Question about 2001 Hyundai Santa Fe

1 Answer

Its a stick shift so must put cluch all the way to the floor to start it did this one other time a week ago i pumped the cluch in and out acuple times and it started now i did that a bunch with the cluch and nothing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 5,256 Answers

There is a safety switch on the clutch pedal-it is called a clutch interlock switch. Unless the clutch is depressed (so the switch is on), the power won't pass from the key switch to the starter to start the car. Check your clutch safety switch. It will be up high on the pedal, or mounted close to the pedal so the pedal operation will actuate the switch. It may be defective, or it may have slipped out of position.

Posted on Nov 27, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 504 Answers

SOURCE: about 3 weeks ago my 01 sonata just stopped in mid

check cam SHAFT SENSOR/FUSE /CHECK WITH CODE SCANNER FOR FAULT CODE

Posted on Mar 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Clutch pedal sticks on floor


on the bottom of the clutch housing there is a bleed nipple, like on the brakes, if you have pumped the clutch with out enough fluid in the brake receiver container you would of put air in the clutch system, you need to keep it topped up all the time so its at max. and bleed the clutch, you will need to lift the clutch pedal by hand up and down a few times to get the air out, its not assisted like the brakes so it will take a good few pumps and tightening the nippel when it feels pressure.

Jun 03, 2017 | 2004 Chevrolet Cavalier

1 Answer

2000 chrysler town & country..got a new battery a week ago and now it's having problems starting. After the second or third try if I pump the gas enough it starts. Every now and then it slips to...


dont pump your gas your car is fuel injected did you put the battery in or did some one else is it the correct battery for the car is the car automatic or stick shift need more info plugs and wires will help a car start better

Nov 30, 2010 | 2005 Nissan Sentra

2 Answers

The hydraulic clutch stopped working.It won't shift.There is no pressure on the clutch whne you push it down.


The clutch hydraulic system is very small. Check the resevoir is full. If empty fill. Try clutch. Still problem ? Bleed the clutch slave cylinder at the trans bleeder. You dont bleed this clutch like brakes pumping up several times. Have someone push clutch to the floor and hold it there, then you open and close bleeder while keeping pedal to the floor. Check the fluid level every time you open/close the bleeder as this system is so small and will empty quick.

Nov 16, 2010 | 1994 Mazda 2WD B Series Pickup

1 Answer

With car in nuetral car will not start but as soon as I push clutch in it starts but struggles


you must be new to driving stick shifts all stick shifts u have to push the cluch in to start the car if it is strugeling to start push the gas a few times then push clutch and start vehicale

Aug 04, 2010 | 2001 Mitsubishi Eclipse Spyder

1 Answer

I have a 2004 Pontiac grand am and the check oil light came on today. I had the oil changed 2 weeks ago. Help!


to reset the check oil light on your car. First put the accelarator pedal to the floor , then while holding down pedal turn the key to the run position without starting vehicle, now quickly pump the accelarator pedal 4 - 5 times and hold pedal to floor on 5th pump. Wait for check oil light to flash then turn off key and remove it . Repeat if neccecary

Jan 13, 2010 | 2004 Pontiac Grand Am

1 Answer

I have a 1999 vw beetle a couple of days ago when I had my a/c on it started making a very loud noise. About three weeks ago I had to put freon in the a/c. Is there something wrong with my a/c?


may just be the belt is lose or the cluch is going out. make sure that there is nomore than 1/2" play in belt. even if you have a tenchner it could need to be checked from time to time.

Jul 14, 2009 | 1999 Volkswagen Beetle

1 Answer

Car won't shift gears


It sounds like you have a bad transmission computer. The first thing you should do is have a shop try to scan the TCM for codes.

May 31, 2009 | 1993 Honda Accord

1 Answer

Clutch pedal goes to the floor(new clutch installed 2 wks ago)


that cable fited one side to cluch pedel and ather side fited gear box side where palte which is relecing clutch bearing. dont forget to adjust.

Dec 01, 2008 | 1985 Volkswagen Quantum

1 Answer

Clutch goes to the floor on 1988 HONDA prelude


either your one of the 2 punps on could be bad usually the master slay cinlinder cluch pump

Sep 10, 2008 | 1988 Honda Prelude

Not finding what you are looking for?
2001 Hyundai Santa Fe Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...