Question about Cars & Trucks
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: serpentine belt replacement
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine
Posted on Oct 02, 2008
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
Okay, there are a few engines that come in this van, lucky there the same except,they come with or without ac or airpump, so i will give you all of them and you choose the right one.
Posted on Mar 14, 2010
Tips for a great answer:
Sep 08, 2014 | Cars & Trucks
Sep 06, 2011 | 2004 Volkswagen Jetta
May 14, 2011 | 2000 Volkswagen Beetle
Apr 28, 2011 | 1999 Volkswagen Passat
Apr 28, 2011 | 2004 Volkswagen Passat
Dec 05, 2010 | Volkswagen Passat Cars & Trucks
Dec 01, 2010 | 2003 Volkswagen Passat
Sep 30, 2010 | Audi A6 Cars & Trucks
Jul 24, 2008 | 1999 Ford Escort
May 22, 2018 | Toyota Tundra Cars & Trucks
44 people viewed this question
Usually answered in minutes!