Question about 2006 Ford Fusion

Open Question

Where is vent tube located on gas tank for ford fusion

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 370 Answers

SOURCE: a lot of fumes come from the vent tube located

First off are you getting a MIL/ check engine light??
i beleave this van is new enough it should have an EVAP system on it there is a close valve soliniod that should allow those fumes to leak out through the EVAP canister not build up pressure in the tank and leak out the top tube when you open the cap...
I hope this helps if im readin into this wrong please clarify for me and ill repost more info for you. good luck

Posted on Aug 23, 2009

Testimonial: "Thanks. I think you 're right. I will check the solenoid and tell you later."

Ad
hi99ins
  • 123 Answers

SOURCE: fuel pump location 1988 ford econoline

Theres 2 pumps one in the tank, lift pump, and one in the chassis rail under the driver side. The one in the tank is cheap, the one in the rail is not. The one in the tank only produces low pressure to prime the main pump and if it is broken, may not cause that much of an issue except when starting. the one in the rail is a no-start if it fails. The idea is that the rail pump can supply high pressure for the injectors, so a fuel pressure test at the injector rail will determine which pump is playing up. Hope that helps Tim

Posted on May 26, 2010

emissionwiz
  • 76846 Answers

SOURCE: 2006 ford fusion gas valve, where is it located?

No such part as a gas valve.

Posted on Sep 04, 2012

  • 3 Answers

SOURCE: how to drain ford fusion fuel tank

DO NOT PUT PETROL IN A MODERN DIESEL ENGINE. Diesel is a lubricate fuel and protects the internal fine tolerance working parts of the diesel fuel system. Petrol is a cleaning agent and removes all the lubricate from the internal fine tolerance working parts of the diesel fuel system this can cause unrepairable damage to the engine. Drain the fuel tank (it may be easier to remove the fuel tank to clean it out properly), all fuel lines and the fuel filter, refill tank and fuel lines and filter with diesel bleed the fuel system including the fuel injectors (I always bleed it back into a drain pipe into a bottle at the return pipe connection at the fuel tank to ensure that all the petrol is out of the fuel system before starting the engine) once started put some good quality diesel fuel cleaner in the fuel tank to make sure the injector tips are cleaned out. Note change the fuel filter again after another 2000 miles of running

Posted on Dec 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas tank vent


filler neck vent hose to tank/vent line from tank to carbon canister under hood that then hoses to fuel throttle body.

Mar 18, 2014 | 2010 Ford F-250 Super Duty

1 Answer

Gas smell in. The car


Do you top off the tank very often after the fill clicks off at the pump?? If so don't do that you have overloaded the carbon canister which stores fuel vapors and it is venting out the fumes.

Jul 27, 2012 | 2006 Ford Fusion

2 Answers

2006 Ford Fusion 2.3L I4 Engine Check engine light ODBC code is P0455. I have already replaced the gas cap. The computer codes were cleared by disconnecting the battery. The check engine light and same...


If you have already replaced the gas cap then you need to start looking for splits in your evap lines, and the evap canister for your vehicle. This procedure is easier done at a shop then by the DYI due to how many different lines that you have, and you may have a small slice in a line that only opens up under certain conditions. The p0455 is a very difficult code to diagnosis

Jun 06, 2011 | 2006 Ford Fusion

2 Answers

I have a 2006 F250 which I have lots of aggravating problems with trying to fuel up. No matter which gas stations or method of inserting the nozzle into the fill tube I use, I am frustrated by the time it...


where the filler neck goes to tank didnt it have seperate tube which is vent or with filler neck hose off at tank look inside tube for another hose it is vent hose take fuel cap off and blow air from tank end towards the filler cap area we have had two ford vehicles lately in our shop when we blow shop air backwards thru hose several little round pieces of foil off of fuel injector cleaner bottles somehow they had become lodged in vent line and one customer had vehicle towed from gas station because they were on empty and would accept no gas you may want to check this doesn,t have to be cleaner bottle tops could be any sort of debris but ours came flying out of fuel cap when when blew air thru you could pump gas with handle all the way down she was happy

Mar 24, 2010 | 2006 Ford F-250 Super Duty

1 Answer

Will not take fuel at the gas station. Keeps clicking off like the tank is full. its like the hose going dowm to the fuel tank is partially blocked.


Vent tube plugged. You should find it running down to the tank alond side the filler tube. Might be kinked or plugged. Fords quite often are difficult to fill with gas. I have an 05 Mustang that i have to flip the handle of the gas pump completely upside down in order to get any gas in it, or it does the same thing as yours.

Nov 05, 2009 | 2005 Ford Explorer

2 Answers

When I fill-up my ford contour the gas pump keeps clicking off. can only put in a little gas at a time


Check the vent tube which is alongside the gas fill tube. It's either kinked, bent, pinched, or some how blocked, not allowing easy flow of gas into the tank. Once the tube is open, you will not have trouble. You don't give the year, it's possible it needs to be replaced (comes as a unit with the fill tube) if rusting badly.

Aug 22, 2009 | 2004 Audi A4

2 Answers

When I pump gas, it will spill out of the tank when its not full


there is a vent pipe/tube that runs along the fill pipe, this vent allows air out of the tank when u fill it, it has to be obstructed, replace it.

Mar 17, 2009 | 2003 Ford Focus

1 Answer

Gas tank wont take gas


The fuel tank vent tube is obstruted, this tube runs down inside the filler tube, you will need to pull the filler pipe off and repair or replace it.

Jul 25, 2008 | Ford Ranger Cars & Trucks

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...