Question about 1991 Mercury Grand Marquis

1 Answer

Does anyone have information on how to remove and replace the front struts for a 1991 grand marquis? Pics would be cool

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 147 Answers

I dont have the exact model in my notes but you can figure your fix with my references.. Ford used the Mcphearson strut assembly on a wish bone suspension alot...
I attached pixes of various kinds never undo the bolt on the center top of your strut just promise to read this through
Does anyone have information on how to remove and - 5b264fc.jpg 840b930.jpg the three bolts hold the whole assembly in place some are on strut tower some Does anyone have information on how to remove and - 17bad2f.jpg go to a arms to find..
17bad2f.jpg
70395b6.jpg
the next step is clamp it and remove the center nut stay clear from both ends remove the nut slip off spring put spring over new strut make sure the cut coil seats properly on the bottom of the strut then reinstall the the upper insulator and stud mount Ive torqued some around 45 ft lbs...
be careful good luck Im me if you need help!!!

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to add spacers to front suspension to 03 grand marquis


Air suspension compressor change 2003 Grand Marquis ...

? 19:37
www.youtube.com/watch?v=X8IlErTkSyY
Mar 18, 2012 - Uploaded by displayfireworks2008 In this video I change an air suspension compressor on my 2003 Mercury Grand Marquis. The old ...

Or add new struts.

Sep 18, 2015 | Cars & Trucks

Tip

How To Install Replace Front Outside Door Handle Mercury Grand Marquis 98-11...


How To Install Replace Front Outside Door Handle Mercury Grand Marquis 98-11 1AAuto.com

on May 18, 2012 | 1998 Mercury Grand Marquis

Tip

How To Install Replace Front Door Panel Mercury Grand Marquis 98-02 1AAuto.com


How To Install Replace Front Door Panel Mercury Grand Marquis 98-02 1AAuto.com

on May 18, 2012 | 1999 Mercury Grand Marquis

1 Answer

Who knows where is the block heater plug in at 1991 Grand Marquis


If your car has one installed already, the plug will be coming out of the grill in the front of the car or hanging down just inside the grill. If you need to purchase and install one, they are for sale at most online automotive retailers and many Auto Zone and O'Reilly's

Dec 16, 2014 | 1991 Mercury Grand Marquis

1 Answer

Where does the top part of shock mount on 1990 mercury grand marquis?


Strut tower in plain site, if you open the hood,
should have 3 nuts to remove for top bearing plate

The rear ones may be in the trunk

Jan 22, 2013 | 1990 Mercury Grand Marquis

1 Answer

Steering wheel hard to turn but works good when going fast


check the power sterering fluid lever ,now if vehicle has macpherson strut front suspension ,iam a europeon mechanic so never seen this car but if has a strut under the bonnet with a big nut on it then fill this cup type washer up with some engine oil as under this is a bearing and if this is dry then steerring will go hard ,and the oil will in time work its way through under the nut lubricating the bearing

Jan 03, 2013 | 1991 Mercury Grand Marquis

1 Answer

How do i replace the front struts on a 1991 pontiac grand prix?


Sorry I lost you. DO NOT REMOVE THE 21MM NUT HOLDING THE STRUT TO THE COIL SPRING WITHOUT THE USE OF A COMPRESSOR. If you`re replacing the entire strut and coil just reverse the procedure. You`ll need an alignment after wards.

Jan 25, 2011 | 1991 Pontiac Grand Prix

1 Answer

Help replacing struts


To replace the shocks go to public library and see if they have a chilton manual for this car.

May 09, 2009 | 1991 Mercury Grand Marquis

1 Answer

1995 Mercury Grand Marquis Suspension


JacDempsey, how about shocks/struts? If they are bad, that could be what u need to cruise the highway nice and smooth the way a Grand Marquis should.

Dec 08, 2008 | 1997 Mercury Grand Marquis

Not finding what you are looking for?
1991 Mercury Grand Marquis Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...