Question about Cars & Trucks

Open Question

TIMING MARK GOLF 1.6 MK5

HI I WOULD LIKE TO KNOW WHERE THE TIMNG BELT MARKS ARE ON THE GOLF MKV 1.6 PETROL

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 58 Answers

SOURCE: geo metro timing diagram

woot i feel your pain i had the same problem. go to autozone.com and go to thier vehicle repair.
enter your year make and model and find it. but please hear me on this one.. be carfule thier are like 2 timing references and one timing mark. USE THE DOT. pls i learned the hard way. lol use the dot on the cam sproket. good luck

Posted on Jan 29, 2009

Ad
skdeepak88
  • 232 Answers

SOURCE: desparetly need diagram for 1990 volkswagen golf 1.8 timing marks

http://images.eurotuner.com/images/eurp_0801_07_z+2001_vw_golf_1-8t+1-8_liter_20v_engine_atp_gt28rs_turbo_vf_engineering_engine_mount_usrt_genesis_415cc_injectors.jpg please rate me!!

Posted on Aug 16, 2009

  • 2 Answers

SOURCE: Timing mark locations on EJ22 subaru engine

Complete instructions including pictures for the 22 http://www.subaruvanagon.com/tom/Timing%20Belt.htm

Posted on Dec 28, 2009

  • 1757 Answers

SOURCE: timing marks on twin overhead cams 2.4 and crank mark.

Click on the following direct, Free Link. It has several Diagrams including the Timing Belt + Marks for your 2004 Hyundai Sonata 2.4L DOHC In-Line 4-Cylinder Engine (located on the bottom half of the Page on the Link). There are additional Diagrams that will prove to be helpful while you are doing this...

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Apr 16, 2010

Testimonial: "tHANKS, tHIS WILL DO THE JOB."

TDISLine
  • 1874 Answers

SOURCE: hi! can i got some pictures how to timing timing

The timing belt diagram for VW Golf 2000 1.4 petrol:

b62ff36.png

Posted on Jul 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset timing marks after replacing a broken timing belt?


Land Rover Freelander 2002-2005 KV6 Timming belt and ...

? 4:31
https://www.youtube.com/watch?v=sz_oe9tIFH4
Jul 3, 2011 - Uploaded by Jaime Depaula
Land Rover Freelander 2002-2005 KV6 Timming belt andreplacing valves - Video 2 ... shops in North Eastern USA for bent valves and timing belt change? .... Land Rover 200tdiTiming Belt -From Broken Belt to Retiming the ...

ROVER K Series Cambelt Change Video - YouTube

? 10:52
https://www.youtube.com/watch?v=1Qn8ljQKZxA
May 4, 2012 - Uploaded by metalworker007
How to change a rover K series cam belt .. by Technozen of ...soy espa?ol porfavor quiero saber timing marks de MG ROVER 25 petrol 1795cc engen .... Hi, Have a Land Rover Freelander1999 petrol serie K, that dont start, ...

Freelander 1.8i timing belt - Land Rover Technical Archive - LR4x4 ...

forums.lr4x4.com > ... > Tech Archive > Land Rover Technical Archive

Nov 20, 2006 - 1 post - ‎1 author
The following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should look like this. Posted Image

How to Replace timing belt on Land Rover Freelander 2.5 ...




Dec 10, 2015 | 2002 Land Rover Freelander

1 Answer

Timing procedure for 2005 suzuki forenza


what engine, most cars have many choices new.. what is yours.
"Displacement or VIN"
cam
or
spark?
btw its really a Daewoo Lacetti from S.Korea makers.
by a real FSM.
or got to alldata.com and read

here is the list of engines
1.4 L 93 bhp (69 kW) Petrol I4
1.6 L 109 bhp (81 kW) Petrol I4
1.8 L 120 bhp (89 kW) Petrol I4
2.0 L 132 bhp (98 kW) Petrol I4
2.0 L 121 bhp (90 kW) Petrol I4
2.0 L 121 bhp (90 kW) Diesel I4

before working on any car, engines. in the USA (where you?)
open hood, look up see that vacuum and smog tag there
and it tells you what engine you have,
than ask questions based on that.

the USA forenza uses the
The US model line features the 2.0 L 4-cylinder E-TEC II made by General Motors, developing a maximum power of 132 horsepower at 5600 rpm.

this is a DOHC engine, 2 cams
and a belt (rubber band engine)
cam timng, im not repeating the 38 steps in the manual or torques/
but the crank cog mark is down aligned with the bottom pan mark
the cams are both at 12pm, aligned with markes on back top pan.

install (cut and past just first 8 steps) 2.0L E-tec II only)
  1. align the timing mark on the crankshaft gear with the notch on the bottom of the rear timing belt cover.
  2. Align the timing marks on the camshaft gears, using the intake gear mark for the intake gear and the exhaust gear mark for the exhaust gear.
  3. Install the timing belt.
  4. Turn the hex-key tab in a clockwise direction to tension the belt. Turn until the pointer aligns with the notch.
  5. Install the automatic tensioner bolt and tighten to 18 ft. lbs. (25 Nm).
  6. Rotate the crankshaft two full turns clockwise using the crankshaft pulley bolt.
  7. Recheck the automatic tensioner pointer.
  8. Install the front timing belt cover.




Nov 27, 2013 | 2005 Suzuki Forenza

1 Answer

96 golf 2.0 timing marks



  • Here are the timing marks for a 1996 Golf with a 2.0


ironfist109_328.jpg



  • below is the same diagram as above minus my red markings on the timing marks so you can see the actual marks. Remember to mark the rotation of the belt as well after lessening up the tentioner.



ironfist109_329.jpg





  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 08, 2011 | 1990 Volkswagen Golf

1 Answer

NEED TIMING MARK DIAGRAM FOR 1989 GOLF 1.6 DIESEL TO REPLACE TIMING BELT


The timing belt marks diagram for 1989 VW Golf 1.6 Diesel

tdisline_534.jpg
tdisline_535.jpg

May 15, 2011 | 1989 Volkswagen Golf

1 Answer

Fixing the timing belt


  1. Disconnect the negative battery cable and remove the accessory drive belts, crankshaft pulley and the timing belt cover(s).
  2. Temporarily reinstall the crankshaft pulley bolt and turn the crankshaft to TDC of No. 1 piston. The mark on the camshaft sprocket should be aligned with the mark on the inner timing belt cover or the edge of the cylinder head.
  3. With the distributor cap removed, the rotor should be pointing toward the No. 1 mark on the rim of the distributor housing. On 8 valve engines, the notch on the crankshaft pulley should align with the dot on the intermediate shaft sprocket.
  4. Loosen the locknut on the tensioner pulley and turn the tensioner counterclockwise to relieve the tension on the timing belt.
  5. Slide the timing belt from the sprockets.

To install:
  1. Check the alignment of the timing marks. On 16 valve engines, the mark on the tooth should align with the mark on the rear belt cover.
  2. Install the new timing belt and tension the belt so it can be twisted 90 ° at the middle of it's longest section, between the camshaft and intermediate sprockets.
  3. Recheck the alignment of the timing marks and, if correct, turn the engine 2 full revolutions to return to TDC of No. 1 piston. Recheck belt tension and timing marks. Readjust as required. Torque the tensioner nut to 33 ft. lbs. (45 Nm).
  4. Install the belt cover and accessory drive belts.
  5. If the belt is too tight, there will be a growling noise that rises and falls with engine speed.

Apr 01, 2010 | 1993 Volkswagen Golf

1 Answer

WHAT TIMING MARKS DO I USE FOR 1986 TERCEL 3AC TIMING BELT REPLACEMENT


CLICK on the following LINK. It has the Timng Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1986/make/toyota/model/tercel/1986_toyota_tercel_timing_belt_diagram_marks.htm

Feb 28, 2010 | 1986 Toyota Tercel

1 Answer

Need diagram for golf petrol twin cam 51 reg timing belt marks


My apologies for the delayed response. I am going back and answering questions that were never answered.
Click on the following Link. It has all the Diagrams for the Timing Belt you will need.
Before Clicking, let me know if this helped.
Again my sincerest apologies,,..

http://www.2carpros.com/car_repair_information/year/2001/make/volkswagen/model/golf/2001_volkswagen_golf_timing_belt_diagram_marks.htm

Jan 16, 2010 | 2001 Volkswagen Golf

1 Answer

Timing belt


  1. THIS IS FOR GAS ENGINE 4 Cylinders A 2.0L SFI (found in 93% of 1996 Volkswagen Golf)
  2. Disconnect the negative battery cable and remove the accessory drive belts, crankshaft pulley and the timing belt cover(s).
  3. Temporarily reinstall the crankshaft pulley bolt and turn the crankshaft to TDC of No. 1 piston. The mark on the camshaft sprocket should be aligned with the mark on the inner timing belt cover or the edge of the cylinder head.
  4. With the distributor cap removed, the rotor should be pointing toward the No. 1 mark on the rim of the distributor housing. On 8 valve engines, the notch on the crankshaft pulley should align with the dot on the intermediate shaft sprocket.
  5. Loosen the locknut on the tensioner pulley and turn the tensioner counterclockwise to relieve the tension on the timing belt.
  6. Slide the timing belt from the sprockets.

To install:
  1. Check the alignment of the timing marks. On 16 valve engines, the mark on the tooth should align with the mark on the rear belt cover.
  2. Install the new timing belt and tension the belt so it can be twisted 90 ° at the middle of it's longest section, between the camshaft and intermediate sprockets.
  3. Recheck the alignment of the timing marks and, if correct, turn the engine 2 full revolutions to return to TDC of No. 1 piston. Recheck belt tension and timing marks. Readjust as required. Torque the tensioner nut to 33 ft. lbs. (45 Nm).
  4. Install the belt cover and accessory drive belts.
  5. If the belt is too tight, there will be a growling noise that rises and falls with engine speed.

Jan 15, 2010 | 1996 Volkswagen Golf

1 Answer

Timing belt settings


the tension setting for the belt?

or the timing marks? the timing marks differ. best set cyl. no 1 to tdc.. take out no. 1 spark plug and put sumthin long and thin down the hole.. like a long quarter drive extension.. and check to see that cyl 1 is at tdc.. then set your cam to the OT marks marked on the cam pulley and rocker cover... then you have to set the distributor also.. slacken the 13mm bolt for the dizzy clamp... you will find a line on the lip of the dizzy body.. this needs to align with the middle of rotor arm tip... (sumtimes a mark on the roror arm tip)... tension belt and your timing is set.. set your timing incorrectly and the car will run rough and not rev past 5k...

Sep 26, 2008 | 1993 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...