Question about Chrysler Cars & Trucks

2 Answers

Cylinder #2 misfiring

How do i find cylinder number 2?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 5,280 Answers

It's a Chrysler, then?
If a 4 cylinder engine, number 2 cylinder is second from front of engine. Cylinders are numbered 1-2-3-4, from front to rear.
On a Chrysler v-6, number 2 is the first cylinder on the left side of engine. Cylinder numbering is 1-3-5 on the right side, front to back, and 2-4-6 on the left side of engine , front to back.
So if you have a transverse engine (sitting sideways), and the front of engine is on the passenger side of car, number 2 cylinder will be the cylinder nearest the front on the radiator side of engine- the left side of the engine.

Posted on Nov 28, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,198 Answers

A Chilton or Haynes manual will show that. Sometimes under the hood is a picture showing how the vacuum lines and belts go, it just may mention the plug wires...........

Posted on Nov 28, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

linhnguyennn
  • 1 Answer

SOURCE: 97 isuzu hombre cylinder 2 misfire

1998 isuzu rodeo wont start no spark,no injector pulse

Posted on Jan 24, 2009

  • 147 Answers

SOURCE: 2001 Honda Odyssey which cylinder is number 2? (3.5 L V6)

see your spark plug cables they have writen in begining or ending what number spark is. or in the joint electrical box from they take electricity have writen in it in any output what number of cylinder cable spark id going.

Posted on Apr 07, 2009

haider_alhar
  • 90 Answers

SOURCE: It has a number 2 cylinder misfire. I have already had the plugs, plug wires, and the back coil changed, and it still says it has a number two cylinder misfire. What can I try next?

misfire caused by leaking in the intake valve you must chek it , or may be your car is working rich that means fuel - air mixture is not on the right ratio so check your oxygen sensor

Posted on May 30, 2009

  • 1 Answer

SOURCE: Number 6 cylinder misfire

Where cylinder #6 inengine?,Ford Escape 2002,6cyl

Posted on Sep 30, 2009

  • 603 Answers

SOURCE: I have a misfire on cylinder 2. How are the

2000 Hyundai Elantra GLS Sedan
2.0 liter DOHC L493051901.gif

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 kia spectra misfire


bad senser or computer

Dec 11, 2013 | 2002 Kia Spectra

1 Answer

Number 3 and 4 are not firing from coil on 2002 subaru outback 2.5


its faulty coil.

Get the compression test done on each coil.these will let you know if its faulty coil or not.

=========

It can be issue with spark plugs or faulty spark plugs. Also get the compression test done for cylinders. If any of cylinder shows low compression then required, then that particular cylinder will cause misfire.

Also get obd codes scanned, the error code will let you know which cylinder is misfiring or all cylinders are misfiring.

-----------

For your trouble shooting I suggest you to refer the help oinks below. It has step by step details for many engine misfire issues.

----------


Click the link below:-----


Ford Explorer Cylinder Misfire?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-cylinder-misfire.html

---------

Engine Misfire codes on Chevrolet Malibu?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

---------

Cylinder 6 Misfire?

http://howtobyme.blogspot.com/2011/12/cylinder-6-misfire.html

------------

Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----

While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

----------

Ford Explorer 5.0L: Engine Miss?

http://whoisbyme.blogspot.in/2012/06/ford-explorer-50l-engine-miss.html

-----------

Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

------------

Can cylinder misfire Damage the Catalytic converter?

http://schematicsdiagram.blogspot.in/2012/02/can-cylinder-misfire-damage-catalytic.html

------------

Car misfires and error code P0306 and P0303 is shown?

http://technoanswers.blogspot.com/2012/01/car-misfires-and-error-code-p0306-and.html

-----------

Chevrolet K1500 No spark, random misfire

http://repairhelpcenter.blogspot.com/2012/11/chevrolet-k1500-no-sparkrandom-misfire.html

-------------

2004 Ford F150: Engine Misfire and Lean Code?

http://whatisbyme.blogspot.in/2012/05/2004-ford-f150-engine-misfire-and-lean.html

-----------

1995 Toyota LS: Misfire at idle or low RPM

http://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

--------------

Toyota Corolla: Random Misfire?

http://technoanswers.blogspot.in/2012/04/toyota-corolla-random-misfire.html

----------

2006 Ford Freestar: Misfire on Cylinder Number 2?

http://whatisbyme.blogspot.in/2012/06/2006-ford-freestar-misfire-on-cylinder.html

-----------------------------


This will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

2 Answers

Flashing SES, P0305, and P1145


A flashing SES light means that you are operating the vehicle under conditions that are DESTROYING your catalytic converters! This is not good.

Diagnostic Test Code (DTC) P0305 is defined by SAE J2012 as "Cylinder 5 Misfire Detected".

DTC P1145 is a "manufacturer-specific code" and is defined by Nissan as "Bank 2 Intake Valve Timing Control Position Sensor - High Or Low Voltage"

So, to put it simply, you need to find out WHY cylinder #5 is misfiring and get it fixed. You also need to diagnose the intake valve timing control position sensor circuits on bank 2 to (1) find out if the voltage is HIGHER or LOWER than specification (since the code itself is not specific about which it is). And (2) find out what is CAUSING the voltage to be out of specification and take the appropriate action correct it.

Apr 27, 2012 | 2002 Nissan Pathfinder

1 Answer

What are codes 302 303 misfire that come up and how do i fix it


the codes are p0302 and p0303 p0302 if a misfire in cylinder number 2 p0303 is a misfire in cylinder number 3

Mar 30, 2012 | 1997 Honda Accord

1 Answer

Check engine flashing


this usually indicates a cylinder misfire. Two things you can do.

1. remove the coils or wires one at a time until you find the cylinder that is not working. Than inspect the components on the cylinder (plug, wire, coil, etc)

2. scan the computer for codes. You should get a P030X (the X will be a number 1-6 depending on what engine you have). whatever number is shown is the cylinder that is misfiring. for example P0304 would be a number four cylinder misfire, P0302 would be a number two cylinder misfire.

Dec 05, 2011 | 1998 Honda Accord

2 Answers

Detected problem with P0302 misfire what is this


p0302 is number 2 cylinder misfire. it could be anything from plug, plugwire, or the coil for that cylinder. check plug and or wire first. have a good day ! p0303 is # 3 cylinder etc.

Jun 26, 2011 | Chrysler Cirrus Cars & Trucks

1 Answer

Missing,viborating


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The vibrating tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2009 Ford F-150

1 Answer

Po300,301,302,161,306 code numbers,what are they.upon acceleration it is like gas is having problem being sent to engine


P300 is random multiple misfire,301 is cylinder 1 misfire. 302 is cylinder 2 misfire & 306 is cylinder 6 misfire. P161 is a bad heater circuit in oxygen sensor bank 2 sensor 2. It is behind catalytic convertor. I would replace downstream oxygen sensor & clear codes. Run vehicle it may be all that is wrong.

Apr 04, 2011 | 2001 Dodge Dakota

2 Answers

Why is my 1997 expedition showing a misfire on number 2 cylinder OBD code PO302. Also I am getting code readings PO174 andPO171 system to lean on Bank 1and 2


PO302 is being a misfire, could mean the plug is bad or the coil is bad for that cylinder. Which can give you the misfire reading and the system to lean codes. Check the #2 coil for firing.

Jan 28, 2010 | 1997 Ford Expedition

1 Answer

It has a number 2 cylinder misfire. I have already had the plugs, plug wires, and the back coil changed, and it still says it has a number two cylinder misfire. What can I try next?


misfire caused by leaking in the intake valve you must chek it , or may be your car is working rich that means fuel - air mixture is not on the right ratio so check your oxygen sensor

May 30, 2009 | 1999 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...