Question about Mazda Cars & Trucks

Open Question

Ways remove harmonic balancer bolt - Mazda Cars & Trucks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

seans46
  • 161 Answers

SOURCE: how to remove a harmonic balancer bolt from a 98 nissan maxima

In the past I have had to use a 1 inch impact to brake that bolt loose. It is a monster and it is regular thread. If you dont have a big compressor and super impact I have held the engine a made a breaker bar and broke it loose that way and make sure to keep spraying it.

Posted on May 24, 2009

  • 3600 Answers

SOURCE: which way do you turn the harmonic balancer bolt

Couter clcok wise, normally it is hard to do if you don't have a air impact wrench, If you have a stick shift put in first gear and put foot on brake whlie trying to do this. And if it still won't brake loose use a hammer to hit your wrech or socker breaker bar to break it loose. It is not that easy to get off sometimes. Good luck.

Posted on Aug 26, 2009

co7196
  • 3433 Answers

SOURCE: cannot remove harmonic balancer bolt on 96 honda (2.2L)

You may need an impact gun. If loctite was used, you will need a gun.

Posted on Sep 13, 2009

BCAS1298
  • 3092 Answers

SOURCE: how to remove harmonic balancer pulley from 2000

Remove serpentine belt, to remove bolt turn counter clock wise, you will also need a Harmonic Balancer pulley tool, most auto part places will rent this tool out, good luck, hope this was very helpful.

Posted on May 19, 2010

BAMOUT
  • 2478 Answers

SOURCE: 2001 Ford Taurus, Harmonic balancer removal

A impact wrench is the thing. Probably doesn't fit, they spin it right out. I've put the pulley back on and put chain wrench or strap wrench around the pulley to hold the engine from turning.

Posted on Dec 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove a harmonic balancer on a 1966 chevy c10. Also is there a bolt I need to remove first? And is there a key way. So I can make sure it goes back on in the right position?


you will need a harmonic balance pulling tool to remove it, there is a bolt that keeps it fastened to the end of the crankshaft. its in the centre of the balancer and yes there is a key way that locates the balancer on the crankshaft and causes the balancer to turn with the crank without spinning on it.

Mar 11, 2015 | Chevrolet Cars & Trucks

3 Answers

Harmonic balancer removal


Hello:

I have removed several of the harmonic balancer bolts, and it is difficult to hold the harmonic balancer from spinning when you remove the bolt. The bolt is normal thread, and removal is counterclockwise. There is a Honda holding tool you can get, or possibly borrow from a autoparts store. I always use either an impact wrench or a long breaker bar, and hold the harmonic balancer from rotating with a chain style wrench. I use an old belt to keep from damaging the damper pulley.
Good luck!

Apr 18, 2014 | 1998 Honda Civic

1 Answer

Harmonic balancer


remove center bolts and with puller remove the harmonic balancer.then after,to replace install harmonic balancer and the center big bolt with air gun tight it until it sit

Aug 07, 2013 | Oldsmobile Delta 88 Cars & Trucks

1 Answer

I need to replace the crank shaft sensor


Yes. Jack the car up securely. you need to take passenger wheel off.remove caliper off . remove rotor. remove shock assembly and wheel bearing assembly slide.axleshaft out of the way.take serpinetine belt off. remove cover so you can see and access harmonic balancer.use impact to take bolt out of harmonic balancer.use wheel puller to take off harmonic balancer. Crank sensor should be right under harmonic balancer.

Jan 05, 2012 | 1994 Oldsmobile 88

1 Answer

How do i remove harmonic balancer & replace


YOU NEED A HARMONIC BALANCER PULLER TOOL AND A 15M SIX POINT SOCKET TO REMOVE HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY WHEEL HOLES TO KEEP ENGINE FROM TURNING WHEN YOU LOOSEN THE HARMONIC BALANCE BOLT. ALSO SCREW DRIVER AND PUNCH CAN KEEP ENGINE FROM TURNING WHEN REMOVER THE HARMONIC BALANCER. YOU WILL NEED A HELPER TO HOLD PUNCH OR SCREW DRIVER WHILE YOU LOOSEN THE BOLT. YOU CAN GO TO SEARS OR ANY AUTO PARTS STORE AND BUY HARMONIC BALANCER PULLER.TORQUE HARMONIC BALANCER BOLT TO 76 FT LBS.

Apr 23, 2011 | 2003 Pontiac Montana

2 Answers

The bolt will not come out og the harmonic balancer


try useing an air impact gun the vibration from the gun usally vibrates them off good luck

Dec 13, 2010 | Oldsmobile Achieva Cars & Trucks

2 Answers

How do i remove the harmonic balancer bolt to replace the timing cocer gasket on a 1999 ford tarus se


If there is no air-compressor and an impact gun to remove the harmonic balancer bolt, then there are two other ways to remove it. Either remove the inspection cover at the bell-housing and use a large flat head screwdriver to wedge between the flex-plate drive gear teeth and the engine block so that the engine is locked-up, and then remove the harmonic balancer bolt with a long breaker bar and a lot of muscle power, or for the more advanced mechanics and only they should attempt this, place a long breaker bar on the harmonic balancer bolt and then brace the breaker bar up against the frame of the vehicle so that when the engine turns over the breaker bar will stop on the vehicle frame, and keep in mind that the crankshaft will turn clockwise or to the right, and when you are looking for some place to brace the breaker bar be sure that nothing else will get in the way or it will be damaged. Be sure that the breaker bar is on the harmonic balancer bolt properly, and place the breaker bar about 1 to 2 inches from the vehicle frame so that when the engine turns the breaker bar will lock up against the vehicle frame, and while holding the breaker bar in place have someone turn the ignition key and give the starter a bump, and be very sure to keep your hand away from where the breaker bar is going to contact the vehicle frame, or your fingers will get smashed by the breaker bar when it turns into the frame so do not attempt this if you are unfamiliar with using hand tools, and the starter should break the harmonic balancer bolt loose easily, so be very sure that your hands are out of the way of getting hurt when the starter motor is used to break the harmonic balancer bolt loose.

Sep 13, 2010 | Ford Taurus Cars & Trucks

1 Answer

REMOVING HARMONIC BALANCER


to remove the balancer you will need to remove the belt, the remove the bolt off the balancer then use a puller to remove the balancer,to install line up the key way slide balancer back on and then tight bolt,

May 13, 2010 | 1992 Buick Century

1 Answer

I need a how to to change harmonic balancer for 1995 nissan maxima. step by step


First remove right front tire and support vehicle with a jack stand. Remove splash guard lower portion near the harmonic balancer. Remove all drive belts. First remove the A/C alternator belt. Loosen the 14mm bolt at the front of the belt tenioner and then loosen the tensioner bolt (it is the one that stands out, you use a socket on it.). The power steering adjuster bolt with be gained from the bottom. It has a 12mm bolt head on it. You will break the jamb bolt loose first and then loosen the adjusting bolt. Pull down on the belt the help move it after you've loosened it some.Then remove harmonic balancer bolt (19mm).If the harmonic balancer will not slide off the crankshaft then use a two finger gear puller. Place the harmonic balancer bolt back in the crankshaft but do not tighten it. Leave it about a half inch from being all the way in. Next place the puller onto the harmonic balancer (one finger on each side securely press into the belt groove. The center puller bolt will rest against the harmonic balancer bolt head. Tighten the puller bolt and make sure the harmonice balancer bolt does not turn. The balancer should come off at this point.

Aug 26, 2009 | Nissan Maxima Cars & Trucks

2 Answers

Harmonic balancer


what are the steps to removing a harmonic balancers

Oct 18, 2008 | 1997 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...