Question about 1994 Chevrolet S-10 Blazer

1 Answer

Truck will not stay running after removal of security system.

My friend has a 1997 chevy blazer...he recently removed the security system from the teuck and now the truck will not start with the key ( ignition... it will start with the remote start but when he presses the brake pedal to shift into gear the truck stalls...any help would be appreciated

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You probably need to do the relearn process to reteach your ECM or PCM . dont try to start it but turn the key on for 10 mins until all the idiot lights go off, turn the key to off for 5 seconds and repeat the process 2 more times for a total of 3 cycles. It should be fine after that. I am no expert but it worked for mine.

Posted on May 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Van will start but not stay running 97 chevy venture


If it starts for 5 seconds out less, and you notice a security light on the dash, go to this link for answers. Gm are notorious for failing antitheft systems http://vatspasslockpasskeysecurityhelp.yolasite.com/

Oct 02, 2011 | 1997 Chevrolet Venture

1 Answer

Rear brake line was removed and now i need to bleed the system 1997 chevy blazer any special tools needed ?


you need a 1/4 or 5/16" wrench and procedure requires bleeding all corners staring with furthest away from master cylinder working your way closer (Rt Rr, Lt Rr, Rt Frt, Lt Frt)

Mar 02, 2011 | 1997 Chevrolet Blazer

2 Answers

1997 chevy blazer truck won't start no nosie from fuel pump chang


Replace the fuel filter. It should be in line with the fuel pump on the inside of the frame on the driver's side forward of the pump. There should be 1 or 2 bolts securing the bracket in place. Leave them tight and remove the fittings on the front and rear of the filter. Fuel will begin to leak from the lines as you loosen them so keep you face safely away from that area. Once the fitting nuts are backed out completely, remove the bracket bolts and then the filter. Reverse the steps to reinstall.

May 15, 2010 | 1997 Chevrolet Blazer

1 Answer

How do I remove the steering wheel from a 1997 Chevy blazer?



Hi,

If you are trying to remove the steering wheel to change the ignition switch, then you may not have to. The switch is on the steering column about 1/2 down towards the floor, and has a rod that runs from the key cylinder & locking part. You dont need to remove the steering wheel, but if you do so, I suggest you to take some help from some Paint and Body shop so that they can direct you to do it properly and safely.

Do let me know if it helped.

Kanu

Oct 04, 2009 | 1997 Chevrolet Blazer

1 Answer

My 1997 chevy blazer does not have a 4wheel drive switch


If there is no switch present then it is full time 4X4, it does not disengage, good for travel bad for fuel mileage.

Sep 08, 2009 | 1997 Chevrolet Blazer

1 Answer

1997 Chevy Lumina 3.1L Security Light Problem


check your inteior light switch. for a tempory fix remove the bulb

May 14, 2009 | 1997 Chevrolet Lumina

1 Answer

Lights stay on


Check the pin switches on the ends of the dash. Also if the temp gauge is low replace the thermostat. If the temp gauge reads about 190, flush the heater core.

Mar 14, 2009 | 1997 Chevrolet Blazer

1 Answer

Starting Problems AGAIN


Personally, I would return it to the dealer and state that is still not fixed.
When the remote start / security system was removed or disconnected, the starter circuit would have had to be rewired as the remote start / security system prevents the starter from engaging.
The wire splicing that would have had to take place may still be a problem.
If you would rather diagnose this problem your self I will be happy to help.
Let me know.
Regards,.

Feb 19, 2009 | 1999 Chevrolet Blazer

1 Answer

Day lights


Yes there is, remove the DRL relay located underneath the hood in the fuse box. Hope this helps let me know if you need any farther assitance. Thank you for using fixya.com

Sep 29, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...