Question about Honda Civic

Open Question

I replace timing belt on a 1997 Honda civic with a1.6 L engine had a crankshaft speed fluctuation sensor on it wont start how do I get it back in time

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mas66
  • 104 Answers

SOURCE: 95 honda civic timing belt replacement process

If you have never changed a cambelt (timing belt) then it is not recommended that you attempt it. It is a job for a mechanic, as getting the cam timing wrong on reassembly is easy to do and can have disastrous consequences. It is easy enough once you know how, and if you are reasonably mechanically able, I'd suggest getting a repair manual for your vehicle that has a step by step procedure for timing belt replacement. Companies like Haynes produce very good repair manuals.

Posted on Oct 25, 2008

ewashmidas
  • 362 Answers

SOURCE: I'm replacing a timing belt

The only other thing could the the timing belt tensioner if there is any doubt. Here's the timing marks.
324fdd7.png
8b739ff.png

Posted on Jan 24, 2009

  • 1071 Answers

SOURCE: How do I replace the timing belt and the crankshaft sensor ?

if you have never done one take it to a shop because if you have the timing off a little you take a chance of bending valves then you would need a new head

Posted on Jul 23, 2009

  • 491 Answers

SOURCE: Replace crankshaft position sensor

Remove the left front wheel....(drivers side). Remove all accessory belts. Remove the crankshaft shaft pulley.......remove the plastic lower timing belt cover.....and there it is! It is mounted with one bolt.
The wiring runs down the right side of the timing cover while looking at it from the drivers side of the car.

Posted on Aug 17, 2009

Testimonial: "I ended up having my mechanic do the work. He did say he had to move all those parts to get to the sensor. "

buffalonyman
  • 1865 Answers

SOURCE: 1993 honda civic timing belt replacement d15b

Buy a Haynes manual (about $20) from an autostore; you're going to need it for this task

Posted on Nov 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a p1399?


Tech notes
Adjusting the valves will usually fix this problem.
When is the code detected?
The control module monitors the crankshaft speed and has detected a misfire condition
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation
P1399 Honda Description
When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, the Engine Control Module (ECM) can determine that a misfire is occurring.
- Valve clearance out of range

Jul 16, 2015 | 2004 Honda Odyssey

2 Answers

2000 Honda 1.6 showing P1336 code, what is the location of this code?


Only two things I have seen cause this code, the first is the crank sensor harness not routed correctly after a timing belt job or alt. replacement and the alt. belt rubs it or the timing belt has jumped a tooth or is not lined up correctly.

May 08, 2014 | 2000 Honda Civic

2 Answers

97 honda civic wont start,got fuel,spark,compresion,new timing belt,its in time,new spark plugs,new distributor cap,new crankshaft position scensor


I would suggest to get a propane torch and turn on with out lighting it (flame less) Place in intake port to manifold crank and see if starts. this will let you know if injectors are cycling or not. This engine has Three sensors that keep the engine running crank,TDC,cam. The TDC and CAM are in the distributor and crank is behind timing belt cover.

Nov 09, 2013 | 1997 Honda Civic

1 Answer

1995 honda civic Ex 5speed manual trans


The timing belt is wrapped around the crankshaft and camshaft sprockets in the engine assembly.

Apr 06, 2013 | 1995 Honda Civic

1 Answer

1997 honda civic, it shut down while running (50-55mph), tried to turn it on and sounds like it trying to start but wont go...


i hate to say this but you may have broken your timing belt, and thats real bad on a honda. just loosen the valve cover bolts and remove the plastic top cover over the belt and see if the belt moves then cranking the engine, i hope for your sake this isn't the case because hondas are equipped with an interference engine which means when the timing belt goes the valves hit the pistons

Nov 25, 2009 | 1997 Honda Civic

2 Answers

95 civic will not start mechanic say timing belt but can see valve moving when cranking


the timing belt and the crankshaft gear and the camshaft gear all have marks that line up to one another

May 25, 2009 | 1995 Honda Civic

3 Answers

Overheating


did u bleed the motor and lett the air out of it if not it wont fill up even thow you think it is full it is not if you did not bleed the air out

Mar 22, 2009 | 1997 Honda Civic

1 Answer

95 civic wont start


An engine needs 3 things to run: Fuel, compression, ignition.

Maybe the timing belt went out. Take off the dist cap and see if the rotor turns as you crank the engine.

Next run a compression test on all the cylinders.

Dec 09, 2008 | 1997 Honda Civic

2 Answers

Cam position sensor fault indicated on computer diagnostics .Timing chain jumped will this have caused valve damage.Vehicle is a civic type r on 2002


With Vtech motors, if the timing belt jumps to much yes you will get valve/piston damage. This type of damage is usually very noticable (knocking, loud head noise, no start) Best thing to do if no damage is noticed have the belt adjusted back into timing. jumping one rib maybe 2 might not have enough to cause damage my prelude jumped and didn't have a problem

Nov 24, 2008 | Honda Civic Cars & Trucks

3 Answers

Car stalling, kicking back on acceleration at 25 - 35 miles speed


I WOULD TAKE IT BACK TO MAKE SURE THE TIMING IS CORRECT I KNOW THAT IF IT IS OFF 1 TOOTH IT WOULD MAKE IT DO THIS PROBLEM

Nov 17, 2008 | 1996 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...