Question about 2007 Chevrolet Tahoe

Open Question

Rain sensing windshield wiper

Calibrate rain sensor

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: windshield wipers stopped working

wiper transmission likely came a part in dash rove all covers evaluate what came a part either reconnect or replace item

Posted on Apr 05, 2009

Ad
  • 1 Answer

SOURCE: Rain Sense Wiper Problem- 2009 Tahoe

I had to unplug mine at the sensor which up by the rear view mirror. I pulled the black plastic cap open unplugged it there, now it works like a normal wiper with control of the delay cycle. Hope this helps. Al

Posted on Jun 16, 2009

  • 3 Answers

SOURCE: S-10 Wipers Don't Work in the rain

My 98 suburban did the same thing (has intermittent wipers I assume) I had to replace the wiper motor. AutoZone had a rebuilt one for $50. ($279 at dealer for a new one)

Posted on Jul 28, 2009

BeninVa
  • 389 Answers

SOURCE: Driver's side windshield wiper stopped working.

Hello, I would say that is exactly what has happened. If you can move the wipers with no resistance it's likely one of the bolts has come loose. Both wiper arms are linked to one wiper motor.

Posted on Mar 07, 2010

  • 447 Answers

SOURCE: My wipers work when they want to don't always work

I don't believe there is a recall but I've replaced a lot of the wiper control modules [glorified circuit board] on top of the wiper motor for similar problems. Something in the circuit board goes bad and causes the wipers to malfunction randomly. There are other things that can cause wipers not to work but I'd look there first

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rain sensor chrysler 300c wont work


Check wiring to the sensor on the windshield. Also see if sensor is coming loose from the glass. The repair for this is new windshield with sensor.

Mar 01, 2012 | 2008 Chrysler 300C 5.7

1 Answer

2004 Jeep rain sensing wipers continue to run regardless of setting or amount of rain


a couple of thoughts:
Has your windshield just been replaced?
The sensor is up by the rear view mirror, is it plugged in all the way?
Do you have the right size wiper blades on your vehicle? (too short of a blade misses the rain sensor and does not wipe it clean)
How good are your blades? ( as above, to turn off the rain sensor the blade needs to wipe it clean)
The rain sensor works by projecting multiple inferred beams to the inside of the windshield, like a prism, they reflect back to collectors. when there is a water droplet on the outside of the windshield it changes a beams trajectory and it misses the collector thust turning on the wipers.
(yes, this all happens in that little sensor up by the rear view mirror.)
check to make sure the wiper switch is in the right position.
also....I've seen rain sensors not work properly when the hood or doors are open.
hope this helps

Feb 01, 2010 | 2004 Jeep Grand Cherokee

1 Answer

My automatice wiper won't turn off on thier own


It has auto wiper control. Yank your wiper stick 1 notch down. The windshield should be free of rain droplets or else it would think it is still raining and operate it in auto mode. In auto mode it will shut off when it doesn't sense rain droplets on the windshield or removing the key from the ignition. Once it is off, it can only operate in auto mode by moving the lever 1 notch up while raining. Yours must be in the 1st speed manual selected position of the lever. Every time the ignition is switched on the wiper operates regardless until key is removed from the switch.

Nov 23, 2009 | 2000 Volkswagen Golf

1 Answer

Repair the rain sensing equipment for 2005 Jeep GC


If this was a motor issue then it would not work at all...so one thing to do is to check the sensor reading using a meter and see if you get a resistance reading from it..Now sensors are not easy or practically impossible to fix so you may need to replace only`the sensors for this.

Nov 05, 2009 | 2005 Jeep Grand Cherokee

2 Answers

Mercedes c230 windshield wiper starts on its own


Car has rain sensing windshield.Most likely you have the wiper on/off level in the intermittent position,which turns on the sensor. When the sensor detects moisture or even dust sometimes. It turns on wipers. Just make sure the wipers are off and not in the intermittent position.

Jun 17, 2009 | Mercedes-Benz C230 Cars & Trucks

1 Answer

Rain Sense Wiper Problem- 2009 Tahoe


I had to unplug mine at the sensor which up by the rear view mirror. I pulled the black plastic cap open unplugged it there, now it works like a normal wiper with control of the delay cycle. Hope this helps. Al

Mar 17, 2009 | 2009 Chevrolet Tahoe

Not finding what you are looking for?
2007 Chevrolet Tahoe Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...