Question about Chevrolet Cars & Trucks

Open Question

Fog light adjustment on 2010 Malibu LTZ - Chevrolet Cars & Trucks

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
localwonder
  • 6784 Answers

SOURCE: fog lamps won't turn on

OK, you will need to first check the fog light wiring harness. make sure there are no worn wire lines or connections, replace if you see noticeable flaws in the wiring harness. Next, check the clip that fits over the back side of the fog light bulbs. Make sure that the inside copper pins are in good condition and, the the fit is tight. replace the wiring harness if these clips are worn or not fitting properly.

If the above inspections show no apparent wiring harness issues, you will then need to check for bulb failure. make sure that your fog light bulbs are operational. if the bulbs are ok, replace the switch.

Please rata and have a great day:)

Posted on May 20, 2009

Ad
  • 1 Answer

SOURCE: Wiring diagram to install OEM 2010 Toyota Camry fog lghts

here is a link that can help you.
http://www.donmar.com/Tech/FogLight-TCA-303.pdf

Posted on Dec 26, 2010

  • 6 Answers

SOURCE: Fog lights civic 2010

i have no experience to intall it, my boyfriend is car repair technician, so i can tell you some tips about it,
1,fog light mounted bumper in the hood
2,the fog light should be below the headlights
you should notice you local laws, if install the fog light is awful.
more information about car diagnostic, you can view my boyfriends E-shop:greebid.com

Posted on Jun 04, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a Service Airbag Light on my 2010 Chevrolet Malibu when scantool does not communicate with the car.


Chevrolet Airbag Light MOT FAIL How To Fix - YouTube

? 3:49
https://www.youtube.com/watch?v=au-3OSjDXfM
Oct 1, 2013 - Uploaded by OBD Diagnostics
SRS Airbag Fixing - very easy to do the tool is here ... 2004Chevy Silverado service air bag message troubleshoot PART 1 - Duration: 4:09. by ...

Airbag Light Service Resource ' What Your Airbag Light ...

www.airbagsolutions.com/light.aspx
ASA 06/2010 ... The airbag light is an indicator lamp on the dashboard to alert the driver (or passengers) to any ... Some vehicles require a special "scanner" or airbagscan tool to reset the light. ... My car was in an accident, the airbag did NOT deploy, but my airbag light is on. What does that mean and how can I fix it?

Code B0081 - service air bag lite on - Chevy Malibu Forum ...

www.chevymalibuforum.com/forums/showthread.php?t=11116

Sep 15, 2012 - 10 posts - ‎6 authors
2010 Malibu ltz ... 3 days ago car would not start- dead battery- son jump started it and got it going- now the SERVICE AIR BAG lite is on. ... The dealer with his scan toolholds all the cards when it comes to the air bag system. ... so as soon as I fix the tension sensor, the PPS code will clear and then so will ...

service air bag light? - Pontiac G6 Forum



Dec 16, 2015 | 2010 Chevrolet Malibu

1 Answer

2010 Malibu liz, battery location


Some how your question was directed to Computer Speakers. I suggest you input the question again under the correct category.

Feb 10, 2014 | 2010 Chevrolet Chevrolet Malibu LTZ

2 Answers

2010 Malibu LTZ rough idle


I would check the throttle body, where the fuel mixes with the air also clean all pipes/connections etc after that you should know where to go next, but give the "plate" inside where fuel and air mixes, carb

Jun 11, 2013 | Chevrolet Malibu Cars & Trucks

2 Answers

Is there any recalls on the 2010 chevrolet malibu ltz


There is (1) recall that effects all 2004 - 2010 Chevrolet Malibu's.

Recall #13036: "Brake Lamp Malfunction". The dealer will repair the body control module and brake pedal position sensor connector and harness.

The following parts were installed by the dealer for my 2010 Malibu:
11509086 - SL-N-Strap (08965-BOPCKT)
13596990 - SL-N-Clip (02559-C)
13596991 - SL-N-Retainer (02559-C)
15188763 - SL-N-Retainer (04634-CT)

Your local dealer will have this information available. Make sure to have your VIN number before calling.

May 13, 2012 | Chevrolet Cavalier Cars & Trucks

1 Answer

How do you replace the fog light bulb on 2008 avalanche


    • 1 Open the hood and reach down into the engine bay for the fog light assembly. If you cannot reach the fog light assembly from the top you may need to get underneath the truck to reach it. Remove the electrical plug running to the fog light ballast.
    • 2 Remove the bulb. Unlock the fog light bulb by turning it counterclockwise and pulling it straight out of the assembly.
    • 3 Slide a new bulb into the fog light assembly. The part number you will need for the new bulb will be located on the ballast or base of the old bulb.
    • 4 Turn the bulb clockwise to lock it into the fog light housing.
    • 5 Reconnect the electrical connector to the bulb ballast.

Jan 23, 2011 | 2007 Chevrolet Avalanche LTZ

1 Answer

I have a 2007 avalanche ltz fog lights wont always come on. checked fuses and they are good, however i did pull out the big black fuse and put it back in and fog light began to work again. is it the fuse?...


If it had four or five prongs coming out of the bottom it is the relay. There should be a part number on it. If there is you can have any parts store cross that number. If not bring it in and they should be able to match it up.

Dec 01, 2010 | 2007 Chevrolet Avalanche LTZ

1 Answer

Fog lamps won't turn on


OK, you will need to first check the fog light wiring harness. make sure there are no worn wire lines or connections, replace if you see noticeable flaws in the wiring harness. Next, check the clip that fits over the back side of the fog light bulbs. Make sure that the inside copper pins are in good condition and, the the fit is tight. replace the wiring harness if these clips are worn or not fitting properly.

If the above inspections show no apparent wiring harness issues, you will then need to check for bulb failure. make sure that your fog light bulbs are operational. if the bulbs are ok, replace the switch.

Please rata and have a great day:)

May 20, 2009 | 2008 Chevrolet Malibu

1 Answer

Problem with 1998 chevy malibu fog lights


hi disconnect your fog light switch if this doesn,t knock them off you need to find the fog lights relay and replace it as the fog light circuit is shorted best of luck yates210456

Oct 07, 2008 | 1998 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...