Question about 2003 Honda Accord
It doesn't make any noise it wont turn no crank
Check the battery like this:
Turn on the headlights, then try to start the car.
If the headlights do not dim or go out, then the battery is likely ok.
Check that the battery cable plus post, goes to the starter, Minus post to a good ground, like the engine.
If wiring is ok, then look at the starter solenoid for a good connection.
Problem is most likely the Solenoid or starting relay, whichever the car uses.
Hope this helps.
Posted on Apr 03, 2015
Check battery connections, if they are good check the power supply from the battery to starter motor (thick cable), if this is good have someone crank it while you check the signal wire to the starter motor(thin wire), if this is good replace the starter motor. u could tap the starter motor with a hammer if accessible while someone is cranking it, sometimes this will get the starter going again but will still need replacing
Posted on Nov 27, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: wont start
sounds like your not getting power to the starter. check the connections on the battery and the starter to see if any thing is loose. if not you could try taking off the starter, and taking it to a part store and have them test it.
Posted on Jan 02, 2009
SOURCE: 97 sebring lxi, 2.5L -
first thing you got to do is determen weather its electrical or fuel problem, you can take a test light and hook to a ground and the light end to a spark plug and see if it lights while someone turns over engine, if it lights you got spark. if its got spark, on to fuel, take fuel pressure test, don't think because you can hear pump working does not mean it is, it can sound like it is but its not, at least putting out enought pressure, not the correct amount it will not run. pumps will go out just that way with no warning at all.
Posted on Feb 03, 2009
check your relay box (under the hood black box) for corrosion, just had that on my van and it was a blown relay fuse from a bad connector. Also there might be an issue with the distributor itself (the thing the coil conects to) as that is symptomatic of that. To start- and for sake of ease- wiggle the black box after reseating the fuses (not the clear top ones yyou can see them blown without removing) give the box a good wiggle and a tap or two (not he-man taps mind you) while someone tries to start it. if this all is useless please let me know.
Posted on Aug 20, 2009
Tips for a great answer:
Apr 04, 2017 | 2003 Honda Accord
Aug 29, 2013 | 2003 Dodge Dakota Club Cab
Nov 02, 2017 | 1998 Honda Accord
Sep 24, 2012 | 1995 Honda Accord
Jun 13, 2011 | 2003 Honda Accord
Jul 19, 2017 | 2003 Honda Accord
May 23, 2011 | Lincoln LS Cars & Trucks
Apr 21, 2010 | 1991 Honda Accord
Mar 20, 2009 | 1989 Ford Bronco II
156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: