Question about Cars & Trucks

Open Question

Toyota tacoma 2rz engine number location

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: 2006 Toyota Tacoma V6 engine oil sensor location

There is not enough flow at the sensor for a second oil filter. The sensor is at a dead end in the oil gallery. I recommend that you persue other options here. If you are concerned about oil contamination, don't be. There is nothing better than the factory filter...Look into adding more oil capacity; Look into an engine oil cooler; there is really no need for a second filter.

Posted on Sep 09, 2008

Ad
  • 273 Answers

SOURCE: Fuel Filter, 2002 Toyota Tacoma

follow your fuel lines back from the injectors/carb it is a cylinder shapped unit should be at the top of the engine near the windscreen

Posted on Jun 06, 2009

  • 1 Answer

SOURCE: how to change the check engine light on a 2000 toyota tacoma

i had the same thing, i had it tested at auto zone and they said it was the obd2. i was told the o2 sensor was not a big deal so i reset the check engine light by holding down the trip meter button while starting her up and it has not been on since.

Posted on Jun 23, 2009

  • 2187 Answers

SOURCE: toyota tacoma 2003 check engine light is

If the car still runs then the problem is not major but may develop into one if unchecked. The sensors in the engine may have detected problems and should be stored in its ECU. If you have a scanner have it connected to the diagnostics it should give you a clue on what to check out.

Posted on Jul 08, 2009

Pointnino
  • 14 Answers

SOURCE: check engine light on 2003 toyota tacoma, O2 sensor?

An O2 sensor code is a tricky one. It could mean SEVERAL different things, and I know how bad it sucks to hear this, but your best bet is to take it in and have a diagnostic ran on it at either a dealer or a good mechanic shop with a computer they can hook up to it. I had an "O2" code come up a while back on another car I used to have, and literally spent weeks and hundreds of dollars trying to fix it, and never did. Finally out of desperation took it in, paid the $90, and they found the problem and fixed it in like 30 minutes. Something I would have never even thought of was causing it (can't remember off the top of my head). After that I stopped wating time and money on check engine lights. One comes on in my car, I take it to have it ran for free at and auto parts store just to make sure it's not a loose gas cap or something, just to get an idea of what I'm looking at, then go and make an appointment to have to hooked up to a diagnostic computer to track down the problem. Good luck, and hope this helps save you some time and money.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vacuum diagram 1997 Toyota Tacoma 2.4 liter engine.


Your engine is 2RZ-FE engine. It and the 3RZ-FE in 1997 had the same vacuum diagram. Here it is....

26272637-nqg1vn14hhabkqyj4ty1oi0o-2-0.gif

Sep 01, 2016 | 1997 Toyota Tacoma

1 Answer

Number 4 cyl. misfire/ 2.4rz engine/98 toyota p.u. how to fix misfire of number 4 cyl.on toyota 98 tacoma p.u./2.4rz engine


check compression, check valve clearance, check injector for properly working, check for vacuum leak around this cylinder.

Feb 10, 2015 | 1998 Toyota Tacoma

1 Answer

Where is the camshaft position sensor on a 1996 toyota tacoma 2.7 located.


Camshaft Position Sensor

1996 Toyota Truck Tacoma 2WD 2.4L EFI DOHC 4cyl

The Camshaft Position Sensor is located: Under hood, passenger side, front engine area, below valve cover, mounted in distributor

Oct 14, 2014 | 1996 Toyota Tacoma

1 Answer

Where is the camshaft position sensor located on a 95.5 tacoma 2RZ-FE engine?


OBD1 -1983 thru 1995

OBD2 - 1996 thru 2013

Your Code Reader should not work without
OBD1 software

So I guess it is really a 1996 obd2 system

Lets educate

NO CODES--tell you what is wrong
NO CODES--tell you what to replace

Codes are used to diagnose the system & there are many,
with the fault or malfunction that does not meet federal
emission standards

You check for codes in a day or so of any problem
You then use the code to direct you to a system
The code is then used along with factory service &
diagnostic manuals to find out how to component test

Your up to the point of needing reference material
& system knowledge,& test equipment

Any Sensors job is to report back to the ecm/pcm
(computer module) usually powertrain module,
that something is out of range, as to how it was
designed & programmed on the assy line

So could the sensor be bad,maybe

Could what is looks at be bad,maybe

You need to go to You Tube & put in your
veh & engine & see what that is

You have VVT variable cam sprocket actuators
that may be worn if the former owner failed to
change the oil or used the wrong oil

So there can be other issues related to that code
& other thing that need work

Spark Plugs
Gas Filter
Check Fuel Pressure
New front O2 Sensors
Air Filter
and on & on

Why unless your the original owner
none of that was ever done

Basic Preventative Maintenance first
Diagnose Code related second

Keep me posted

Oct 03, 2012 | Cars & Trucks

1 Answer

Weak or no spark - won't start.


If the coil cannot produce enought spark to jump at least a one inch gap, replace it. Is the coil internal or external to the distributor?

Aug 05, 2012 | Toyota Tacoma Cars & Trucks

1 Answer

Bank one sensor one is located on what side of a v6 engine 2003 tacoma 2wd prerunner


bank one is always the side of the engine where number 1 cylinder is. Right Front (passenger side)

Sep 08, 2011 | 2003 Toyota Tacoma

1 Answer

Where is the thermostat in a 1995 toyota 4runner?


1995 Toyota Truck 4 Runner 3.0L EFI 6cyl

zjlimited_361.jpg

Fig. 1: On, 3VZ-E engines the thermostat is located in the waterpump (click over pic for zoom)

zjlimited_362.jpg

Fig. 2: Exploded view thermostat and housing on the 1FZ-FE engine


zjlimited_364.jpg

Fig. 3: Exploded view thermostat and housing on the 2RZ-FE and 3RZ-FE engines


zjlimited_363.jpg

Fig. 4: Exploded view thermostat and housing on the 5VZ-FE engine


Hope helps (remember to rate and comment this answer).

Dec 29, 2010 | 1995 Toyota 4Runner

1 Answer

When I replace the spark plug wires on my 2000 4runner how do make sure that the wires are in the correct order


Okay, on the photos I am posting, pick the size of motor that you have....since you didn't post it. When you find the right photo of your motor, the numbers on the engine correspond to the number of the spark plug that goes to the coil...1 to 1, 2 to 2 and so on. This is your firing order and will ensure you have the proper spark plug firing from the correct point:


1a3d6bb.gif
1FZ-FE engine Firing order: 1–5–3–6–2–4Distributor rotation: counterclockwise


86807a1.gif
5VZ-FE engine Firing order: 1–2–3–4–5–6Distributorless ignition system


fe73fe6.gif
2RZ-FE and 3RZ-FE engines Firing order: 1–3–4–2Distributor rotation: clockwise


ecb67ba.gif
2RZ-FE and 3RZ-FE engines Firing orders: 1–3–4–2Distributorless ignition system


09d7f31.gif
2UZ-FE engines Firing order: 1–8–4–3–6–5–7–2Distributorless ignition system

Aug 12, 2010 | Toyota 4Runner Cars & Trucks

1 Answer

What is the transmision fluid capacity for 2005 tayota tacoma truck 2 wheel drive 4 cylinder?


Engine type 2RZ-FE manual trans. API GL-5/75w-90/2.7 qts.
Engine type 2RZ-FE Auto. trans. Dexron III/2.5 qts.
Engine type 3RZ-FE manual trans. API GL-5/75w-90/2.6 qts
Engine type 3RZ-FE Auto. trans. T-IV/2.6 qts
Engine type 5RZ-FE manual trans. Hypoid API GL-5/75w-90/2.7 qts
Engine type 5RZ-FE Auto. Trans. T-IV/1.7 qts

Oct 29, 2009 | Toyota Tacoma Cars & Trucks

1 Answer

Fuel Filter, 2002 Toyota Tacoma


follow your fuel lines back from the injectors/carb it is a cylinder shapped unit should be at the top of the engine near the windscreen

Jun 06, 2009 | 2002 Toyota Tacoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...