Question about 2004 Mercury Mountaineer
Depends do you want it to never work ? If you do that the auto will not start the alarm is wired into the egnition syatem part of the security.
Posted on Nov 28, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My name is Dennis and I can assist you to finding your parking brake adjustment location.
1) the adjustment is located so that you have to remove your center console floor finish panel (this is the drink holder).
2) raise your parking brake lever and gently pry the plastic tabs from the center console.
3) Once you can see the park brake lever you will see a nut that is turned to adjust the lever so that it has 5 clicks when it is applied.
Glad to be of assistance and thank you for using FixYa. Please rate the solution because I can learn from your rating (and it keeps my rating up to date). Thank you, Dennis
Posted on Nov 16, 2008
The power distribution box is
located in the engine compartment.
The power distribution box contains
high-current fuses that protect your
vehicle’s main electrical systems
The starter relay is in position #56 of that box.
Posted on Mar 23, 2009
The best way to change it is to flush it out You can do it yourself, but I do not recommend. A shop that is good like a Monro or Firestone usually charges about 100 bucks to flush and that includes the fluid. If you do it yourself, you will save about 60 dollars, but you risk damage to your radiator.
you will need a hose and an adapter. you back out the lower, or upper cooler line for your trans, whichever is the easiest to get to, (Some trucks have an auxiliary engine oil cooler, but make sure you are flushing the trans lines) put the adapter into the rad where you removed the line, and put a hose from each one down into a bucket. Have about 14 qt's of ford trans fluid ready. Put the funnel into the trans dip stick, and start the engine. pour the qts into the dipstick tube while the old fluid is pumped into the bucket. When you have about two gallons pumped into the bucket shut the engine off and reattach the line into the radiator. start up the engine and check your level. Fill with additional fluid if needed.
note: some say you should drop the pan. two things, you only change half the fluid when you do it that way, and second if you need to change the filter because it is clogged, it is too late for the transmission. The filter is only there to protect the valve body, not keep the fluid clean.
Hope this helps
Posted on Nov 22, 2009
Tips for a great answer:
Jan 21, 2017 | 2004 Mercury Mountaineer
Feb 28, 2016 | Mercury Mountaineer Cars & Trucks
Dec 27, 2014 | 2005 Mercury Mountaineer
Jul 05, 2011 | Mercury Mountaineer Cars & Trucks
Mar 21, 2011 | 2004 Mercury Mountaineer
Feb 04, 2011 | 2004 Mercury Mountaineer
Jan 31, 2011 | 2004 Mercury Mountaineer
Jan 27, 2011 | 2004 Mercury Mountaineer
Jul 20, 2009 | 2000 Mercury Mountaineer
Jul 16, 2008 | 1997 Mercury Mountaineer
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: