Question about Cars & Trucks
Truck runs very well but has this check engine light on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: check engine light on
P0700 - Transmission Control System Malfunction, this is a transmission or PCM issue and needs further diagnosis with other test gear.
The P1684 code simply means that the battery has been disconneted within the last 50 engine starts.
Posted on Sep 09, 2008
SOURCE: 2004 chevy aveo that the
P0128 - the thermostat may be stuck open or has anyone
put a colder thermostat in the car,because once it starts to get cold
it will throw a SES with a colder then stock thermostat. Replace the Thermostat should fix this problem.
PO700 is a code telling you there are codes in the TCM of some late model cars where the Transmission control module has been removed from the PCM the vehicles main computer , and basically it happens when the TCM has a issue within itself or the transmission that sets a code and it sends a request for the PCM to illuminate the SES or CHECK engine light. To get at the TCM codes requires in most cases the most up to date scanner software purchased after the cars model year and as of yet is still a little iffy. Standard OBD11 scanners will generally not be able to see these codes.
P1781 is set during engine start up when the ECM & TCM do not communicate properly during initial power up. It will only illuminate the service light if the condition occurs in 2 consecutive start cycles, but the DTC will be stored in the failure records after the first cycle.
Replace the Thermostat and go to a transmission shop that can read the DTC codes with a scanner and reset the ECM for clear the codes. Most Transmission shop will do that free of charge, if not turn the Ignition key's to the on position and and pull the ECM fuse out for 30 seconds and then place it back in. Turn the ignition keys to the off position for 10 seconds and then start the car, the engine may stall but let it. Just start the engine again, the ECM is just relearning the engine and go for a test drive. This will clear all the DTC history in the ECM like the day it cam off the assembly line. Good luck and keep me posted, be glad to answer ay more question.
Posted on Oct 30, 2009
P174 means Oxygen sensor was slow in switching Single, Right
or Rear HO2S - Fuel control
P171 means Oxygen sensor not switching - system was at adaptive limits - Single, Right or Rear HO2S - Fuel control
for a comprehensive code listing for your car.
Please rate this solution.
Thanks for using Fixya!
Posted on Jan 08, 2010
Tips for a great answer:
Sep 16, 2014 | 2001 Dodge Ram 1500 Truck 2WD
Mar 28, 2011 | Chevrolet Silverado 1500 Cars & Trucks
Jan 14, 2011 | 2003 Chevrolet Silverado 1500
Jan 07, 2011 | 1998 Toyota Corolla
Apr 21, 2010 | 1987 Ford F 150
May 19, 2009 | 1999 Ford Ranger SuperCab
Apr 21, 2009 | Chevrolet TrailBlazer EXT Cars & Trucks
Jan 30, 2009 | 2005 Chevrolet Colorado
11 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: