electrical connector.

  6. 6

    Replace the bulb cover, and then turn on the engine. Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

    Replacing the High-Beam Bulbs
  1. 1

    Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment ( drivers side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  4. 4

    Turn the headlight bulb counterclockwise and pull it out of the socket.

  5. 5

    Reinstall the new bulb, replace the retaining spring and reconnect the electrical connector.

  6. 6

    Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

Sep 14, 2012 | Cars & Trucks

1 Answer

How do you remove the headlight bulb


  • Take the keys out of the ignition and switch the headlights off. Then, open the hood using the primary and auxiliary release latches.
  • 2 Use a socket wrench to remove the two 10mm bolts holding the coolant overflow bottle in place. Pull the bottle out of the engine compartment and set it on the ground (passenger's side bulb replacement only.)
  • 3 Undo the bolt at the top of the air filter box, lift the top open and remove the filter from the engine compartment. Then, undo the fasteners holding the air dam in place and remove it from the filter box (driver's side bulb replacement only.)
  • 4 Pull the entire air box out of the car to access the backside of the headlight assembly.
  • 5 Turn the bulb socket counterclockwise to remove it from the assembly. Then, release the retaining spring, undo the electrical connector and carefully remove the old bulb from the socket.
  • 6 Hold the new bulb by its plastic base and insert it into the socket. Reattach the electrical connector and replace the retaining spring.
  • 7 Switch the headlights on to test the new bulb. If it works, reinstall the air box or coolant bottle and close the hood



  • Dec 04, 2010 | 2000 Nissan Altima

    1 Answer

    I cannot seem to change my headlight bulb on the passenger side of my 2007 yaris hatchback. In the owners manual it sayds to puul out the rubber boot. I disconnected the cord going into the headlight but I...


    I am not familar with your specific car but as you say already have the boot and connector already off, look at it and see if there is not some sort of wire retainer holding the bulb in place. If so, release it. The other possibility is the bulb retainer twists in to openings to secure the bulb. attempt to twist the bulb. It is difficult to see down there so get a small mirror and angle it to see what you are dealing with. Good luck

    Feb 20, 2010 | 2007 Toyota Yaris

    1 Answer

    05 Mazda 6 I need to replace the headlights


    Behind the head lamp you'll see a circular cap with some fins on it. Turn it counter clockwise and then it should come out exposing the back of the bulb. Then you will need to push in and up on an angle to release the metal spring clip that holds the bulb in place. Then you can disconnect the harness to the back of the bulb and then remove the bulb. Do not touch the glass of the bulb when putting in the new one as that will cause the bulb to catastrophically fail

    Oct 28, 2009 | 2005 Mazda 6

    2 Answers

    How do you replace a Drivers side headlight bulb 2006 kia spectra


    Helps to remove the battery, but small ahbds can do it.

    Directly behind the lens is a big round cap ... twist it off. The bulb is held in place with a spring that locks in to a notch in the holder. When handling the new bulb, don't touch the glass. The oil from your skin will cause it to shatter when turned on.

    Oct 15, 2009 | 2006 Kia Spectra

    2 Answers

    How do I replace a 2006 Beetle Headlight bulb?


    Under the hood you on the back side of the headlight assembly there is a a small release lever with a lock. Push the lock in and rotate the release lever. Push the headlight assembly out so you can have access to the wiring plug. Disconnect the wiring plug and completely remove the headlight assembly. Now on the back of the headlight assembly is a spring clip and a small screw. Remove the small philips head screw and release the spring clip.

    Jun 05, 2009 | 2006 Volkswagen New Beetle

    2 Answers

    How do you change the right front headlight bulb on a kia sedona


    Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.

    Dec 25, 2008 | 2003 Kia Sedona

    1 Answer

    Headlight repain


    if this is the kind im thinking of, the spring clip you released holds the bulb into the housing. there should be tabs on the bulb which match the housing. bulb has to be in sraight and can be resecured by folding spring clip over bulb. you should see how it clips on to housing. then can reconnect the wire connector. this can be tricky, be patient and make sure the bulb itself is clean. good luck

    Oct 15, 2008 | 2002 Nissan Altima

    1 Answer

    Replace the headlight bulb


    Remove the plastic access panel by pressing down on the tab at the top of the penel and pulling the top of the panel towards the engine and off. Needle nose pliers may help with the next steps to remove the spring clips. There are 2 bulbs, the top large bulb is the low beam. To remove it, first remove the socket attached to it, then press the top of the metal spring clip towards the front of the car and towards the passenger side (look closely at the clip to see the latch holding it. The clip then swings back towards the engine. Remove the old bulb, install the new bulb, replace the spring clip, re-connect the socket. (Don't touch the bulb, if you do clean it off with a lint free cloth and alcohol). To replace the lower bulb (parking light), remove the socket, then release the lower end of the spring clip, look closely and you'll see the latch holding it. You have to press it towards the front of the car and swing it towards the passenger side. It will swing up and release the bulb. Replace with new bulb, replace spring clip, connect socket. Don't forget to replace the plastic cover panel by inserting the bottom tabs into the sockets and snapping it closed at the top by pressing it towards the front of the car.

    May 15, 2008 | 1998 Mercedes-Benz C-Class

    Not finding what you are looking for?
    2005 Toyota Corolla Logo

    Related Topics:

    20 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    76691 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8531 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...