Question about 1992 Eagle Talon

Open Question

U have a 1994 oldsmobile cutlass ciera s and i need to know how to remove the front panel of my radio how do i remove it

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I I need to know what size is the fuse for a Cutlass Ciera Oldsmobile 1994 ignition fuse

Your question is inconsistent with the fuse panel you are showing in the picture. The only place you will find the ignition fuses (there are two of them) is on the driver side, under the hood electrical center. They are 40 amp fuses in position/location numbers 3 and 4.

Feb 13, 2017 | 1994 Oldsmobile Cutlass Ciera

1 Answer

My 1994 Oldsmobile cutlass ciera ECM fuse keep blowing, the computer at O'Reilly said that it is the auxiliary wiring, What does that means???

i would expect it mean's the wiring harness to the ECU , most likely has a break somewhere and is earthing out , you will need a auto electrician to trace the fault , electrical problems are a nightmare , look on a Oldsmobile internet forum some one may know where to start, or recommend a repairer

Nov 21, 2014 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Do you know where the 2 bolts are on a starter for a 94 olds cutlass ciera s?


Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How do I replace the headlight switch?

Check this procedure for Ciera and Cruiser...
  1. Disconnect the negative battery cable.
  2. Remove the left side instrument panel trim pad.
  3. Unbolt the switch from the instrument panel.
  4. Pull the switch rearward and remove it.
To install:
  1. Install the switch and engage the electrical connectors.
  2. Install the bolts attaching the switch to the instrument panel.
  3. Install the left side instrument panel trim pad.
  4. Connect the negative battery cable. Tighten the cable bolt to 11 ft. lbs. (15 Nm).
  5. Reset the radio, clock and any other applicable electronic devices.

Hope helped (remember comment and rated this).

Apr 24, 2010 | 1994 Oldsmobile Cutlass Ciera

1 Answer

I need to install a new radio in my '96 Oldsmobile Cutlass Cierra

Apr 18, 2010 | 1996 Oldsmobile Cutlass Ciera

1 Answer

1994 old cutlass ciera 3100 blown head gasket.

Get a Chilton's book on the car. It will take you thru the whole job, and give you the torque specs for putting it back together. You will need a torque wrench, foot pounds, and a good socket set.

May 04, 2009 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How to remove door panels

you will find what you need here
hope this helps!

Jan 23, 2009 | 1988 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1992 Eagle Talon Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts


Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Stewart Dibbs

Level 2 Expert

302 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides