Question about 2008 Ford Taurus SEL
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: CD Player won't work
Try pressing the eject and load buttons at the same time, with the car ignition in the ON position. You might have to hold both buttons for 15 to 30 seconds for this to work.
Posted on Nov 10, 2008
SOURCE: 6 disk cd player error
This is a part failure in the mechanism that loads and ejects the disk, there are no repair manuals avail to either the tech or the consumer, the only place that the factory gives this info and parts to are factory authorized repair stations, bottom line you must pull the deck and contact a Ford dealer in your area for location of the nearest factory repair station. I was dealer tech for 20 years and that is how it is done.
Posted on Nov 21, 2008
The only way to fix your problem is to have a radio repair shop take it apart. You cannot fix this on your own. Remove the radio or get a quote from a repair shop first. If you cannot find a repair shop , talk to the parts guys at you local ford dealer about sending it out for repair.
Posted on Feb 13, 2009
You have a mechanism failure on the changer which is preventing the mode of the function to return to the normal state. Hence the processor is giving out the error signal. First of all open the changer and ceck for mechanism damage. if not slowl try to rotate the load motor to return to the normal state and eject. now check the connections to the motor, the flexible line wiring may be defective. use a loop wire or test the continuity from the motor. if there is a rest switch use it for resetting, if not disconnect poweer nd power again. Some cd'smay be warped or damaged and causing to block the sensitive transport. remove of these cd's and testt again. if there is no motr drive at all then the IC of the motor drive has failed. clean and set back. hope this helps you. Good day
Posted on Jul 12, 2010
Tips for a great answer:
Dec 25, 2015 | Nissan Cars & Trucks
Jun 23, 2015 | 2008 Mini Cooper S
Feb 20, 2014 | Mercedes-Benz Cars & Trucks
Feb 15, 2013 | 2008 Dodge Nitro
Jan 03, 2013 | 2006 Lincoln Zephyr
Nov 01, 2012 | Volkswagen Cars & Trucks
Jul 25, 2011 | 2008 Hyundai Elantra
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: