Question about 1991 Mercury Grand Marquis

1 Answer

Help replacing struts

Would like pics or video if possable

Posted by on

  • Mitch3155 May 14, 2009

    done already, the front struts are easy, just need to remove wheel for access. the rear strts are different, do one side at a time and not only do you need to jack up the frame, you also need to support the rear end on the side yor working on. If you don't it'll (the rear end) fall to the ground when you remove either the top nut or the lower assembly. By the way the top nut is a ***** to remove or replace on both the rear struts.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

To replace the shocks go to public library and see if they have a chilton manual for this car.

Posted on May 09, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


I know, the video isn't an SC but it shows how you don't need that much room at the bottom. I have an 04 sc430 - love it but haven't had to change trunk struts yet. Good luck.

There are a couple of lexus forums that can be very helpful links beneath video...

SC 430 Club Lexus Forums

01 10 Lexus SC430

Jan 05, 2015 | 2002 Lexus SC 430

1 Answer

How do I remove and replace the front struts?

Go to u tube and Type in strut replacement on your bmw and watch a couple of videos and you can rent tools at car quest , auto zone , and Advance auto parts if you need ? I hope this helps out

Aug 11, 2014 | 1992 BMW 3 Series

2 Answers

Help remove replace front struts 1992 BMW 325i

hi, the first thing would be the proper tools. apart from the general hand toold, you require a spring compressor for removing the shock absorber. it would be better if u could see some video of the same before u get ur hands dirty on the job....

Aug 11, 2014 | 1992 BMW 3 Series

1 Answer

Replace front struts on Dodge Stratus

You Tube Video has the movie on yours or
a similar job

You only have 3 nuts on top of strut tower
& 2 bolts on steering knuckle, on any vehicle
made for the last 30 years

Mar 10, 2013 | 2005 Dodge Stratus

1 Answer

Replace cv assembly and also attempt to lift up rear

Best to replace both sides and yes it is the whole axle assembly for each side, as for the struts on the back there are no springs on these struts.

Jun 03, 2010 | 2001 Hyundai XG300

1 Answer

Have broken left front strut(s) on 1998 malibu LS 4-door

dealers will not do warranty repairs from another shop.but if it is a recall then the only way the dealer can refuse the work is if they can prove that the job was completed by another matter who has done the work the recall needs to be completed by the dealer ships. they may or may not give you a problem about this.
i would just keep that part to yourself and let the dealer deal with the recalls part of it.
as far as the struts yes they need to be replaced if one side or the other if not both bounch up and down.
if you can go and push up and down on the corner of the car and get it bouncing up and down progressivly more and more then they are bad .they they resist a lot and its very hard to get it to bounce then they may not need replacement.if they do need to be replaced its important to do it as soon as possable as the front hold most of the weight when in braking and turning conditions and its very easy to loose control of the car with week struts.use kyb replacments.the firmer the better i allways have liked up front.

Jun 12, 2009 | 1998 Chevrolet Malibu

1 Answer

Does anyone have information on how to remove and replace the front struts for a 1991 grand marquis? Pics would be cool

I dont have the exact model in my notes but you can figure your fix with my references.. Ford used the Mcphearson strut assembly on a wish bone suspension alot...
I attached pixes of various kinds never undo the bolt on the center top of your strut just promise to read this through
5b264fc.jpg 840b930.jpg the three bolts hold the whole assembly in place some are on strut tower some you have to go to a arms to find..
the next step is clamp it and remove the center nut stay clear from both ends remove the nut slip off spring put spring over new strut make sure the cut coil seats properly on the bottom of the strut then reinstall the the upper insulator and stud mount Ive torqued some around 45 ft lbs...
be careful good luck Im me if you need help!!!

May 09, 2009 | 1991 Mercury Grand Marquis

Not finding what you are looking for?
1991 Mercury Grand Marquis Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

76848 Answers


Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides