Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
On the slave cylinder will be a bleed port, remove this fitting (port), remove the fill cap and let the fluid drain into a pan, will not take long if you help by pushing on the clutch pedal a few times.
Posted on Jan 24, 2010
Inorder to tighten it you need to check to see if the side that is not holding if the primary shoe that the handbrake cable pulls on. If not then you may need to adjust the adjuster at the shoe. It may be too far retractor so when the handbrake is engaged, the shoe is not coming out far enough to grab the inside of the drum. There is most likely nothing wrong with the cable. You just need to adjust the shoes. When you pull the wheel off and inspect the shoes, you will see if they are not worn. To use the adjuster, pull see it will be near the retainer spring, the spring will connect from the top and bottom of the shoes to retract them. On the top side, where the upper spring is will be the mechanical adjuster, where you can adjust out the shoes to make them grab accordingly when engaged.
Let us know if you were looking for something more else please accept the suggestion.
Thank You for contacting Fixya.com
Posted on Feb 12, 2010
Tips for a great answer:
Jan 20, 2017 | Mitsubishi Cars & Trucks
Mar 21, 2016 | Mitsubishi Cars & Trucks
Jan 20, 2015 | Mitsubishi Pickup Cars & Trucks
May 27, 2014 | Mitsubishi Pickup Cars & Trucks
Jul 30, 2011 | 2005 Mitsubishi Outlander
May 02, 2010 | 1989 Mitsubishi Starion
Nov 07, 2009 | Mitsubishi Pickup Cars & Trucks
243 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: