Question about Cars & Trucks

Open Question

Mercedes benz DTC 9B55 - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an ESP problem in my Mercedes Benz C220 CDI, 2008 and the problem is an ESP CURRENTLY unavailable. Cruise controls and speedtronic inoperative


It is usually a ABS wheel speed sensor has gone faulty, but you would have to have electronic diagnostic done to read off a fault code (DTC) and maybe a live data scan . Hope this helps

Nov 21, 2014 | 2008 Mercedes-Benz Mercedes Benz C Class

1 Answer

La Senal de ESP de mi E350 4Matic mercedes benz esta encendida y dice que el ESP no funciona?


Reinitialize the system. Close all doors. Start the engine and apply the brake. Turn steering to full left lock and hold for two seconds, turn to right lock for 2 seconds, return to center. Repeat that procedure a couple of times. Move car forward and/or backward at least 30 feet. If there is no reset DTC and no stored or registered DTC, the MIL should go out.

May 01, 2014 | 2008 Mercedes-Benz Mercedes Benz E Class

1 Answer

P2187 and p2189 dtc for which freeze frame was storet


All you have to do is put your vehicle into google
& type: Mercedes OBD P2187 & P2189

Mar 26, 2014 | 2007 Mercedes-Benz R350

1 Answer

What does p2047 mistake means on mercedes benz e class 2004 year/


DTC P2047 Injector fuel supply rail pressure volume via volume control valve- rail pressure too low.
Poss causes1. fuel filter blocked (even Partially)
2.kinked or damaged fuel lines
3.worn fuel pressure pump
4.faulty pressure relief valve
5.blocked tank breathing circuit

Jul 03, 2012 | 2004 Mercedes-Benz Mercedes Benz E Class

1 Answer

Dtc P1519 (pd)


Hi there:

DTC P1519 indicates a problem on IAC Valve Circuit Malfunction.

Check the pinout in THIS LINK.

Hope this helps.

Jun 04, 2012 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

Mercedes C240 check engine light on


When check engine light comes on, one or more diagnostic trouble codes (DTC) are stored inthe engine control module.maxiscan eu702 can do your car help you clear the fault codes.

May 18, 2012 | 2002 Mercedes-Benz C-Class

1 Answer

What does ESP light mean on a cls 500 Mercedes Benz


The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty.
You should access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Check & replace if necessary the brake pedal switch placed above pedals on the support.

If the problem still occurs you should access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS & ESP ECU, and reset it.


tdisline_516.jpg

Feb 10, 2012 | 2006 Mercedes-Benz Mercedes Benz CLS500

1 Answer

Mercedes yellow warning light on engine stuttering


First of all you need to access the Engine Control Module (ECM) using suitable diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC's memored. DTC = Diagnostic Trouble Code. Then you will bu full informed about the root cause of the problem, and you will be able to repair & replace bad pieces and reset the ECM. Then the yellow warning light will turn OFF.

Oct 29, 2011 | 2001 Mercedes-Benz C-Class

1 Answer

Mercedes e220 diesel. 2007. engine light illuminated and dtc fault code 2570. any ideas please.


You need to get the fault code read to find the problem. An indie may have a suitable OBD reader. Don't just reset the light as you could have a major problem.

Jul 05, 2011 | 2007 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...