Question about 2006 Chevrolet Silverado 1500

Open Question

What size is the axle nut on a 2006 4x4 chevy silverado

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
robslac24
  • 2 Answers

SOURCE: 01 Chevy Silverado 4 X 4 not working. 4WD light

Having the same exact problem but with my 1999 escalade. Thought it was the actuator bought a new one installed it transfer case would engage but front end wouldnt lock. Took it out of housing left it plugged in got a friend to go through all the 4wd for me and the plunger never moved out the actuator. Checked my wiring harness which is a four prong ann it had one hot prong like it is suppose to. Traced wires even replaced dash switch same problem. Taking it to local dealership tom to have it checked for codes. I was told it could be the transfercase actuator even though its workin that actuator is what sends power to the front to engage the actuator to lock the differential.

Posted on Sep 16, 2009

Ad
  • 733 Answers

SOURCE: i dont no the size of the bolt on my drive axle

If it's still driveable, just remove the hub cap and go to autozone and have them check it out for you. they'll give you the right size socket.

Posted on Nov 21, 2009

  • 346 Answers

SOURCE: what size is the drive axle nut on an 02 chevy

It's either 32 or 36mm. I believe 32. You can "borrow" the socket size that you need from your local AutoZone parts store.

You pay for the tool, then when you bring it back, they give you your money back. It's a program they have for tools that the average person doesn't use more than once or twice.

Posted on Dec 27, 2009

  • 75 Answers

SOURCE: What is size of hub axle nut on 2002 chevy s10?

2002 chevy S10 ZR2

36 mm.
Torque 103ft pounds.

Posted on Mar 16, 2010

Testimonial: "Great, thank you! At 7 to 15 bucks a pop for one socket, it helps to buy the right one the first time."

  • 1 Answer

SOURCE: 04 chevy silverado 4x4 left front axle removal

how to remove front axle on chevy 4x4

Posted on Oct 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size is the axle nut on 2007silverado4x4 1500


Hello,

You can find this specific information utilizing http://www.rockauto.com I looked under a Silverado 1500 and found the following: Thread Size: M14-1.50; Hex Size: 22mm; Conical Seat - 60degree; Zinc; Overall Length (In): 0.807; Open End Design: Yes; Steel

Sincerely,

Apr 08, 2014 | 2000 Ford Taurus

1 Answer

Socket Size?


That looks the same as on FWD GM cars, and they are 36 mm.
Use a metric ruler and measure from side to side-that will tell you.

May 31, 2013 | Cars & Trucks

1 Answer

What is the torque spec for the front center axle nut on a 2003 tahoe?


The torque specs.are for 15k series trucks is 155 ft.lbs.For 25/35 series it`s 133 ft.lbs.Hope this helps.Good luck.

Dec 03, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

How do I remove the front left axle shaft on a chevy 2007


remove the axle nut first, always took the upper ball joint loose just take the nut off apply some upwards pressure and hit spindle with hammer and it will allow you to move the hub and all out enough to remove axle. the upper ball joint nut has to come off
and seperate the ball joint from the steering knuckle
then plenty of room. good-day ! then just slide axel out,or pry between axel and ****** to pop it loose, it has a locking clip on transmission side. when putting back in make sure axel is locked in ******. and do not forget to torque axel nut when done.

Aug 05, 2011 | 2000 Chevrolet Silverado

1 Answer

Replace 2002 chevy silverado 1500 4x4 wheel bearing


jack up pull wheel, pull brake caliper and bracket, take nut off axle in center of bearing on back side where axle goes in should be 4 bolts make sure to dis connect abs sensor cause its comin with the bearing that should be bout it some times they come out hard but the will come out

Jul 25, 2010 | 2002 Chevrolet Silverado

1 Answer

How to get front rotors off and r they nock offs or do i have to take a nut off? 2000 chevy silverado 2wd


mcdevito75 here, They should be knockoffs, That castle nut is holding the hub / Bearing assembly to the axle, and once removed that nut has to be replaced with a new one, so it"s not reasonable that nut has to come off to get the rotors off. Try, remove the tire and lift the caliper assembly off the rotor, use penetrating oil, liquid wrench, W D 40 around the lugs as they may be part of the rotor assembly, Then with a hammer tap moderately around the edge of the rotor to loosen it, keep the gear in Neautrel so you can turn the rotor while tapping with the hammer and use that penetrating oil around the lug studs and around the hub. The rotor should fit around the hub where that nut is and thru the lug studs that hold the tire on the axle.

Jun 17, 2010 | 2000 Chevrolet Silverado 1500

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

2005 chevy 4x42500hd


Hi..
On your 05 Chevy 4X4 2500HD.
The Pinion Yoke Nut, 9.75" Axle. the torq spec. is 370 Nm. -- 273 Lb ft.

I hope this help on your question.

Thank you for use fixya...

Nov 04, 2008 | 2008 Chevrolet Silverado 2500HD 2WD

Not finding what you are looking for?
2006 Chevrolet Silverado 1500 Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...