Question about 2006 Chrysler Sebring

Open Question

2008 chrysler sebring window off track

How to put back on track

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 1986 Answers

SOURCE: my driver side window has come off its track on a

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you'll be able to get to the tracks. You may need to get some replacement clips to remount the window to the track

Posted on Oct 08, 2009

Testimonial: "Thank you for your quick response this was great information for fixing the window"

Ad
tbyoung
  • 154 Answers

SOURCE: where can i find a diagram for a serpentine belt,

Here you go. I hope this helps you.
d379ab8.jpg
8c8f663.jpg

Posted on Jun 24, 2010

luke_bradfor
  • 662 Answers

SOURCE: What does this symbol (!) mean when it lights up

if it is red in color, it means that your brake fluid level is low, so immediately top it up....the brake master cylinder is under the bonnet......

Posted on Jun 28, 2010

  • 1 Answer

SOURCE: I have a 2008 Chrysler Sebring Convertible. I let

i think the button for put back on is not working maybe it dislocate.

Posted on Oct 18, 2010

johnjnail
  • 1702 Answers

SOURCE: need a picture of the

we get asked this a lot and to save looking up every car that comes to this sight we now direct you to the gates web sight so you can down load the diagram book for your self and look up you make and model. so hear is the web sight.



http://www.doocu.com/pdf/search/gates+auto+belt+routing

Posted on Apr 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to I fix a window that won't stay on its track


remove the door panel and inside the door at the bottom of the track you will find a bolt that adjusts the window track position
put the window down as far as possible and adjust the track back tight against the glass and tension up the nut

Jun 23, 2015 | Cars & Trucks

2 Answers

How do i get it back on track


remove innder door panel and carefully put it back on track

Jun 08, 2015 | 1993 Chrysler Imperial

2 Answers

The front passenger window in my 2004 freelander has dropped how do I fix it.


pull out the door panel and put it back on the track just the window up and then slid it back on the track and tighten the bolts on the track : )

Jan 15, 2013 | 2004 Land Rover FreeLander

1 Answer

How to put window on passenger side back on track


take the door panel off... put the window in down position... now you should be able to work the window up with your hands and you will be able to see inside the door where the tracks are and where the window needs to go... just line it up in the tracks and let it come down into place... you will need some good adhesive or silicon in the bottom track which holds the window in place and keeps it from being able to get out of the tracks ...put the adhesive in the bottom track before you push the window all the way down into the bottom track... roll up the window all the way but do not roll it down again until the adhesive has had time to dry fully... replace door panel

Mar 25, 2011 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Hello my right power window is off track.how hard is it to dismantle and put window back on track.How do i get to the window/glass


You remove the door panel,to get to everything.
You may have to replace the window regulator or cable.
You don't just put it back on track,it broke.
Were long sleeves and thin gloves,to avoid cuts,while working inside the door panel

May 12, 2010 | 1998 Ford Expedition

1 Answer

How to put side doors back on the track so they can open and close without any problems


this happened on my 87 stretch caravan once I had to remove the bottom slider track and slip the little wheel back in the track and then bolt track back on one half and then slide door to get other half

Dec 19, 2009 | 1999 Chevrolet Venture

2 Answers

I have a 06 saturn ion. my window will go up


towards the back of the door is a short track that runs left to right. there should be a nut either loose or missing on this track. put loctite on the stud, then put the nut back on. do this AFTER the window is back on track.

Apr 22, 2009 | 2006 Saturn ION

2 Answers

Locked out of vehicle Broke out sliding center section


Put the top part first, and the lift it until you can put the lower part in and lower it.

Mar 29, 2009 | 2005 Dodge Ram 2500 Truck

1 Answer

Why does my window come off track in my 91 accord?


Could be the tracks have slipped so the window isn't guided well any more or they stick in one track and get cocked as they move up and down. You can try lubricating the window tracks with Armor All (use a Q-tip). It might be necessary to remove the interior door panel to make sure the window tracks aren't loose. There is screw at the bottom of each track that allows some adjustment. If you go to this extent, it might be worth it to remove the glass (just two screws hold it to the regulator mechanism), clean the edges and lubricate the whole length of the track.

Jan 22, 2009 | 1991 Honda Accord

1 Answer

2002 Mitsubishi Mirage Driver Side Window


If it is a power window you will need to get a new motor for it.If its' a manual window crank it's just off the track you just gotta pull the door panel off to put it back on track you might have to go to a junk yard to get the parts to put it back on track.

Nov 06, 2008 | 2000 Mitsubishi Mirage

Not finding what you are looking for?
2006 Chrysler Sebring Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...