Question about 1997 Nissan Pickup

Open Question

How do you remove a power steering pump from a 97 nissan pick up truck

I have removed the power steering pump pully now need to know how to get the pump off to replace it.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Were is power steering pump located at


It appears it is under the AC Compressor. Both appear to share a belf for their repsective pumping activities. It should be possible to locate by tracing the hoses from the Power Steering Fluid resevoir (where you add fluid) to the devices behind pullies under the the air filtration system
Perhaps this link will be helpful
Repair Guides Power Steering Pump Removal Installation AutoZone com

Apr 30, 2014 | 2011 Nissan Juke

1 Answer

Well, do i remove the power steering pump or pull the pully to remove the water pump and if the pump, is access from underneath ??


you have to remove your power steering pump to replace your water pump you remove one bolt from the top and one from underneth by going threw holes in power steering pump pully

Sep 17, 2011 | 1995 Oldsmobile 88

1 Answer

I WILL LIKE TO KNOW HOW CAN I REPLACE THE POWER STEERING PUMP ON A 2001 CHEVY MALIBU


1. Remove serpentine belt

2. loosen power steering pressure and return hoses

3. Remove nut from pressure line mounting on alternator bracket

4. remove power steering pump mounting bolts.

5. Lift pump assembly from engine mounting and remove hoses.

6. Reverse order to install. Fill and bleed system.

NOTE: A new or rebuilt power steering pump will most likely not come with a pulley attached. You will need a power steering pulley remover/installer tool to transfer the pully from the old pump to the new one.

Feb 19, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

How to replace power steering belt on 97 nissan maxima


to take it off get a 3/4 rachet and it fits into the tens. pully. push it down and the belt will come loose make sure you hold it. with the other hand remove it off of any pully normaly the idler pully will be best one to use then when you have it off that pully slowly easy up on the rachet and remove so you can take the belt off. then you will see a pic of how the belt should look when you replace the new one and remember how it looked before always helps too

Apr 09, 2010 | 1997 Nissan Maxima

2 Answers

Removing water pump on 97 grand prix gt. Power steering pully in the way. Do I have to access mounting bolts to the power steering pump from underneath the car?


no you have to go thru the holes in the front of the power steering pulley. Usually a ratchet with a deep 13mm socket will do to remove the 2 bolts located at 12 and 6 o'clock then you will be able to move it out of the way

Jan 09, 2010 | 1997 Pontiac Grand Prix

1 Answer

How to remove the power steering pump? the steering pump is disconnected but can't get it out


you need a power steering pump pully remover the pully has too be removed before you can take it out

Nov 29, 2009 | 1997 Ford Escort

1 Answer

How to remove pully to the left of the water pump 98 pont .3.8 .trying remove last bolt onthe left but pully is in the way


If I remember correctly, that should be the pulley for the power steering pump, You're going to need to remove the power steering pump to get to it.

Nov 20, 2009 | 1998 Pontiac Bonneville

1 Answer

Power steering belt removal


You need to loosen the large mounting bolt at the base of the power steering pump as well as the tension adjusting bolt on top of the unit that is attached to the slotted arm. You may need to use of a large pry bar to gently force the pump inwards to gain enough slack to remove the belt.

May 07, 2009 | 1997 Nissan 200SX

1 Answer

89 S15 4.3L Need instructions to remove and install pwr steering


i know what bolt your talking about,you canreach it thru the wheel well with an extention!!!
but if your just removing the pump,some of the pullys have three holes in them too get too the pump bolts if not then you need a power steering pump pully remover auto zone loans them out!!!!

Feb 28, 2009 | 1989 GMC S-15 Jimmy

1 Answer

Power steering fluid


you either have the wrong type of fluid in it or the pump is going out. to change pump take the right side\passenger side tire off and remove the plastic cover and get to work (youll need a pully puller to get the pully off the pump fyi)

Jun 23, 2008 | 2001 Nissan Sentra

Not finding what you are looking for?
1997 Nissan Pickup Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...