Question about Cars & Trucks
Hi, i have a 2003 bmw x5 and i recently got new tail lights, but the light keeps coming on stating that i need to check my rear break lights. They work just fine. How do i reset this light.
Insert key into key slot and press the start stop button once WITHOUT putting your foot on the break. You should see numerous lights turn on,on the dash
weight for any warning lights to go out, in some cases, like low fuel warning light, you my need to press the BC buttonon the end of the indaca tor stalk once to remove them
press and hold the black button, on the bottom left of the speedometor, but keep holding down the button untial the next picture appers then release the button.
to cycle threw one by one all of the picture optctionsfor each service press black button once. when you arive at the SERVICE that you wish to reset press AND HOLD THE BLACK BUTTON until the text RESET?is visible under the picture then let go,finily press and hold the button again to conferm the reset.
Posted on Nov 27, 2013
Testimonial: "Thank you!"
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1st verify that the brake lights work, if not replace the burnt bulb, if they are ok then the warning module is defective.
Posted on Aug 18, 2008
You can reset your service indicator, as follows:
Posted on Jul 29, 2009
Hi , to reset the service light you will need to insert the key and turn the ignition lights on but do not start the engine. you will see a push button on the lower left side of the instrument panel press and hold this until you have a triangle appear which then turns to the brake warning symbol , release the push button then press and hold the bc button in the indicator arm until reset appears , release and again press and hold the bc button until you have a moving clock symbol appear , release the bc button and wait for the display to change , once this has reset turn off the ignition and the service symbol should have reset . you may want to print these instructions before resetting , regards Mark.
Posted on Oct 20, 2009
partially remove the desired light by remove the 4 8mm screws, two ont the top and two at bottom behing the light, pull the light out far enough that you can see the socket,you should be able to remove it at that point.You should also check the contact of the bulb as it is most likely burned or melting and has damaged the socket so you should replace he socket and bulb as the warning may still be present even though the bulb works.Also the rear tail lights have a corrosion and burning issue as well on the brake contacts.
Posted on Mar 29, 2010
Tips for a great answer:
Jan 11, 2018 | BMW Cars & Trucks
Oct 25, 2016 | BMW Cars & Trucks
Dec 03, 2013 | 2003 BMW X5
Nov 27, 2013 | Cars & Trucks
Nov 26, 2017 | BMW X5 Series Cars & Trucks
Mar 02, 2011 | 2005 BMW X5
Oct 16, 2010 | 2003 BMW 5 Series
Feb 23, 2010 | 2003 BMW 5 Series
Jan 08, 2010 | 2005 BMW X5
Jul 29, 2009 | 2005 BMW X5
80 people viewed this question
Usually answered in minutes!