Question about 1995 Volkswagen Jetta
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fuse box diagram
i replaced the stop light switch ($10) to solve my problem. You have to take the panel off (3 screws) then you just unplug the switch right behind the brake pedal and put the panel back on.
Posted on May 25, 2009
Here is the fuse diagram you need see following text description 90-98 Golf-Jetta-Beetle Fuse Box Diagram
Fuse locations for options not shown can be found in the corresponding wiring diagrams.
1 - Headlight, Low Beam, Left (56b) 10
2 - Headlight, Low Beam, Right (56b) 10
3 - License Plate Lights (5￼
4 - Rear Window Wiper And Washer System 15
5 - Windshield Wiper/Washer 15
6 - Fresh Air Blower, A/C (X) 20
7 - Tail Lights, Right (58R) 10
8 - Tail Lights, Left (58L) 10
9 - Rear Window Defogger 20
10 - Fog Lights 15
11 - Headlight, High Beam, Left (56a) 10
12 - Headlight, High Beam, Right (56a) 10
13 - Horn (15) 10
14 - Back-Up Lights 10
15 - Engine Electronics (15) 10
16 - Power Sunroof, Front Map/Reading Light 15
17 - Emergency Flashers (15) 10
18 - Fuel Pump (FP), Heated Oxygen Sensor (HO2S)
Control Module 20
19 - Coolant Fan, A/C Relay (30) 30
20 - Brake Lights (30) 10
21 - Interior Lights, Clock, Luggage Compartment
Light (30) 15
22 - Cigarette Lighter, Radio, Luggage Compartment
(Located above the relays)
- Fuse for ABS hydraulic pump relay 30
- Fuse for ABS main relay 30
- Fuse for A/C 30
- Fuse for power windows 20
- Fuse for cruise control 5
- Fuse for cigarette lighter 15
In the engine compartment above the brake booster:
- Glow plugs 50
Note: The Glow plug fuse should be changed by your authorized Volkswagen dealer only.
Posted on Jul 13, 2009
the air filter is in the engine cover.. the engine cover is also the air filter box.. you have to pull the cover off.. then flip it over and there are 4 screws holding the airfilter.. losen those screws then take the air filter out, replace it and put the screws back on.. then gently put the cover back ontop of the engine. make sure you fit the four holes with the the four studs exactly.
Posted on May 03, 2010
The #1 fuse is in the upper left corner of the fuse panel, actually its the top fuse in the third row down, but row No. 1 and No. 2 do not have any fuses in the upper left corner. There are a total of 23 fuses in the upper most section. Fuse #24 is the first fuse in the lower section of fuses (upper left corner of that section as well.
The block diagram for the fuse panel is also contained in Section 3.2 of your Owner's Manual. The fuses are numbered in each section from top to bottom starting in the upper left. Fuses 1 thru 23 in the top section, fuses 24 thru 44 in the bottom section which consists of three columns.
Posted on Oct 28, 2010
SOURCE: Heater fan has sto pped
First look to see if you have a fuse for the blower motor...then you will want to disconnect power to the fan an jump 12 volts to the fan motor to see if it works...if ok, then there is a speed control resistor that sometimes goes bad located on the heater assembly...It is usually right past the fan so the fan can keep it cool and has 4 or more wires on it. if all else ok then last would be the switch inside car
Posted on Dec 27, 2010
Tips for a great answer:
Sep 10, 2017 | Volkswagen Jetta Cars & Trucks
Aug 09, 2016 | Cars & Trucks
Apr 11, 2012 | Volkswagen Touran Cars & Trucks
Jan 10, 2012 | 1984 Volkswagen Rabbit
Mar 24, 2011 | Volkswagen Beetle Cars & Trucks
Feb 16, 2011 | 2008 Volkswagen Rabbit
Jan 30, 2011 | 1983 Volkswagen Rabbit Pickup
Jan 28, 2011 | 2008 Volkswagen Rabbit
Dec 27, 2010 | 2008 Volkswagen Rabbit
395 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: