Question about 2005 Suzuki Forenza

1 Answer

Timing procedure for 2005 suzuki forenza - 2005 Suzuki Forenza

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

What engine, most cars have many choices new.. what is yours.
"Displacement or VIN"
cam
or
spark?
btw its really a Daewoo Lacetti from S.Korea makers.
by a real FSM.
or got to alldata.com and read

here is the list of engines
1.4 L 93 bhp (69 kW) Petrol I4
1.6 L 109 bhp (81 kW) Petrol I4
1.8 L 120 bhp (89 kW) Petrol I4
2.0 L 132 bhp (98 kW) Petrol I4
2.0 L 121 bhp (90 kW) Petrol I4
2.0 L 121 bhp (90 kW) Diesel I4

before working on any car, engines. in the USA (where you?)
open hood, look up see that vacuum and smog tag there
and it tells you what engine you have,
than ask questions based on that.

the USA forenza uses the
The US model line features the 2.0 L 4-cylinder E-TEC II made by General Motors, developing a maximum power of 132 horsepower at 5600 rpm.

this is a DOHC engine, 2 cams
and a belt (rubber band engine)
cam timng, im not repeating the 38 steps in the manual or torques/
but the crank cog mark is down aligned with the bottom pan mark
the cams are both at 12pm, aligned with markes on back top pan.

install (cut and past just first 8 steps) 2.0L E-tec II only)

  1. align the timing mark on the crankshaft gear with the notch on the bottom of the rear timing belt cover.
  2. Align the timing marks on the camshaft gears, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
  3. Install the timing belt.
  4. Turn the hex-key tab in a clockwise direction to tension the belt. Turn until the pointer aligns with the notch.
  5. Install the automatic tensioner bolt and tighten to 18 ft. lbs. (25 Nm).
  6. Rotate the crankshaft two full turns clockwise using the crankshaft pulley bolt.
  7. Recheck the automatic tensioner pointer.
  8. Install the front timing belt cover.




Posted on Nov 27, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 93 Answers

SOURCE: 2005 Suzuki Forenza timing belt breakage

hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart

Posted on Feb 10, 2010

Testimonial: "Really Fast Reply with very good information. THANKS!!"

  • 6 Answers

SOURCE: can't find the fuse box 2005 suzuki forenza wagon

THERES A FUSE BOX THAT SITS INSIDE THE HOOD OF YOUR CAR BY YOUR BATTERY AS WELL AS ONE BY THE SIDE PANEL BY YOUR DRIVER SIDE. EITHER SPOT SHOULD HAVE A FUSE THAT GOES TO YOUR RADIO. I HOPE THIS HELPS YOU!

Posted on Apr 28, 2009

  • 90 Answers

SOURCE: I WANT TO KNOW THE TIMING MARKS FOR SUZUKI FORENZA

just mark the pulleys with tip-ex ,same thing and youd be finished in half the time

Posted on Feb 21, 2010

  • 69 Answers

SOURCE: check transmission fluid on a 2005 suzuki forenza

there should be two fluid level rods under the hood...1 for the oil.. and the othere from the transmission fluid... bes shore to the the fluid while the engine is running and is a normal operation temp..

Posted on Jul 20, 2010

tgv1501
  • 870 Answers

SOURCE: where do you put transmission fluid in my 2005

it goes from the dipstick. Can you locate the dipstick?

Posted on Dec 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt


alldata.com
its 50 steps, im not typing them
direct link

http://www.scantool.net/software/alldata-diy-1-month-subscription.html

Dec 01, 2013 | 2005 Suzuki Forenza

1 Answer

I replaced the timing belt on a 05 suzuki forenza and not i cannot figure out which mark to use on the exhaust cam pulley


  • Hear are the timing marks fora a 2005 Suzuki Forenza 2.0

  • Crankshaft gear to the bottom of the rear timing belt cover ----


ironfist109_352.jpg


  • Camshaft gear to Camshaft cover ---

ironfist109_353.jpg


  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 10, 2011 | 2005 Suzuki Forenza

2 Answers

2005 suzuki forenza owners manuel


Engine light stays on after overfilling the gas tank. How to turn off the light.

Jun 30, 2011 | 2005 Suzuki Forenza

1 Answer

2005 suzuki forenza how many quarts of oil does it hold


2005 SUZUKI FORENZA 2.0L 4-cyl Engine Code DOHC
Engine Oil capacity with new filter is 4.3 quarts.
Be sure to recheck oil level after engine has run for 5-10 minutes. Do not overfill.
Please rate this answer by clicking on the "HANDS" below.

Feb 09, 2011 | 2005 Suzuki Forenza

1 Answer

2005 Suzuki Forenza S Oxygen Sensor replacement


You will need to splice in the universal ones.

Jul 30, 2010 | 2005 Suzuki Forenza

1 Answer

I WANT TO KNOW THE TIMING MARKS FOR SUZUKI FORENZA 2005


just mark the pulleys with tip-ex ,same thing and youd be finished in half the time

Feb 21, 2010 | 2005 Suzuki Forenza

1 Answer

My 2005 suzuki forenza wont start , Ive tried compression which is fine, sparrk which is good and new fuel relay, its good and gets frul


All a good start. You must consider timing. If the timing is off it will not fire correctly. There are cam and crank sensors that do the job, they must be checked.

Feb 01, 2010 | 2005 Suzuki Forenza

Not finding what you are looking for?
2005 Suzuki Forenza Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...