Question about 2004 Ford Explorer Sport Trac

Open Question

4.0 liter ford intake torque spec - 2004 Ford Explorer Sport Trac

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: torque specs 7.5 inch rear axle 96 ford ranger

Differential bearing caps 70-85 ft lb
Ring gear bolts 70-85 ft lb
Pinion bearing preload if using original bearings 8-14 lb-in, if installing new bearings 16-28 lb-in

Posted on Jan 30, 2009

chuck943
  • 783 Answers

SOURCE: torque specs foe 4.9 ford f150 flywheel

75-85 ft lbs

Posted on Mar 04, 2009

michigan man
  • 3533 Answers

SOURCE: spark plug gap spec. for 1997 ford ranger/4.0 liter

for the most part it is under the hood of your car where the sticker say engine size try this website to see if they have you car listed its www.autozone.com if not call your local part store and tell them its a 4.0 liter and you need the gap on the spark plugs

Posted on Apr 20, 2009

chuck943
  • 783 Answers

SOURCE: Ford 460 Intake Manifold Torque spec

22 to 35 ft lbs

Posted on May 22, 2009

c17hydro
  • 2984 Answers

SOURCE: torque spec 96 ford contour 2.0 liter dohc head bolts

Please don't forget to rate!

1st step 15-22 ft.lbs.
2nd step 30-37 ft. lbs.
3rd step Tighten the bolts an additional 90-120 degrees

Do you need the tightening sequence?

Posted on Oct 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 ford windstar intake manifold torque specs


Intake torque specs ' FordForumsOnline.com

www.fordforumsonline.com > Ford Tech Forums > Engine & Drivetrain

May 7, 2010 - 2 posts - ‎2 authors
ISO torque specs for the intake & plenum for a 98 Windstar...3.8 with the ... Our community is here to help you with any questions you have related to your Ford. ... Lower Intake Manifold to Cylinder Head Bolt 8-12 - (71-106).

Torque Specifications - AutoZone

www.autozone.com/.../Ford-Windstar.../Specifications/Torque-...

AutoZoneAutoZone Repair Guide for your 2004 Ford Truck Ranger 2WD 2.3L MFI DOHC 4cyl Engine Mechanical Specifications Torque Specifications. ... Ford Windstar 1999-2003 ... Bolts, Main Bearing Bolts, Rod Brearing Bolts, Crankshaft Damper Bolts, Flywheel Bolts, Manifold. Intake, Exhaust ... Vehicle: 2008 Ford F150, 98 Civic.

Dec 21, 2015 | 1998 Ford Windstar

1 Answer

What are the intake manifold torque specs on a 2005 Pontiac grand Prix gtp 3.4 liter with super charger?


If it were mine, I'd want to be very sure what it was and so I always use a Repair Manual I can see and read, but that me.

Mar 13, 2015 | 2005 Pontiac Grand Prix GTP

1 Answer

2008 dodge charger with a 2.7 liter engine head boly specs


  1. 2.7 litre intake bolt torque spec in a 2008 dodge charger ...

    www.fixya.com/cars/t18664111-2_7_litre_intake_bolt_torque_spec_in Jun 27, 2013 - Head Bolts Step one 37 ft lbs then tignten 120 degrees more. Rocker arms. Step one 11 ft lbs then tighten 90 degresss more. Upper intake 89 inch ...

Feb 28, 2015 | 2008 Dodge Charger

2 Answers

I would like to know the torque specs to cylinder head bolts.


WELL MY CRYSTAL BALL BLEW A FUSE AND MY GENIE RAN AWAY WITH BRITANY SPEARS CAN WE POSSIBLY TELL US ALL WHAT KIND OF CAR AND WHAT MOTOR IT'S NEEDED FOR NONE OF US CAN SEE IT SO WE ALL CAN NOT HELP YOU UNTIL YOU DO THIS PETE POST BACK WITH SPECIFIC INFO O.K.PETE

Feb 20, 2015 | Cars & Trucks

1 Answer

Intake manifold torque specs.


It is criss cross from front to back around 15 foot pounds so snugging them with a ratchet should do the trick

May 17, 2014 | 2008 Mercedes-Benz Mercedes Benz C Class

1 Answer

What are the torque specifications for the intake manifold on a 2003 Ford F150 4.2 liter engine?


These torque specs are from the Haynes manual (Ford pick-ups 97' - 03') This is a 2- step proccess. step-1 44-in-lbs step-2 89-in-lbs. There are 14 bolts that hold the manifold in place, tightening sequence goes as follows: start from the center( WORK IN A "X" PATTERN)

Oct 02, 2010 | 2003 Ford F150 Regular Cab

1 Answer

Intake torque specs


Upper intake

Stage 1: Tighten to 20 Nm (14 lb-ft).
Stage 2: Tighten to 25 Nm (18 lb-ft).


Lower intake

Stage 1: Tighten to 15 Nm (11 lb-ft).
Stage 2: Tighten to 32 Nm (24 lb-ft).


Rocker Arms

Stage 1: Tighten to 10 Nm (89 lb-in).
Stage 2: Tighten to 32 Nm (24 lb-ft).

May 17, 2009 | 2000 Ford Windstar

2 Answers

I need to get the torque specs on the head for a 1997 ford f-150 4.2L


go to auto zone web site, and enter info about your truck, click on repair guide, and it will work you through to your engine, find repair or replace heads, scroll down and you should find the torque specs.

Dec 03, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...