Question about 1995 Ford Ranger Supercab
When I push the clutch stays stuck on 4th,still turns on,
Does this one have a hydraulic clutch? Check the fluid level in the clutch resivoir.
Posted on Nov 28, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 ford ranger clutch
have you check the slave cylinder to see if its moving when someone puts there foot on the clutch.
And check the adjustment on the master cylinder.
Posted on Sep 18, 2008
SOURCE: Stuck in 5th gear
That just recently happened to me. If your stick wont move into any of the gears, then you need a clutch. But if you can shift into the gears but dont go anywhere, then you need a new transmission.
Posted on Jan 22, 2009
SOURCE: 2002 Ford Ranger Clutch Problems
It's not the clutch, it is the clutch slave cylinder. Check the fluid level in the clutch master cylinder and you will see that it will be empty. The problem is the trans has to be removed to replace it.
Posted on Feb 07, 2009
The only adjustment you'll probably need is to get the air out of the clutch line. Loosen the bleeder screw, and put a two or three foot vacuum line on it. Submerse the other end of the line in a bottle of brake fluid. Pump the clutch untill no more bubbles are coming out of the hose into the bottle. Be sure to keep the reservoir topped up while you do this. Hold the clutch down, and tighten the bleeder screw. Some hydraulic clutches do have an adjustment on the rod that goes from the slave cyllinder to the pressure plate. I'm not sure about yours. If there is a nut on the rod, you can adjust it somewhat. You want it set so that there is just a little bit of play between the rod and the pressure plate where the rod goes. If none of this helps, you mayneed to replace the slave cyllinder.
Posted on Sep 27, 2009
Tips for a great answer:
Mar 28, 2012 | Ford Cars & Trucks
Aug 01, 2011 | Ford Ranger Cars & Trucks
Apr 18, 2011 | 1995 Ford Ranger Supercab
Nov 18, 2010 | 1994 Ford Ranger Supercab
May 29, 2009 | 1989 Ford Ranger
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: