Question about 2008 Dodge Charger

2 Answers

How to retract the plunger in the rear caliper

Posted by on

  • KEN LaPOINT
    KEN LaPOINT May 11, 2010

    Carefully squeeze piston with over-sized channel lock pliers back into the housing by placing one lip of the pliers on the piston and the other over the back of the housing. Be careful not to wedge at an angle when depressing.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

C-Clamp

Posted on May 08, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

For many rear calipers you have to screw them in. On a Honda I used needle now pliers. I put the tips in the slots on the face of the piston and turned it.

Posted on May 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 jeep patirot rear caliper piston won't retract


I personally use a big C CLAMP gently squeeze it in

Apr 18, 2014 | 2008 Jeep Patriot

1 Answer

Retract rear caliper piston


Try opening the brake bleeder. Some foreign models have a screw in the rear of the caliper that retracts the piston.

Oct 31, 2013 | Volkswagen Cars & Trucks

1 Answer

2004 chevy astro van new rear brake pads seem too thick


did you turn the rotors some times there ia ridge on the rotors that needs to be machined down.

Jan 24, 2013 | Cars & Trucks

1 Answer

How to put rear brakes on


Remove the caliper mounting bolts and remove the caliper. Replace brake pads as necessary. Special tool is required to retract caliper piston to fit over new pads. (see picture below)
Retract piston in caliper using special tool to rotate clockwise and make sure the notch in the piston is aligned properly so the tab on the inner pad will fit in properly.
Reinstall caliper assembly and caliper mounting bolts.


5_28_2012_9_32_09_am.jpg

May 28, 2012 | 1997 Honda Accord

1 Answer

How to retract brake caliper piston?


Hi, if this is a front caliper that is still on the rotor, I pry between the rotor and rear brake pad to push the piston in. I usually have to pull on the caliper a bit to get it retracted enough to get a screwdriver in between. If the caliper is already off the rotor, I leave the old inside pad on the piston and put a large c-clamp over the caliper to push on the pad and retract the piston. If this is a rear disk caliper or if you have any questions, please reply.

Jul 31, 2011 | 2004 Buick LeSabre

1 Answer

Retract the caliper piston on 2008 rear brakes


You need to retract the parking brake adjuster. Look for a plug on the back of the caliper. It is a seal plug. Don't loose the seal on the plug. Usually there is an allen screw under the plug. back this off to retract the caliper.

Dec 04, 2010 | 2008 Dodge Grand Caravan

1 Answer

How do i retract the rear brake plunger on my 08 grand caravan?


There is a tool that must be aqiured which fits into the piston caliper, you must turn the piston in to retract it.

Jul 02, 2009 | 2002 Dodge Grand Caravan

1 Answer

Rear brakes on 2005 ford 500


On my Chevy, I use a prybar between the rotor and the caliper to retract it a little, once it's off, I use a 6-in. C-clamp to fully retract it.
Make sure the reservoir doesn't overflow!

Apr 26, 2009 | 2006 Ford Five Hundred

1 Answer

Ford fivehundredright rear brake caliper wont retract


Is this the ratcheting style caliper? If so, you really should be using the proper tool to turn these style calipers back into their bore, and both calipers should turn clockwise to retract them back in. Also, if the piston was too far out you may have a hard time getting it to go back in. Hope this helps.

Feb 23, 2009 | 2006 Ford Five Hundred

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...