Question about 2000 Pontiac Grand Prix

2 Answers

2000 Grand Prix Brake light issue

The two rear brake lights don't work. The tail lights and the 3rd brake lights works. So, the ground wire must still be connected and it can't be the brake light switch, so.....I am lost for ideas. 
Any help would be great! 
Thanks.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Pontiac Master
  • 3,433 Answers

Outside possibility both bulbs are defective. occurance experienced once and only once. but cannot ignore or assume possibility or probability

Posted on May 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 75,774 Answers

YES THE PROBLEM ON THESE IS THE MULIFUNCTION SWITCH, ALSO KNOWN AS THE TURN SIGNAL SWITCH. THE SYMPTOM FOR THIS SWITCH BEING BAD IS THE ONE U HAVE ACCORDING TO A SERVICE BULLETIN. PART # ACDELCO D6280A 2000 Grand Prix Brake light issue - d974e9a.jpg

Posted on May 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver Side Rear Tail lights: running, brake & turn signal do not work. The ground connection is functionind at the lights sockets. The resistance .3 ohms black wire at each light socket to chassis...


I suggtes test the "brake light switch", generally, is located in backside of break pedal. With the flasher unit, just replace it.

Keep us updated.

Feb 14, 2011 | 2004 Pontiac Grand Prix

1 Answer

Sent an email earlier before I finished the situation. 2000 Pontiac Grand Prix GT. Brake lights will not work. I have replaced all bulbs, running lights work, third brake light in window works, turn...


has to be somwhere in the wiring for the tail lamp brk light. if the high mount works the switch is good. did you put the correct bulbs in? they may share a common ground independant of the other lights.

Nov 19, 2010 | 2000 Pontiac Grand Prix

1 Answer

Need help with 2000 grand prix stop lights. power good at the fuse, power wire good from fuse box to stop light, brake pedal switch works and still no stop lights..


Look for a broken ground wire at the back of the car!

You ran the power all the way down to the bulb which means there is only one thing left. The ground lead!

You can try grounding the brake light socket with a test light or a lead from your multitester to check it.

Nov 29, 2009 | 2000 Pontiac Grand Prix

1 Answer

Brake lights don't work, one in back window works but ones on tail lights don't checked bulbs and fuses and they are okay


I would check the wiring to the 2 side lights, and make sure they are grounded or none has been cut or corroded. You have good power going to the rear if the 3rd brake lite is working fine so I would trace the wire from the 3rd brake light to where it splits and goes to the 2 rear brake lights...

Nov 05, 2009 | 2001 Chevrolet Malibu

2 Answers

2000 Grandpa Prix Brake light issue


yes they are the same bulbs,sounds like the brake light switch,located where the brake pedal is is not working

May 07, 2009 | 2000 Pontiac Grand Prix

1 Answer

Rear tail lights won't go on in 1994 pontiac grand prix


rec replace brake switch high mount brake light would still work due to seprate cicuit.if no pulse coming out of white wire then replace if pulse check wiring to repair or run new wire. to brake lights.

Jan 02, 2009 | 1994 Pontiac Grand Prix

1 Answer

Brake lights


No it is not controlled by the BCM the issue is most likely caused by the turn signal switch itself, a bad internal connection, very common on GM cars and trucks.

Aug 22, 2008 | 2000 Pontiac Grand Prix

Not finding what you are looking for?
2000 Pontiac Grand Prix Logo

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...