Question about 2002 Ford Focus
Remove the front seats
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.
Posted on Jul 28, 2008
Just took one out last night. It also was stuck. Had to use small pry bar to get off the front mount. Sprayed the mount with PB blast to help. You do have to use some force, becareful not to break any electrical connections. Once the front mount was free, I had to pry up on it using a small hatchet. Only thing that would fit and actually be able to pry. The alternator became twisted from prying only on one side, so I used a block of wood and tapped it back straight. It finally released from the mounts and came loose. Then the fun begins in trying to actually get it out. Had to disconnect everything around it, took two people and alot of twisting and turning. Not looking forward to getting it back in. Removal took over 2 hours.
Posted on Aug 21, 2008
To replace the clutch master, you must remove the under hood fuse box and air filter housing assm, then remove the hydraulic line that goes into the inlet port of the clutch master, then inside the car, remove the hush panel/knee bolster panel from under the steering column, and loosen the boilts that retain the brake pedal to the firewall, then remove the two 10mm bolts that secure the clutch master to the brake pedal assm. Reverse procedure ti install, then fill the brake master cylinder with clean fluid, loosen the bleeder screw at the top of the trans, and bleed the clutch as you would the regular brake system, but never pump the pedal, tighten screw, with foot off of clutch pedal open screw and press pedal to floor, then tighten screw before you release pedal, then release pedal loosen screw, etc. until no more air comes out, it may take quite a few times to fully bleed the system.
Posted on Feb 07, 2009
The armrests have covers that can be removed. Locate the zipper on the arm rest. Once you unzip it pull it toward the back of the arm rest and this will expose the one bolt that hold the armrest on. You will need a large torx and rachet to get it off. Once you take out that bolt the armrest will come right off.
Posted on Apr 07, 2010
Tips for a great answer:
Aug 29, 2012 | 2003 Ford Focus
Mar 13, 2010 | 2003 Ford Focus
Nov 15, 2009 | 2003 Ford Focus
Sep 24, 2009 | 2004 Ford Focus
Jul 09, 2009 | 2002 Ford SVT Focus
Jun 18, 2009 | 2003 Ford Focus
Mar 17, 2009 | 2003 Ford Focus
Oct 25, 2008 | 2003 Ford Focus
Oct 23, 2008 | Ford Focus Cars & Trucks
Sep 10, 2016 | 2002 Ford Focus
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: