Question about 1995 Chevrolet S-10 CA Edition

1 Answer

Need to remove door inside door panel to replace mirror and manual window crank handel. How does the pannel come off?How does the window crank come off?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

There should be screws located behind the inside door handle and around the armrest.. they need to be removed. The bottom edge should be secured by friction anchors that simply need to be pryed carefully loose by prying the bottom edge of the door panel away from the door.
Proceed slowly as not to damage clips or panel

Posted on May 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing mirrors to camping mirrors, 2009 silverado 2500 HD crew cab LTZ. got mirrors loose, but can't get cord out to unplug and plug in. appears that I have to take door panel off to remove cord and...


remove any snap in covers
remove retaining screws
panel will then lift straight up
snap in cover around door release (open) handel
power windows etc.etc.
retaining screws aroun handel (under plastic snap trim)
around lower section etc. etc.

Jul 02, 2011 | 2009 Chevrolet Silverado 2500HD

2 Answers

Someone hit my drivers side mirror an brokr it off, How to fix, both broke off on mirror housing?


Remove inside door panel,then mirror

Buy new mirror at dealer or salvage yard

Mar 14, 2011 | 1994 Buick LeSabre

1 Answer

How do i remove the wing mirror (power adjust & power fold) on the ford f250 super duty?


Roll the window down first, you will need 2 hands. Pull the small cover off that is at the top front of the door pannel. You will then disconnect the wire connector and remove the three 11mm nuts that are holding the mirror in place. Pull mirror out and replace.

If you dont have just that little pannel you will have to remove the door pannel. If you dont have power windows pull the cover out on the window crank and move it to the side, there will be a screw holding the crank in place. Remove it. If you do have power windows remove the window control switch plate (it will just pop up using a small screwdriver) and disconnect the wires. If equipped, remove the front door trim panel reflector or the courtesy lamp lens. Then remove the screws. DO NOT pull directly outward on the door pannel, something will brake. Remove the front door trim panel by pulling it straight upward.Lift and remove the front door trim panel. Then the nuts holding the mirror will be visible, remove and replace the mirror.

Dec 07, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

How to remove the inside door panel from a dodge 2005 2500 pick up


FRONT DOOR TRIM PANEL - REMOVAL
Release door latch and open door.
Roll window down.
Remove window crank Window Crank - Typical , if equipped.
Remove screws attaching trim panel to door Door Trim Panel and Trim Panel Screw
CAUTION: Do not forcibly pull trim panel from door, damage to trim panel may occur.

Simultaneously lift upward and outward to release retainer steps from inner door panel Trim Panel Retainer
Disengage inside handle linkage rod from inside handle.
Disconnect speaker harness wire connector Speaker And Power Mirror Connector
Disengage power mirror wire connector, if equipped (driver's side only) Speaker And Power Mirror Connector
Disengage clips attaching power window/lock switch panel to door trim panel. Disengage wire connector from switch panel, if equipped Power Door Lock/Window Connector
Separate door trim panel from vehicle.
INSTALLATION
Position trim panel at door.
Engage wire connector for window/lock switch panel, if equipped. Engage clips attaching power window/lock switch panel to door trim panel.
Engage power mirror wire connector, if equipped.
Connect speaker harness wire connector.
Engage inside handle linkage rod to inside handle.
Align trim panel retainer steps with inner door panel and slide trim panel into place.
Install screws attaching trim panel to door.
Install window crank, if equipped.

Hope helped with this; remember rated this help. Good luck.

Nov 12, 2009 | 2005 Dodge Ram 2500 Truck

1 Answer

Tahoe passenger door won't open


remove vertical screws from arm rest. ther may be other screwscovered by plastic caps. pull small triangular cover at top near dash covering mirror mounting bolts. pop window and lock switches up and out of the door pannel and be carfull when removing electical connections from those switches. then pop plastic panel around inner door handel out and turn to free from handel. Now u can start to remove the door panel. U can by a special tool at your parts store to pop the clips on the inside of panel or just pull it off starting from the bottom and working yourwhay around the sides and up to the top. then push upwards from the bottlm and the top lip should pop free of the door.
hope this helps

Aug 09, 2009 | 1998 Chevrolet Tahoe

2 Answers

Replacing passenger side mirror


no the door pannel does not need to come off but there is a triangle shaped plastic trim pannel above the door pannel that needs to be removed to access the mounting bolts.

May 28, 2009 | 2003 Nissan Xterra

1 Answer

Need to install a passenger side mirror on my 1992 Honda Civic


Remove the door panel, one screw at the inside handle and one at the door pull hole, one plastic screw clip under mirror, use universal window crank removal tool to pop out a wire thin horse shoe shaped clip from the window crank if you loose it you can get another at the auto parts store for 50 cents. Gently pry off door panel, gentley pry off inside mirror cover from the top. Remove three screws to remove outside cover, Install mirror using 8mm head size nuts, reinstall.

Mar 12, 2009 | 1992 Honda Civic

1 Answer

Left power mirror replacement


There is a Technical Service Bulletin on the power mirror actuator for replacement. If your mirror just stopped operating, I would take it back to the dealer and they will fix at no charge due to the TSB.

For removing the door panel


  1. Remove window crank handle or power window switch assembly (if equipped).
    • Disconnect harness connectors.
  1. Remove pull handle escutcheon.
  2. Remove pull handle cover and remove screw.
  3. Lift armrest upward to release clips and remove armrest.
    • Remove front door finisher screws behind armrest.
  1. Release clips and remove front door finisher.
    • Disconnect lock cable and handle cable from inside door handle assembly.
38356f4.jpg

Feb 11, 2009 | 2007 Nissan Xterra Off Road

1 Answer

How do you remove the passenger inside door panel?


unscrew all screws dont forget any! some maybe hidden look closleycheck the handle and disengage all its parts aswell. now start from the bottom of the door pannel and pull there are plastic pins that hold it on they will pop out. after they are out from both sides and bottom it gets easier lock nob may need to come off. if you have electric door and window locks be carefulll unplug them if you can first.if not be carefull! now lift door pannel up straite up it will come off the door. Have a go!

Dec 27, 2008 | 1997 Isuzu Hombre

1 Answer

How do you remove a window crank on a 2001 dodge dakota


you need to push in on door panel at same time in between the door panel and Handel their is a horse shoe clip you will need a "Mechanics DENTAL PICK! to pull it out to release the crank Handel! most part stores will carry that tool!

Dec 22, 2008 | 2001 Dodge Dakota

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...