Question about 1997 Pontiac Sunfire

2 Answers

2002 Sunfire 2002 PONTIAC SUNFIRE My transmission will not shift into any gears with the engine running and clutch fully depressed. It will shift into all gears without the engine running. I have to place the transmission in first gear, then start the engine before I can dive. Can speed sift thru all gears no problem There are no noises coming from transmission, all is quiet gbarkhouse@live.com clutch slave cylinder IS FULL WHEN YOU START ENGINE IN GEAR WITH CLUTCH DEPRESSED, CAR WANTS TO MOVE AHEAD, AND IS HARD TO PULL SHIFTER OUT OF GEAR

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

Check automatic adjuster on clutch pedal under dash .

Posted on May 08, 2009

  • tommy Nov 27, 2011

    did you get problem fixed? i have the same problem

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds like, the clutch pressure plate, is not opening. There are a few ways this might happen. There might be wear, in the pedal free play, or the cluch disc is excessivly worn. A good mechanic, may check the cluch pedal free play. Usually, as the clutch disc wears, the free play is reduced. most of the times, when the pedal is re adjusted, the cluch cannot open as much as it should. Most of the time clutches are sold in sets. A pressure plate, a disc, and a throwout bearing. A person just has to make sure the input shaft can align up, with the clutch disc, as the pressure plate bolts are tightened up. It is always best, to use new cluch pressure plate bolts and lock washer's.

Posted on Jul 05, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 Pontiac sunfire car wont shift out of nuetrel


Does the clutch pedal go to the floor? If not the clutch is not the problem and the transmission or transmission linkage is, inspect all components for loose or damaged components.

Jan 11, 2017 | Pontiac Cars & Trucks

1 Answer

My 98 sunfire is stuck in 1st gear,i think everything else is gone...what can i look for to fix it?


Assuming it's automatic transmission and given the age of the vehicle I would look for a new transmission on eBay or at a nearby car recycler. Rebuilding the stuck transmission, which would likely be needed, could cost more than what the car is worth. Also, there should be plenty of these gear boxes around - a very, very common vehicle.
If a standard gear box (never seen one in the sunfire but anything is possible) then the problem could be as simple as a broken or stuck shift cable/linkage. You can test the clutch separately - the car should be able to roll roll once you press the clutch - so if the clutch can disengage and re-engage then check your shifting linkage next.

Jun 08, 2014 | 1998 Pontiac Sunfire

1 Answer

1997 pontiac Sunfire will not shift into gear. I can shift it by hand with the lever on top of the transmission but it still will not move. Is there a vacum modulater on this model of car?


a vacum modulator does not prevent a car from shifting into gear. Usually when a car fails to move, internal parts of the transmission break and sometimes shatter prevent the clutch pack from functioning. The purpose of a vacum modulator is to allow the transmission to shift smoothly from one gear to the next, but now on allot of cars these days transmissions are solely controlled by the computer. If you transmission does have a vacum modulator then your will find a steel vacum line from the engine going to your transmission with short pieces of hose connecting the lines together.

Jul 28, 2012 | 1997 Pontiac Sunfire

1 Answer

1996 pontiac sunfire manual transmission wont shift


Does the clutch pedal engage? This sounds like a clutch problem to me.

May 25, 2012 | 1996 Pontiac Sunfire

1 Answer

I have a 1997 Pontiac Sunfire that has problems shifting into gear. (manual trany). Have to force into 1st, 3rd, 4th, 5th and especially in reverse. Will grind going into reverse. Have to turn off...


Sounds like the clutch is going out. I would check the operation of the clutch slave cylinder. Also check the clutch master cylinder fluid level.

Oct 18, 2010 | 1997 Pontiac Sunfire

2 Answers

5 speed manual transmission wont shif gears while running


You probably have air in the system. You need to bleed the air out of the system so that it will disengage your clutch. The air in the system is compressing and, therefore, the slave cylinder can't reach the full extension.

Aug 04, 2009 | 1998 Pontiac Sunfire

1 Answer

My transmission will not shift into any gears with the engine running and clutch fully depressed. It will shift into all gears without the engine running. I have to place the transmission in first gear,...


Check the fluid level on your clutch slave cylinder. Have someone depress the clutch while visually observing the movement of the levers under the hood. Could also be a bad throwout bearing.

May 08, 2009 | 1997 Pontiac Sunfire

2 Answers

2002 Sunfire TCC Solenoid replacement


hi..the transaxle converter clutch . tcc. uses a solenoid -operated valve located in the automatic transaxle to mechanically couple the engine flywheel to the output shaft of the transmission through the torque converter.that reduces the slippage loss in the converter.reducing emissions.but check the vss first.which is called the vehicle speed sensor.they both work together .if the vss is not working right it wont call on the tcc.
check this out..
thank u..
rate me..

Mar 06, 2009 | 2002 Pontiac Sunfire

Not finding what you are looking for?
1997 Pontiac Sunfire Logo

632 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...