Question about 2000 Renault 181

1 Answer

Power windows are not working

I changed the car battery, afterwards the electrical power windows are not working normally. When I try to open the windows it goes down little by a little, what can I do?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

May be you have to check whether there are foreign matter under the glass, sediment is not too much.and you can try to reset them, rise to the top of the glass continues to hold down the switch and hold for about 5 seconds. Then drop in the end also continue to hold the switch for about 5 seconds. General initialization is this.If it still didn't work then go to 4S shop.
source: obd2 tool car diagnostic

Posted on Nov 28, 2013

  • Shafic Mneimne
    Shafic Mneimne Nov 28, 2013

    Great it worked by the reset thing...thanks man I appreciate it...

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset windows on is 350 lexus 2007


(a) Turn the engine switch on (IG).

(b) Halfway open the power window by pressing the power window switch.

(c) Fully pull up the switch until the power window is fully closed and continue to hold the switch for approx. 1 second after the power window is fully closed.

(d) Check that the AUTO UP/DOWN function operates normally.

If the AUTO UP/DOWN function operates normally, reset operations have been completed at this time. If not normal, follow the steps below.

(1) Disconnect the negative battery terminal for 10 seconds.

(2) Connect the battery terminal.

(3) Turn the engine switch on (IG).

(4) Halfway open the power window by pressing the power window switch.

(5) If the AUTO UP/DOWN function operates normally, reset operations have been completed at this time.

If not normal, follow the steps below.

(6) Turn the engine switch on (IG).

(7) Halfway open the power window by pressing the power window switch.

(8) Fully pull up the switch until the power window is fully closed and continue to hold the switch for approx. 12 seconds after the power window is fully closed.

(9) Check that the AUTO UP/DOWN function operates normally.

Feb 05, 2017 | 2007 Lexus IS 350

1 Answer

Unable to start/ 2000 F250 V10


Try first unplugging battery cable for five minutes, this sometimes fix the problem. If it does not replace electric windows relay and electric windows fuse.

Jul 26, 2008 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Hi can't open boot due to roof not working and cannot close the roof at the back catch because u need to turn Allen key bolt to lock it manually which is in the boot can u help please


Hello, One thing is, you never mentioned was when the top stopped working in the first place (i.e. did the car battery die, the nit stopped working, out of the blue, etc.. etc..).
That information could be very helpful in diagnosing the problem.

You may already know this, but someone else reading this info may not, so hopefully it's useful to someone.

The windows need to be working properly and be normalized for the top to function. If you have a specific window that is not working, fix that window first.

Do this to "normalize" the windows:
Press power window switch and roll the window up/down (depending upon where it is when you start) until the window is either completely closed/open and when it reaches the fully opened or closed position keep holding the button for an additional 2-4 seconds. Repeat procedure in both directions up/down for each window. After this point the auto up/down features should be working.

If they won't go up at all after power loss, try this:
If windows won't go up after loss of electrical power. Make certain trunk and all doors are closed. Stand outside by driver's window. Use the key remote to lock car. All windows should go up.

If this doesn't get your top to move, I would hold/press the rollbar button up for 20 to 30 seconds and then down for 20 to 30 seconds. Once the rollbar is put back down, the top should start working again.

If it still doesn't work, I would get some WD-40 or some equivalent penetrating oil and oil where the rear key goes in on the boot/trunk lid and try it again. Sometimes these get stuck and the WD-40 will get them moving again.

Hope this helps and if it doesn't please post back what happens, so I can try to help.

Thanks,
TJ

Apr 08, 2015 | 2000 Mercedes-Benz CLK

1 Answer

Electrical stops when trying to start truck


Have a load test done on the battery as you have a failing cell in the battery.

May 23, 2013 | Toyota Tacoma Cars & Trucks

1 Answer

My 2000 Durango electrical/wiring problems...


The power lock problem is definately the electric lock actuator in the door. Replace it.
The power window problem could be the switch or the motor.
Put a test light on the motor connections. Operate the power window switch up and down. If the light works both directions, then replace the motor. If the light only lights one direction, then replace the switch... and you still might have to replace the motor afterward so do not think that replacing the switch is absolute. They sometimes fail together.

Mar 21, 2010 | 2000 Dodge Durango

1 Answer

Same issue no radio,windows, locks but dash board electric works


Try unhooking the battery, turn key on, leave door open, then connect battery, start engine immediately. The battery saver module thinks it's saving your power!!

Jul 19, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

Lost all electrical power while driving?


Sounds like a poor connection from either the positive or ground from the battery. Check connections at the battery, follow the cables to see if any other connections are loose.

Jun 24, 2009 | 1999 Ford Expedition

1 Answer

I have no power to my 1999 explorer sunroof



Visual Inspection Chart Mechanical Electrical
  • Roof opening panel
  • Opening shield
  • Roof panel frame
  • Opening shield guide feet
  • Fuse junction panel Fuse 26 (10A)
  • Battery junction box Fuse 4 (30A) maxifuse
  • Relays
  • Roof opening panel switch
  • Wiring harness
  • roof opening panel motor

------------------------------------------------------------------------------------------
  • The roof opening panel does not open or close
  • Fuse junction panel Fuse 26 (10A).
  • Battery junction box Fuse 4 (30A).
  • Circuitry.
  • Switch.
  • Roof opening panel motor.

do the power door locks worK?


Mar 21, 2009 | Ford Explorer Sport Cars & Trucks

1 Answer

2003 Jeep Liberty Limited Glass Latch will not move on own.


Hello and welcome the problem is very simple to resolve first make sure you have battery power turn off vehicle open rear gate unlock doors go to rear gate and look at lock unlock again and push the Grey plastic lock trigger mechanism forward towards front glass close gate unlock again make sure lock is still in the position you just set it to and close glass it will the lock. Normally what happens in this situation was power was removed from your jeep and the rear gate was opened with no power running to electric lock so it stays in a set position you cannot lock the glass because there was no power in the electric lock I will lock once you reset it Hope this help. Please Rate Me . For further assistance you can always ask me. wutxtye0rjd9d9ekmodqt1eoxkvn9hr9qjz1l3dabggyud7sdgr36czsrfxqenadhnijx9nfayi+sz1sug0aaaaasuvork5cyii=

Mar 19, 2009 | 2003 Jeep Liberty

2 Answers

Flat battery


No, you dont need to break windows. use the mechanical key that is slotted in the end of the normal electronic gizmo key to open the drivers door. It doesn't work on the boot lid even though it should so you need to energise the electric boot release from unde rthe bonnet as described elsewhere in this solution.

Dec 03, 2008 | 2000 Mercedes-Benz CLK

Not finding what you are looking for?
Cars & Trucks Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

xxxxxx xxx

Level 3 Expert

4869 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...