Question about Mercedes-Benz 300-Class

2 Answers

It is a 92 300 e Stalls when engine gets hot

It runs fine until it heats up-then clunks, chugs and stalls out will restart after it cools

Posted by on

  • krrockgirl May 09, 2009

    I just had the trans replaced-what abt bad gas-fuel filter? Runs great until it stalls out

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Here's some solutions:
OVP relay (ssits behind battery)
oxygen sensor
crank shaft adjustment, sensor


sorry for my bad english

Posted on Apr 13, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 957 Answers

Do you know if TCC is disengaging? Sounds like your describing a trani issue. Let us know.

Posted on May 09, 2009

  • larry blais
    larry blais May 11, 2009

    A bad fuel filter will cause your symptoms, but not bad gas. if you change the in-line filter and it doesn't improve. It could be the sock inside the tank.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Malibu stalls while driving, doesn't over heat. But can start smelling gas fumes before it stalls. usually wait about 5 mins then restarts. in higher elevation runs fine but in lower elevatio


It sounds like the catalytic converter could possibly be almost completely plugged up not allowing the exhaust to leave the engine like it should. It just builds up in the cylinder head and when it gets too much in it built up and there's no where to go, it'll stall the engine. By letting it sit for a few minutes, it gives the exhaust time to find a way out and the car will restart.

Mar 27, 2013 | Chevrolet Malibu Cars & Trucks

1 Answer

Transaxle clutch wont release when hot stalls engine


Replace the Torque Converter Solenoid in
the transaxle

What you have is like coming to a stop with
a manual shift & not pushing in the clutch & it stalls
the motor

The converter clutch is staying locked & your
trans is connected to the motor

Feb 14, 2013 | 1995 Buick Century

1 Answer

Car runs perfect then starts missing real bad then stalls


Not unusual for fuel pumps to begin to fail once they are heated up from running. First thing in the morning pump is cool, then as you drive, it heats up and begins to lose pressure. After sitting a 1/2hr-1hr, it may start again and run fine for a short time and start to act up again. Had similar problem and found good fuel pressure when tank and pump cool, but lost pressure once vehicle driven a distance and pump heated up. The hotter the weather, the shorter the distance I could drive. If you can somehow set it up to have fuel pressure checked when it starts to act up, that would certainly help confirm if fuel pressure is the culprit.

Jan 10, 2013 | 1996 Dodge Stratus

1 Answer

Hi i have a renault 21 turbo that runs fine when cool but when it gets hot it stalls and wont start until it cools down what could be wrong


Did you find a solution to this problem? I have a similar problem on my R21 2.0 litre non-turbo.
Thanks Graham

Jul 11, 2012 | 1988 Renault 21

1 Answer

Car stalls in traffic on a hot day. it sputters then stalls and would not start until about 15 mins. the car is a mazda 323 with the Z L engin. thank you


try by replacing thermostat and the radiator pressure cap, this may be just the fix! make sure coolant level is fine. it sounds like it has to cool down for at least 10-15 minutes before restarting. god bless!!

Sep 16, 2010 | 2002 Mazda Protege

1 Answer

92 pickup 22Re engine, runs great when cold but after heating up engine stalls and with no acelleration, and hesitation. After cooling off runs fine


Almost certainly a faulty cam sensor. This sensor suffers over time with the repetitive effect of getting hot and then cold along with the engine. The cam sensor determines when cylinder 1 is at compression TDC and this timing dictates the fuel injection cycle on the engine. If the cam sensor fails to report signals then the ECU fails to inject fuel appropriately and the engine stalls. Many times as the cam sensor gets hot it expands and any discontinuity becomes apparent. As soon as it cools down the cam becomes functional again.

Sep 09, 2010 | 1992 Toyota Pickup

1 Answer

Jeep liberty 2002 3.7when starting cold starts-stalls unitl hot


Check the temperature sensor feeding the ECU and O2 sensor.

Apr 12, 2010 | 2002 Jeep Liberty

1 Answer

Sonata stalls after running good for 10 minutes.


Ignition Control module, and crank position sensors, they get hot and fail and after brief cooling period they work again

www.aceautomotive1.com

if this information was helpful please give me a good rating Thank you,Randy

Aug 17, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...