Question about Cars & Trucks
The cause for the wipers not parking is the park tab on the wiper motor bracket is bent, replace the wiper motor bracket. as for the wipers not working at all, could be a faulty part. fit your old motor back onto the new bracket and test.
Posted on Nov 27, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The blower motor resistor is located behind the glovebox mounted in the fan housing box under the dash.
Posted on Jul 20, 2009
I had this problem two years ago on my Audi A4. First you must diagnose this problem. In order to find out the cause of wipers stopping you can try follows: 1. Carefully extract the wiper arms from their axles (two pieces). In some cases you need to use an extracting tool. Heed of the windscreen !!! 2. Disassemble the plastic covers from the bottom of the windscreen. 3. With the bonnet up you can start the engine, (transmission in "N" or "P" position and parking brake on). Now you must switch on the control lever of the wipers, and go to the engine compartment. If the wiper motor runs let the wiper motor running for a few minutes and switch off. Go to the step 4. If the wiper motor do not runs you must check first the electrical feeding of the motor. It is necessary to unscrew three bolts of the mechanism and disconnect the electrical coupling (difficult assurance). If the electrical feeding is OK you must replace the motor - steps 5, 6, 7. If not you must check electrical connections, the control switch of wipers and electric cables. 4. Now you must check the two bearings of wiper mechanism with your hand. In the most cases the left bearing is out of order (is very hot). This is the most encounter fault of the wipers running at Audi. 5. For have enough space to manipulation the wiper motor together with their mechanism you must extract the plastic cover of the engine computer box, and extract also the box screws. Then you can move slowly the engine computer box, just for a few milimeters. 6. You must disconnect the electrical coupling of the motor (difficult assurance), unscrew three bolts of the mechanism and extract together with the motor. You must move them slowly between windscreen and engine computer box until the wiper motor go out together with the mechanism. This is the most difficult operation! 7. Now you can repair the bearings, replace entire wiper mechanism or replace the wiper motor. It is not very simply, but it works. Heed of the windscreen !!! Refit in reverse order. Please Rate my Response! Thanks!
Posted on Sep 29, 2009
You don't have to put the wipers in an upright position You can take the arms completely off. It's very easy to do, when you are looking at the base of the wiper arm, on the side closest to the windshield, at the base, there is a spring-loaded tab. Lift the arm on its hinge to where the arm is now pointing away from the windshield, pull the tab and the wiper arm will slide right off. Now you can access the linkage joints easily. Hope that helps!
Posted on Nov 09, 2009
Tips for a great answer:
Jan 08, 2017 | 2005 Ford Escape
Feb 28, 2015 | 2005 Chevrolet Impala
Aug 13, 2014 | 2005 Chevrolet Impala
Oct 22, 2013 | 2005 Chevrolet Impala
Apr 14, 2011 | 2005 Volkswagen Passat
Mar 02, 2011 | 2005 Chevrolet Impala
Feb 23, 2011 | 2005 Audi A4
Feb 01, 2009 | 2005 Chevrolet Impala
Dec 10, 2008 | 2005 Chevrolet Impala
60 people viewed this question
Usually answered in minutes!