Question about 2004 Ford F150

1 Answer

2001 f150 abs started running when I started engine

I unplugged the abs also disconnected battery to reset computer after 10 mins. plugged abs back up still running left it unplugged

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 145 Answers

This problem is better delt with a dealer or up to date shop, there are a multitude of things that could be wrong, wheel speed sensor short, internal abs module problem, wiring for the abs module(pcm to abs communication or vise verse) this is one of those situations where you need the dealership computer communication to see what is going on.
the only thing you can do is check wiring at the moment, the abs will need to be "talked" to find the issue faster.

Posted on May 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I recalibrate my 2001 deville


recalibrate what , PCM/ECM ? engine computer . Disconnect battery cables and touch them together for 10 min.

Jan 23, 2017 | 2001 Cadillac DeVille

1 Answer

Abs brakes ******* 2001 mitsabishi pajero replace two sensor with second hand told do i need to reset something


if the abs light is still on after changing the parts
then yes need to clear the lights with code reader.

some time if the car left with battery disconnected for 30 mins
it some time resets the computer and clear the fault

Sep 18, 2016 | 2001 Mitsubishi Pajero

1 Answer

2001 ford f150 supercab XLT (i think) with short bed, 4.2 L V6, 5 speed manual, styleside (i think). Check engine light on, codes say 02 sensor. How many do I need to buy??? I keep reading different...


bank 1 sensors you have 2 on exhaust bank 2 you have 2 sensors there are 4 02 sensors they range in cost of $75.00 each it will be much easier to replace one at a time. reset your computer each time by disconnecting the positive cable from your battery for 10 mins. each time. you can do this several times, or you can take it to mechanic that has code reader to tell you which is bad. $75.00 minumal cost. you can reset the computer in the truck by disconnecting the positive cable from the battery for 5 to 10 minutes,10 recommened. this will make the light go of, but if you have a bad 02 sensor it will come back on.your 02 sensors are in the exhaust system just behind the motor. hard to get to,need special tool to remove them,but you can purchase at autozone,or advance auto for $20.00 for the tool. the 02 sensors range in price $75.00 each to $85.00 and can go higher. you need to be sure which is bad. or be prepared to pay.hope this helps and thank you for choosingfixya.com. we are here 24/7 to assist thank you!

Jan 12, 2011 | 2001 Ford F150 Styleside SuperCrew

1 Answer

I have a 2002 1500 4X4 suburban it started with oil leak so a macanic took tranny out to put rear main seal new and everything back together now security light flashes and wont start


try one simple thing, reset the computer by disconnecting positive cable from battery for 10 mins.also make sure the crankshaft sensor is plugged back in,will not start without it.he may have missed it when removal of transmission.you may even have to reset the trucks computer,disconnect the positive cable from battery for 10mins.. this will accept any new products,i'm sure they had to unplug the 02 sensors to remove the transmission! this will help, is it getting fuel? if not,try fuel pump fuse,or relay. is it getting fire to plugs? if not, something is not plugged back in right. suggest you check under and on top of motor for a missed plug in. it was running when they replaced rear seal?go from there. hope this helps and thank you for choosing fixya.com chat support is available,phone support also.

Dec 23, 2010 | 2002 Chevrolet Suburban

1 Answer

The motor for the ABS keeps running


need to replace ABS control module they do go bad alot and cause that issue

Feb 15, 2010 | 2001 Chevrolet Blazer

1 Answer

How do i reset the check engine light on my 2003 ford explorer sport trac?


Unplug the battery for about 10 min then plug it back up start the engine. the computer should reset, if the light comes back on then u still have problems.

Jan 04, 2010 | 2003 Ford Explorer Sport Trac

1 Answer

How do i reset the computer on my 1998 gmc suburban 1500 5.7? ive changed plugs cap ect and i knoe i need to reset but cant remember how


Disconnect the battery. Wait 10 min. Reconnect battery, start engine with A/C OFF alow it to idle for10 min ( it will check all the sensors etc) . You should be god to go then.

Nov 12, 2009 | 1999 Chevrolet Suburban

3 Answers

01 jetta with 1.8t, the abs, check engine, check brakes, and another light that i don;t know are all on, any ideas on what causes it?


the abs control module is bad the engine light came on because of cummunication issues with the abs module

Aug 20, 2009 | 2001 Volkswagen Jetta TDI

2 Answers

2001 Dodge Dakota Extended Cab V-6 radio won't function


the radio is in theft lock, you will need your unique code that came with the truck new to unlock it.

Jun 28, 2009 | 2001 Dodge Dakota

Not finding what you are looking for?
2004 Ford F150 Logo

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...